richardj
11-09-2012, 12:43 PM
Itīs showtime - when the Torch is coming. Wide - bad and mercilessly are the characters of this truggy in 1:8 scale. The destructive tyres claws in to the ground like a plow. Even jumps are mastered by the torch as if every ramp is his territory.
TORCH Truggy Kit
4WD all-wheel drive
Complete ball bearings
17mm aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
CVD drive shafts at the front axle
http://www.absima.com/uploads/pics/tr8tkit_torch_n_vl_01.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch N optimal for each track.
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_05.jpg
http://www.absima.com/uploads/pics/tr8tkit_troch_n_kit_chassis_vro_01.jpg
Through the relative far forward tank, radio plate and engine position is the weight distribution in front of the truggy. Thereby you can control the Torch N better in jumps.
At the front axle built CVD shafts. The rear drive shafts are protected by mud guards against dirt an stone chips.
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_06.jpg
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_07.jpg
For perfect driving performance you need suspension arms which resists all. That is why the Torch N has all the plastic parts from the competition truggy T8T.
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts from the T8T
Adjustable wheelbase
Aluminium steering rack
Swaybars at the front and rear axle
Fuel tank with 150ml capacity
Pre-printed body
Length: 590mm
Width: 430mm
Heigth: 220mm
Available now through your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)
Also Available In RTR Form
http://www.absima.com/uploads/pics/tr8trtr_torch_n_vl_01.jpg
Torch N 4WD Nitro RTR
Equipment:
3.5 ccm race engine "F349" with 1.4 KW / 1.9 HP and 33.000 RPM
Race exhaust system
2.4 GHz 2 channel radio control CR2S
3 channel receiver
9 Kg steering servo with metal gear S90MH
4 Kg throttle/brake servo
http://www.oople.com/forums/uploads/pics/tr8tkit_torch_n_vl_01.jpg
TORCH Truggy Kit
4WD all-wheel drive
Complete ball bearings
17mm aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
CVD drive shafts at the front axle
http://www.absima.com/uploads/pics/tr8tkit_torch_n_vl_01.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch N optimal for each track.
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_05.jpg
http://www.absima.com/uploads/pics/tr8tkit_troch_n_kit_chassis_vro_01.jpg
Through the relative far forward tank, radio plate and engine position is the weight distribution in front of the truggy. Thereby you can control the Torch N better in jumps.
At the front axle built CVD shafts. The rear drive shafts are protected by mud guards against dirt an stone chips.
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_06.jpg
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_07.jpg
For perfect driving performance you need suspension arms which resists all. That is why the Torch N has all the plastic parts from the competition truggy T8T.
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts from the T8T
Adjustable wheelbase
Aluminium steering rack
Swaybars at the front and rear axle
Fuel tank with 150ml capacity
Pre-printed body
Length: 590mm
Width: 430mm
Heigth: 220mm
Available now through your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)
Also Available In RTR Form
http://www.absima.com/uploads/pics/tr8trtr_torch_n_vl_01.jpg
Torch N 4WD Nitro RTR
Equipment:
3.5 ccm race engine "F349" with 1.4 KW / 1.9 HP and 33.000 RPM
Race exhaust system
2.4 GHz 2 channel radio control CR2S
3 channel receiver
9 Kg steering servo with metal gear S90MH
4 Kg throttle/brake servo
http://www.oople.com/forums/uploads/pics/tr8tkit_torch_n_vl_01.jpg