Ashalak
17-07-2012, 08:34 PM
Hi folks,
Just some bits and bats left over which I don't have a use for after having stopped racing, I'm moving house in the coming few weeks and so I am trying to have a clear out!
Fastrax Turf Ripper Tyres
1x pair of rears, 1x pair of slim fronts. Both pairs are still BNIP.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0038.jpg
£9 posted.
Schumacher Wheels/Tyres
1x pair of yellow compound rear Minipins mounted on yellow Proline dish wheels, approximately 60% worn. 1x pair of yellow compound slim front Minipins supplied with Answer-RC DonutZ medium inserts, approximately 10% worn. 1x of yellow compound slim front Cut Stagger Ribs which LOOK brand new, I honestly can't remember using them! Also included in this lot is a BNIP pack of front Proline wheels in yellow.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0048.jpg
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0049.jpg
£20 posted.
Losi 5200mah 60c Xcelorin LiPo Saddle Pack
These LiPo's haven't seen a great deal of use with maybe only 6 or 7 meeting's so they're in really good condition. They've been balance charged after every meeting and always stored approximately 50% charged. The pack comes with the original box, instructions and wiring harness.
SOLD
ORCA 6.5t Brushless Motor
Again this motor has seen only 6 or 7 meetings and is in good condition, there are however some scratches on the underneath of the motor where the anodising has been rubbed away by the chassis; purely superficial.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0040.jpg
£35 posted.
TLR 22 Mid-Motor Custom Painted Bodyshell
This shell whilst having been cut out is brand new and only ever cut and mounted to my car, not long after which I sold the car and had no use then for the body. Since then it's kicked around in my F8 hauler bag. Bare in mind that the bodyshell has been cut to suit a mid-motor TLR 22 configuration. Also included is a brand new wing, just as you would get in a BNIP body.
http://i35.photobucket.com/albums/d181/Ashalak/RC%20Cars/TLR%2022/IMG_4375.jpg
£20 posted.
ProPeak Sigma EQ
This is my treasured charger which I have had for quite a few years now, she's never let me down and always been looked after! To this day the charger is still on parr with anything else you can buy hence why I have never changed it, unfortunately however she's just sitting around in my F8 and I don't intend on racing again anytime soon :(.
If you are unfamiliar with the charger it will charge 1-6 LiPo/LiFe/LiIon, 1-14 NiCD/NiMH and SLA (PB) batteries from 1-6 cells. It will do this up to a charge rate of 6a with a discharge rate of up to 1a. The charger comes with a JST XH balance board, JST EH, PolyQuest and ThunderPower balance board (Basically every possible LiPo balance connector you can think of!), The charger also comes with a seperate 12v input lead with crocodile clips, UK mains lead, Deans charge lead and also a Tamiya charge lead.
This would make a great charger for anyone starting out who didn't want to spend as much on a brand new charger.
SOLD
Savox SC1251MG Low-Profile Servo
The Savox SC1251MG has been used again for approximately 6-7 race meetings and is in great working condition. I did shorten the lead as the standard length is rediculously long for most installs, but this has been done neatly and professionally. The servo comes with its original box and 12 month warranty card.
SOLD
Just some bits and bats left over which I don't have a use for after having stopped racing, I'm moving house in the coming few weeks and so I am trying to have a clear out!
Fastrax Turf Ripper Tyres
1x pair of rears, 1x pair of slim fronts. Both pairs are still BNIP.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0038.jpg
£9 posted.
Schumacher Wheels/Tyres
1x pair of yellow compound rear Minipins mounted on yellow Proline dish wheels, approximately 60% worn. 1x pair of yellow compound slim front Minipins supplied with Answer-RC DonutZ medium inserts, approximately 10% worn. 1x of yellow compound slim front Cut Stagger Ribs which LOOK brand new, I honestly can't remember using them! Also included in this lot is a BNIP pack of front Proline wheels in yellow.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0048.jpg
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0049.jpg
£20 posted.
Losi 5200mah 60c Xcelorin LiPo Saddle Pack
These LiPo's haven't seen a great deal of use with maybe only 6 or 7 meeting's so they're in really good condition. They've been balance charged after every meeting and always stored approximately 50% charged. The pack comes with the original box, instructions and wiring harness.
SOLD
ORCA 6.5t Brushless Motor
Again this motor has seen only 6 or 7 meetings and is in good condition, there are however some scratches on the underneath of the motor where the anodising has been rubbed away by the chassis; purely superficial.
http://i35.photobucket.com/albums/d181/Ashalak/Items%20Forsale/IMAG0040.jpg
£35 posted.
TLR 22 Mid-Motor Custom Painted Bodyshell
This shell whilst having been cut out is brand new and only ever cut and mounted to my car, not long after which I sold the car and had no use then for the body. Since then it's kicked around in my F8 hauler bag. Bare in mind that the bodyshell has been cut to suit a mid-motor TLR 22 configuration. Also included is a brand new wing, just as you would get in a BNIP body.
http://i35.photobucket.com/albums/d181/Ashalak/RC%20Cars/TLR%2022/IMG_4375.jpg
£20 posted.
ProPeak Sigma EQ
This is my treasured charger which I have had for quite a few years now, she's never let me down and always been looked after! To this day the charger is still on parr with anything else you can buy hence why I have never changed it, unfortunately however she's just sitting around in my F8 and I don't intend on racing again anytime soon :(.
If you are unfamiliar with the charger it will charge 1-6 LiPo/LiFe/LiIon, 1-14 NiCD/NiMH and SLA (PB) batteries from 1-6 cells. It will do this up to a charge rate of 6a with a discharge rate of up to 1a. The charger comes with a JST XH balance board, JST EH, PolyQuest and ThunderPower balance board (Basically every possible LiPo balance connector you can think of!), The charger also comes with a seperate 12v input lead with crocodile clips, UK mains lead, Deans charge lead and also a Tamiya charge lead.
This would make a great charger for anyone starting out who didn't want to spend as much on a brand new charger.
SOLD
Savox SC1251MG Low-Profile Servo
The Savox SC1251MG has been used again for approximately 6-7 race meetings and is in great working condition. I did shorten the lead as the standard length is rediculously long for most installs, but this has been done neatly and professionally. The servo comes with its original box and 12 month warranty card.
SOLD