View Full Version : 410 gearing with a LRP x12 6.5
dbizzle5
14-10-2012, 07:51 PM
what pinion range are people using with an LRP 6.5? Kit spur.
OneKiwi
14-10-2012, 07:59 PM
Depending on the track 18-22
Chalkie
14-10-2012, 08:23 PM
I'd start with a 22t, I used to run a 23t with a 6.5 octa everywhere.
/tobys
14-10-2012, 08:29 PM
Danny, I usually run a 23 on my Reedy round Broxtowe. So 22 prob not a bad starting point.
dbizzle5
14-10-2012, 08:43 PM
ok cheers. Have been running a 20 so probably a bit low.
Conti027
15-10-2012, 12:11 AM
I run a 22 with a Novak 6.5 on a smaller sized track.
Just check your temps make sure your motor and esc don't over heat
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.