Dumbass question time - 2wd front wheels

[jo90]

Just ordered a new set of fronts and rears for the DEX210. Front part number is TD510020. Thing is they are about 5mm wider than the one's i have hear already (bought with the car).

Im assuming i cut these down so they suit the slim tyres ?

I know, dumb question....but i'd rather be certain than chop at them to find i've buggered a set of new wheels.

Ta

John

[NeilRalph77]

You assume correctly, I find the easiest way is to run a sharp knife round the rim 2 or 3 times till the waste falls away.

[Hpi_guy]

I cut mine with lexan body scissors

[TARTMAN]

leave em as is. will not effect the performance but does not look great. seen many leave the inner edge on. I remove mine, either with a dremel or sharpe knife.

[Jason A]

I second the lexan scissors works everytime and leaves a nice clean edge

:)

[Chris-S]

Body scissors then tidy up with the dremel and a sanding drum

[jo90]

Thanks guys, just didnt want to hack into them to find i'd nakered a set.

Cheers

[metalmickey0]

Body scissors then tidy up with the dremel and a sanding drum
Now i do it the other way round. Dremel the extra bit off then tidy up with knife after