help with a SP Reventon Pro

[traffman]

Arghh, i have wired the unit up , it all lights up as per instructions say.

The problem is that when i push the throttle theres no response from the motor.

Tried to figure it out , any one out there that could help .

Sensor lead fitted fine and all the connectors seem soldered up fine.

[DragonRider]

Have you set the esc to the transmitter.

Hold the setup button for 3 seconds when you turn it on, release, then press again to set the neutral, full throttle and press setup again, full brake then setup button again, then switch off and back on and should be hey presto.

[traffman]

Cheers , i tried that but maybe im not doing it correctly.

I shall try again.

[tyreman]

Try reversing the throttle on the transmitter, thats what i did to mine.
Come to think of it i have had to do this since changing to Speed Passion.

[traffman]

Tyreman! you got it.

I reversed the throttle on my Tx.

Lovely jubbly , least i get to race now on sunday.

Thank you both for your replies.

[Sp Tech]

Was this a Futaba radio?

If so, yes throttle has to be reversed just as you can see.

[Big G]

I didn't have any problems with my 3VCS coming from a GT pro. I didn't even have to set the ETAs in the usual neutral-throttle-brake fashion, although after I did do it it performed a lot better!

speedo feels very punchy during a quick blast up the road lol. Full test will be club night indoors night. looking forward to this! :D

Loving the temp check on the programming box

[OneKiwi]

HOw did the test go?
What car/motor etc?

[Big G]

really good on default timing/punch. really like the power delivery and it certainly runs cooler than other ESC's I've tried.