Xray 10th buggy musings

[jimmy]

What are people's thoughts / observations / rumours about the layout of this new Xray 4WD buggy? I emailed to see if I could tease out any clues but they weren't giving anything away.

I'd be surprised if the car wasn't using some geared differentials as they're proving their worth on a lot of tracks. I'd like to see someone try a centre differential / make one as an option - if Xray don't then I'm sure JQ will.

Given the non-existant 10th off road heritage and background of Xray - and coming up against so many established competitors with big teams. How many people are planning to get their hands on this buggy?

[reg]

If they did a 2wd i would probably be tempted,i love the Xray stuff,but i just dont think it looks that nice,they usually look all bling,not RTR black,plus they somtimes go a bit ott with setup options,i just have a feeling its going to be what Team Magic did when the tryed to build a rallyX car,I would love Mugen to give this ago though:thumbsup:

[jimmy]

It might be lovely inside - and a lot of things like anodising might not be finalised yet I'd guess. I just hope they don't put a brick over a vacformer for the bodyshell like they did their 8th buggy :lol:

[reg]

Yeah i hope they do a good job like durango did with regards to the body:thumbsup:
They do make some nice finishing touches,like the silver edge`s on the ali,

How cool would it be if they has diffs the same as the RVM cluches:thumbsup:...turn a screw to set them,no balls,no oil,simplessssssssss:woot:

[Hpi_guy]

It looks a lot like the kyosho, I suspect the inside to look like a B44

[Lonestar]

it wont be any faster or slower than the top dogs, there are no bad cars on the market today.... but it ll ooze quality by every pore, because that s xray s point of difference and their motto:thumbsup:

[shortcoursegoat]

id love a 1/10 with a center dif, would be a nice 410 option, a chassis slightly longer to be able to fit the desc motor mount an slippercenter. all the bits are there get it done durango before i try an disguise my desc as a buggy lol.

[NTS]

I'm really looking forward to it. I run Xray touring cars and have found Associated and Losi buggies disappointing by comparisson in terms of design refinement and quality.

If it is as strong as their TC's and has gear diffs and shocks that need as little maintenance then I'm very interested.

The down side is that as their first attempt there are bound to be some teething troubles...

[DEXtrain]

Who makes the RVM clutches? are they for 1/8 buggy? do they fit dnx 408 ? I want to try them! Link?


Yeah i hope they do a good job like durango did with regards to the body:thumbsup:
They do make some nice finishing touches,like the silver edge`s on the ali,

How cool would it be if they has diffs the same as the RVM cluches:thumbsup:...turn a screw to set them,no balls,no oil,simplessssssssss:woot:

[Peakki]

Some shots http://www.rctech.net/forum/11000061-post19.html

Do you think that the car needs a bumber or not?
That front alu brace looks kind of solid.

I'm counting the laps that I've to run my Lazer still...

[Hpi_guy]

From those photos is definitely is 1/8 scale / Durango 210 inspired with the plastic side pods

[jimmy]

I thought there was some issue with the Aero car because it had a similar metal brace sticking out front? not sure if it was deemed to be OK or not.

[passy]

128 wings, now that's a lot of wing testing :)

[Peakki]

The car is in the pre production prototype meaning that some of the composite parts are already from the final moulds but still many composite parts are only milled prototypes. From around 22 new moulds necessary for this all new project there are around 10 finished and the rest within the production.

In the last couple of weeks the production is running in 3 shifts for 7 days a week to finish everything on time. The first testing was very successful, the lap times comparing the other tested competition cars were better and the handling of the car very good. Of course the quality will be the standard from Xray and the work and servicing on the car are much better than anything else in the market. So with the increasing popularity in this market we expect very high demand and sales.

The temporary project code name is XB4
The concept of suspension is similar like XB9 with drive shaft drive train
The Xray chassis multi flex is incorporated for super easy chassis flex adjustment
Super easy access to all parts makes the work on the car an enjoyment
Gear diffs
Big bore high quality shocks
Easy mounting of the wheels
Exchange of the differential within few seconds, just 4 screws access
Very easy exchange of batteries
Super easy geometry adjustment
Fast exchange and adjustment of the motor
Ultra high quality drive train parts, composite parts, aluminum parts
Ultra low CG
Very clean and smart design of the car and all details
Price level same as market standard
Expected end of October

Sounds something for me :)

[jimmy]

Ah, apparently this was meant for distributors and has been leaked?

[kartdemon]

Or... This was meant to be leaked!

[jimmy]

Nah.... I don't think so!

[fastinfastout]

in typical xray fashion, their shocks will be plastic and crap :lol:

[andys]

Looks pretty boring based on what can be seen...
Hopefully it won't be another JConcepts / B44 clone.

As the current crop of buggies are so good - this will need to be special to attract customers, if it isn't then it will flop IMO.

[lochness42]

in typical xray fashion, their shocks will be plastic and crap :lol:

Surprisingly they are alloy - if they are good - we shall see.

[lochness42]

Looks pretty boring based on what can be seen...
Hopefully it won't be another JConcepts / B44 clone.
Layout is the same - some solutions are different. Anyway car at euros wasn't really final. Moulded bits were, middle part of the car is in development - such as chassis top deck etc.

[NTS]

in typical xray fashion, their shocks will be plastic and crap :lol:

Their TC shocks are plastic yes but crap no! Best shocks I have had, although I confess I haven't tried Tamiya, but still great shocks :)

[mes]

Xray plastic shocks were ok on my T1R, but the car was transformed with TRF shocks. So far, I found only the Yokomo shocks to be on par with Tamiya's, although the Kyosho shocks on my ZX-5SP were pretty close.
Let's just hope that pistons are not mounted with tiny, self-loosening screws...:lol:

Things are starting to get interesting again. There are at least three new 4WDs on the horizon we know of with the Xray, JQ and X-Factory buggies, and TLR capacities seem to be freed up also with the release of the 22SCT... I'm still waiting for the annual B-Max4 revision! :woot:

[cr1tch]

New photo of x ray buggy zoom in to see the X-ray logo on the front of the car
http://www.neobuggy.net/images/News/xray4wd2.jpg

[micholix]

Have a look under:


Www.xray-shop.at/shop/

... And than xray cars!

[johnnygibbon]

any more updates on this car
loving the chunky design reckon it will be a tough little number . and it will be metric tools and bearings ect i presume
hopefully they get the diffs and slipper right on it
it seems to be the biggest thing a modern or new released car needs to handle the abuse we throw at em
cmon xray whats happening and when are they hitting our shops

[johnnygibbon]

This was quoted in rctech.net, unfortunately, were provided no source to see what rumors taken from the air. Intressant läsning oavsett! Interesting reading matter!


Citat: Quote:
The car is in the pre production prototype meaning that some of the composite parts are already from the final moulds but still many composite parts are only milled prototypes. The car is in the pre production prototype meaning That some of the composite parts are Already from the finals but still Moulds Many composite parts are only milled prototypes. From around 22 new moulds necessary for this all new project there are around 10 finished and the rest within the production. From around 22 new Moulds Necessary for this all new project there are around 10 and finished the rest Within the production.

In the last couple of weeks the production is running in 3 shifts for 7 days a week to finish everything on time. In the last couple of weeks the production is running in 3 shifts for 7 days a week to finish everything on time. The first testing was very successful, the lap times comparing the other tested competition cars were better and the handling of the car very good. The first testing was very full duplex, the lap times Comparing The Other tested competition cars were better and the action of the car very good. Of course the quality will be the standard from Xray and the work and servicing on the car are much better than anything else in the market. Of course the quality Will Be the standards from Xray and the work and servicing on the car are much better than anything else in the market. So with the increasing popularity in this market we expect very high demand and sales. So with the Increasing popularity in this market we expect very high demand and sales.

The temporary project code name is XB4 The temporary project code name is xb4
The concept of suspension is similar like XB9 with drive shaft drive train The concept of suspension is similar like XB9 with drive shaft drive train
The Xray chassis multi flex is incorporated for super easy chassis flex adjustment The Xray chassis multiflex is incorporated for super easy chassis flex adjustment
Super easy access to all parts makes the work on the car an enjoyment Super easy access to all parts makes the work on the car than enjoyment
Gear diffs Gear Diffs
Big bore high quality shocks Big bore high quality shocks
Easy mounting of the wheels Easy mounting of the wheels
Exchange of the differential within few seconds, just 4 screws access Exchange of the differential Within few seconds, just 4 screws access
Very easy exchange of batteries Very easy exchange of batteries
Super easy geometry adjustment Super easy geometry adjustment
Fast exchange and adjustment of the motor Fixed exchange and adjustment of the engine
Ultra high quality drive train parts, composite parts, aluminum parts Ultra high quality drive train parts, composite parts, aluminum parts
Ultra low CG Ultra low CG
Very clean and smart design of the car and all details Very clean and smart design of the car and all details
Price level same as market standard Price level Same as market standard
Expected end of October Expected end of October