PDA

View Full Version : Would this work?


westie
30-05-2012, 09:16 AM
Alright guys, I want a cheap spektrum receiver for a banger I'm putting together as I don't want my micro one to get broke, would these work with the spektrum module we use? Any difference between car & aircraft

Look at this on eBay:

Spektrum Receiver AR6100e 2.4Ghz DSM2 Microlite 6 Channel Micro Rx

http://bit.ly/JUo0JL

Chequered Flag Racing
30-05-2012, 09:52 AM
add says, it is only compatible with DSM2 aircraft radio and module systems

might be so there isn't a clash between air and land systems just like we had with crystals

adon30
30-05-2012, 10:45 AM
There shouldn't be any clash on 2.4 systems.
The module is dsm2 so would need to be compatible with that. Same as having a faast tx & rx.
The system I use is used by aircraft and cars.

fidspeed
30-05-2012, 04:07 PM
I Have a feeling air and surface Spekky systems are not compatible else we would all be running cheapy orange spekky copies for car racing instead of the genuine spekky ones

i of course stand to be corrected

dave

adon30
30-05-2012, 04:45 PM
Is the frsky system not for cars and planes? I bought mine from a place that sells them for gliders etc.
The only difference would be the extra channels and telemetry that we don't use. However with some of the jumps nowadays we do get airborne!! Lol

RogerM
30-05-2012, 06:00 PM
I believe that Spektrum code their surface and air systems differently and thus they are incompatible. I've tried a heli RX with my surface system and they wouldn't bind

fidspeed
30-05-2012, 07:48 PM
I believe that Spektrum code their surface and air systems differently and thus they are incompatible. I've tried a heli RX with my surface system and they wouldn't bind


:thumbsup::thumbsup: me too roger thats how i found out

futaba fasst (and its clones Frsky rxs work on fasst system) do not appear to be surface or air coded though

dave

lordnikon
06-06-2012, 02:30 PM
Hobbyking do a Ground cheapy orange Rx ....

http://www.hobbyking.com/hobbyking/store/__23784__OrangeRx_GR300_Spektrum_DSM2_3Ch_2_4Ghz_G round_Receiver.html

fidspeed
06-06-2012, 04:38 PM
not seen them before well spotted , only drawback i can see is there DSM2 compatabile only so modules will not work .just the later DX3 series that have DSM2 abilities

still worth a look though thanks for info
Fid

metalmickey0
06-06-2012, 05:21 PM
If its got `AR` as the first letters they wont bind. It has to be `SR or MR` to bind with land TX`s And Futaba Fasst wont bind either as tried it, nor will the Acoms version as tried them too.

AR = Aircraft Receiver
SR = Surface Receiver
Mr = Marine Receiver.

Hope this helps

lordnikon
06-06-2012, 06:14 PM
I thought they were GR for the surface radios ?? GR = ground receiver ?? :confused:

fidspeed
06-06-2012, 07:14 PM
I thought they were GR for the surface radios ?? GR = ground receiver ?? :confused: im with you lordnikon:D

im sure they will work with DSM2 suraface TX i think the clue is on the rx label "STR" = steering "THR"= throttle:thumbsup:

i have some orange air type to work with my flight stuff and not had any issues with them

lordnikon
22-10-2012, 11:45 AM
thought i would update this quickly. I have purchased one of these orangy rx receivers and it works fine with my DX3C system. Slightly bigger than a micro spekky rx but loads smaller than the normal sized ones. For £8 cant complain either !!! :D

http://www.hobbyking.com/hobbyking/store/__23784__OrangeRx_GR300_Spektrum_DSM2_3Ch_2_4Ghz_G round_Receiver.html

Col
22-10-2012, 07:10 PM
Nice one!
I'm running an orange one in my latest heli with a DX6i and am extremely impressed so far