richardj
11-09-2012, 12:52 PM
The Stoke E based on the chassis from the competion buggy T8. Forget everything you have been fascinated by and introduce yourself to the reality - experience the E-norm.
4WD all-wheel drive
Complete ball bearings
17mm big bore shocks
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock tower
CVD shafts in the front axle
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_kit_rv_03.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Stoke E optimal for each track.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_01.jpg
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_chassis_01.jpg
Through the relative far forward motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.
The Stoke E is not a normal convertion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_06.jpg
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_08.jpg
The plastic parts from the Stoke E are same as the parts from the T8E. That means they are just as strong and flexible. That makes your Stoke E to a little competition buggy.
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastics out of the T8
Adjustable wheelbase
All-out brushless chassis layout
Aluminium steering rack
Swaybars at the front and rear axle
2 battery boxes right/left arranged for optimum weight distribution
Length: 510mm
Width: 300mm
Heigth: 190mm
Itemnumber: TR8EKIT
http://www.absima.com/uploads/pics/tr8ertr_stoke_e_vl_01.jpg
Stoke E 4WD Brushless RTR
Equipment:
2300 KV brushless motor thrust
Water proof 120A brushless ESC thrust A8
2.4 GHz 2 channel radio contol CR2S
9 Kg steering servo with metal gear S90MH
3 channel receiver
Itemnumber: TR8ERTR
Available from local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)
4WD all-wheel drive
Complete ball bearings
17mm big bore shocks
3 differentials
Steel main gear
3mm aluminium chassis plate with side guards
5mm aluminium shock tower
CVD shafts in the front axle
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_kit_rv_03.jpg
Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Stoke E optimal for each track.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_01.jpg
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_chassis_01.jpg
Through the relative far forward motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.
The Stoke E is not a normal convertion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_06.jpg
http://www.absima.com/uploads/pics/tr8ekit_stoke_e_det_08.jpg
The plastic parts from the Stoke E are same as the parts from the T8E. That means they are just as strong and flexible. That makes your Stoke E to a little competition buggy.
Fully adjustable suspension with right-left hand thread
Mud guards at the rear axle
Fibre-reinforced high-quality plastics out of the T8
Adjustable wheelbase
All-out brushless chassis layout
Aluminium steering rack
Swaybars at the front and rear axle
2 battery boxes right/left arranged for optimum weight distribution
Length: 510mm
Width: 300mm
Heigth: 190mm
Itemnumber: TR8EKIT
http://www.absima.com/uploads/pics/tr8ertr_stoke_e_vl_01.jpg
Stoke E 4WD Brushless RTR
Equipment:
2300 KV brushless motor thrust
Water proof 120A brushless ESC thrust A8
2.4 GHz 2 channel radio contol CR2S
9 Kg steering servo with metal gear S90MH
3 channel receiver
Itemnumber: TR8ERTR
Available from local hobby store. Visit www.s-m-d.co.uk (http://www.s-m-d.co.uk)