Nosram international pro esc

[Naushad]

Got this refurbished by pugs..

But finding it difficult to determine the specs of this esc.

For example what turn limit does it go down to?

Any help appreciated!

[imull]

Is this the old black cased one from the late 80s early 90s? If so, it was very good and probably has a lowish turn limit, say 9t (as modern motors draw more than old ones).

[Naushad]

Thanks for the reply imull

No it's a rectangular red

[Naushad]

CAn anyone help me please?

[imull]

Any chance of uploading a photo?

[Naushad]

Sorry for the delay in reply imull. Pic is from my YZ10 rebuild library. Speedo has been refurbished since then.

Some more info would be great appreciated!

http://i1232.photobucket.com/albums/ff378/naushadaj/photo-9-1.jpg

[pugs]

Sorry for the delay in reply imull. Pic is from my YZ10 rebuild library. Speedo has been refurbished since then.

Some more info would be great appreciated!

http://i1232.photobucket.com/albums/ff378/naushadaj/photo-9-1.jpg

that one had a motor limit of 8 turns or over mate I belive;)

[Naushad]

Cheers Steve!!

[imull]

Looks like its got hot:woot: does it still run ok?

[pugs]

Looks like its got hot:woot: does it still run ok?

yes mate I fixed it;) the wiring looks a lot better too....

[imull]

Nice one :thumbsup: I can remember my mates getting so hot all the solder flowed across the FET tracks (way back in the day). I spent ages cleaning it out between heats and the thing ran perfectly. Built to last, not like today :D

[pugs]

Nice one :thumbsup: I can remember my mates getting so hot all the solder flowed across the FET tracks (way back in the day). I spent ages cleaning it out between heats and the thing ran perfectly. Built to last, not like today :D

cheers:blush: you can't even get the fets off the board on most modern speedo's :woot:

[imull]

Tell me about it, I have a pile with FETs welded to them. :blush: Some you can fix and some you can't and it's entirely random:cry: