MiCk B.
12-09-2012, 09:06 PM
Hi,
Due to the differences between the B4 / B4.1 gear box and the C4.1 gear box. A slight addition has to be made to the installation to get the Triad slipper clutch to fit onto the C4.1
For Installation on C4.1
Before installation of the Triad slipper unit. (After removal of existing slipper.)
Place one AS7933 (crush tube, used in rear B4.1 / B44.1 rear axle) followed
by 4 AS7368 (axle shims).
What you want to achieve is when the black topshaft adaptor is installed, it
sits flush with the ground flat on the slipper shaft.
http://www.oople.com/forums/picture.php?albumid=876&pictureid=5478
Any questions on installation, just ask.
MiCk B. :-)
(P-DubRacing)
Due to the differences between the B4 / B4.1 gear box and the C4.1 gear box. A slight addition has to be made to the installation to get the Triad slipper clutch to fit onto the C4.1
For Installation on C4.1
Before installation of the Triad slipper unit. (After removal of existing slipper.)
Place one AS7933 (crush tube, used in rear B4.1 / B44.1 rear axle) followed
by 4 AS7368 (axle shims).
What you want to achieve is when the black topshaft adaptor is installed, it
sits flush with the ground flat on the slipper shaft.
http://www.oople.com/forums/picture.php?albumid=876&pictureid=5478
Any questions on installation, just ask.
MiCk B. :-)
(P-DubRacing)