richardj
11-09-2012, 12:48 PM
The Torch E is not a normal 1:8 scale truggy. You take 2 LiPo batterys and put it into a monster that is waiting for the elixir for life. The Torch E is based on the competition truggy T8TE.
4WD all-wheel drive
Complete ball bearings
17mm aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
CVD drive shafts at the front axle
Fully adjustable suspension with right-left hand thread
http://www.absima.com/uploads/pics/tr8tekit_torch_e_vl_02.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch E optimal for each track.
http://www.absima.com/uploads/pics/tr8tertr_torch_e_det_02.jpg
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_08.jpg
The plastic parts from the Torch E are same as the parts from the T8TE. That means they are just as strong and flexible. That makes your Torch E to a little competition truggy.
The Torch E is not a normal convertion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.
http://www.absima.com/uploads/pics/tr8tertr_torch_e_det_04.jpg
http://www.absima.com/uploads/pics/tr8tertr_troch_e_rtr_chassis_vro_01.jpg
Through the relative far forward sedentary motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts from the T8TE
Adjustable wheelbase
All-out brushless chassis layout
Aluminium steering rack
Swaybars at the front and rear axle
2 battery boxes rigth/left arranged for optimum weight distribution
pre-printed body
Length: 590mm
Width: 430mm
Heigth: 220mm
Itemnumber: TR8TEKIT
http://www.absima.com/uploads/pics/tr8tertr_torch_e_vl_01.jpg
Torch E 4WD Brushless RTR
Equipment:
2300 KV brushless motor thrust
Water proof 120A brushless ESC thrust A8
2.4 GHz 2 channel radio control CR2S
9 Kg steering servo with metal gear S90MH
3 channel receiver
Available from your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)
4WD all-wheel drive
Complete ball bearings
17mm aluminium big bore shock absorbers
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock towers
CVD drive shafts at the front axle
Fully adjustable suspension with right-left hand thread
http://www.absima.com/uploads/pics/tr8tekit_torch_e_vl_02.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch E optimal for each track.
http://www.absima.com/uploads/pics/tr8tertr_torch_e_det_02.jpg
http://www.absima.com/uploads/pics/tr8trtr_torch_n_det_08.jpg
The plastic parts from the Torch E are same as the parts from the T8TE. That means they are just as strong and flexible. That makes your Torch E to a little competition truggy.
The Torch E is not a normal convertion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.
http://www.absima.com/uploads/pics/tr8tertr_torch_e_det_04.jpg
http://www.absima.com/uploads/pics/tr8tertr_troch_e_rtr_chassis_vro_01.jpg
Through the relative far forward sedentary motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.
Mud guards at the rear axle
Fibre-reinforced high-quality plastic parts from the T8TE
Adjustable wheelbase
All-out brushless chassis layout
Aluminium steering rack
Swaybars at the front and rear axle
2 battery boxes rigth/left arranged for optimum weight distribution
pre-printed body
Length: 590mm
Width: 430mm
Heigth: 220mm
Itemnumber: TR8TEKIT
http://www.absima.com/uploads/pics/tr8tertr_torch_e_vl_01.jpg
Torch E 4WD Brushless RTR
Equipment:
2300 KV brushless motor thrust
Water proof 120A brushless ESC thrust A8
2.4 GHz 2 channel radio control CR2S
9 Kg steering servo with metal gear S90MH
3 channel receiver
Available from your local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)