i need bullet connectors

[rondoolaa]

hi,

i am after some 3.5mm bullet connectors for my micro batteries,

they are vampire 1800mah 7.4v lipo,

the bullet connectors i have to race with are approx 7.5mm long from rim to end (just the part that goes into battery)

the ones i charge with are approx 9.5mm long from rim to end and would be a lot better to use when i race as the smaller ones can come out after a big jump or a roll,


does anyone know where i can get the longer ones or what brand they are,

you can see the difference and approx sizes in the pics attatched,


thanks for any help, ron

[HOTSHOT III]

Try here:

http://www.modelsport.co.uk/losi-ec3-charger-connectors-male-pk2-/rc-car-products/29910

I'm pretty sure these are 3.5mm as i've used them in the past on brushed motors (soldering the females onto the +ve and -ve terminals so the motor can be easily removed from the car for rebuilding) but you'll need to confirm this with Modelsport and ask them about the length.

[benl]

Hello mate,
I have some 3.5's I ordered up from Giant Shark, I'll measure them up when I get home. Think they were about 10mm long.

[bodgit]

http://www.ebay.co.uk/sch/i.html?_nkw=3.5mm+bullet+connectors&_sacat=0&_odkw=3.5mm+bullit+connectors&_osacat=0

[rondoolaa]

thankyou for the links but the losi ones are only the 7.5mm length ones as i have some and i have looked on ebay but nobody states the length but looking at the pictures on ebay they all look like the smaller size anyway,

look forward to hearing if they are the long ones benl, thanks

and if anyone else knows where i can get the longer 9.5mm (part that goes in battery) 3.5mm bullet connectors please let me know where.

thanks

[benl]

Sorry mate
The Giant Cod ones are only 7.5mm, although I have some unbranded 4mm bullets that I got from my LHS that are about 15mm trouble is they are only marked up as corally type.

[bodgit]

Try on here
http://www.bing.com/search?q=652+3.5mm+reedy+battery+connector&form=MSNH90&qs=n&sk=&x=69&y=21

http://www.teamassociated.com/reedy/parts/batteries/accessories/

If you cant find any that suit I have reedy 652 connectors 6 male 10mm 6 female 8mm (as your measurements) connectors nip. Im not sure they still make them as I got 2 packets of them for a project a while back so I can spare one packet if you need them.