mardave setup and foams

[xray011]

do mardave do a setup sheet?
also i need tyres so what shore front and rear do i get?
i know its down to the carpet but i mostly run at tamworth.
cheers
Alan

[jasond43]

U don't need a set up sheet too basic for that med springs all round damper tube if u have one with 30k diff oil 32 to 35 shore rears trued down to 47mm and 45 to 50 shore fronts trued down to 45mm with 3.5mm ride height front and rear 1.5mm rear pod droop 6 degree castor ie 2mm under the front arms to lean the king pin back and last 1.5 to 2 degrees negative camber front use this as a starting point

[xray011]

cheers Jason
i have no camber ajustment,so how do i change it?
Alan

[John_Parker]

Check out the setup guide on the Mardave web site
http://www.mardave.co.uk/about-us/setup-sheets-docs/mardave-v12ce-setup-manual.html

[jasond43]

u will have to buy the carbon lower plate or the king pin brace

http://www.mardave.co.uk/hop-ups/v12vrxce/v5abc-front-carbon-plate-ce.html

http://www.mardave.co.uk/hop-ups/vrx/example-product-1683.html

the king pin brace will only give you a little bit of camber but the lower plate can give you up to 2.5 of neg camber