View Full Version : Weak chassis
Elfwizard
17-09-2006, 06:35 AM
I have broken two chassis. Yes I hit things both times but not hard, just cliped a post last time at slow speed. Are these chassis just weak? It breaks right up front by the front diff, only two screws holding the whole front end on! Is there a fix?
Thanks
omen1975
11-10-2006, 01:15 PM
Hi elf,
Cannot say i've had any trouble with the chassis breaking, I have had some big crashes and our track is very rough with 1/8th style jumps.
It could be something to do with your front end setup?
I run 10 degree hubs with no. 1 (thinest) spacer under the suspension arm front pivot block, my front shocks run a 2 hole plunger/45 wt oil with standard silver springs at 7mm tension, outer hole in tower and inner hole on arm.
Hope this helps.
Best regards
Omen1975
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.