Xray Cars Gallery

[DeMogoobra]

Starting of with my own. First is my T4 and the other is my 12th scale that I never ran at all with the original chassis. Milled my own because I hate strapping the batteries down with tape. An sort of inline idea with servo infront.

On Friday my XB4 will be up here as well:thumbsup:
http://rsb.se/gallery/files/2/6/4/6/img_0826.jpg

http://rsb.se/gallery/files/2/6/4/6/img_0893.jpg

[sime46]

Mine. Best buggy build I've ever done. Brilliant car. Hope it goes as well as it built up.
http://i45.photobucket.com/albums/f53/sime46/2F6E8EEB-C9D4-4EF8-873B-D8BA5B2FD2E4-4361-00000336DCFEE260.jpg

[Matt Butcher]

That does look good! Would be interested to hear how it compares to a zx5.

[jamiekerr14]

Very nice-You just made me redo my R10-XB4 wiring haha

Looking good!

Mine. Best buggy build I've ever done. Brilliant car. Hope it goes as well as it built up.
http://i45.photobucket.com/albums/f53/sime46/2F6E8EEB-C9D4-4EF8-873B-D8BA5B2FD2E4-4361-00000336DCFEE260.jpg

[OneKiwi]

Mine, as Jamie said great build, my first xray

http://i30.photobucket.com/albums/c338/simonandhanna/20121212_142143.jpg

[atsang]

My latest build and what a build... best buggy every built... Also decided to add some nice shiney red counter sunk washers to give it a bit more colour :D

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0006_zps8af2b6ad.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0005_zps887a81b0.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0007_zpsf61f901f.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0003_zpsd3076719.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0001_zpsd91d7b5c.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_00121_zps24c27da4.jpg

[sime46]

Very nice-You just made me redo my R10-XB4 wiring haha

Looking good!

Cheers mate. It's a great car. Can't wait to give it a run. Hope it's as good as my 410! Lol

[sime46]

Looking good atsang. Loving the blingy bits. Any of you boys run one yet? Mine will be out Wednesday if my shell is back in time. Fingers crossed.

[jamiekerr14]

Tomorrow morning is its 1st outing.. so fingers crossed it goes well, and that there are no issues!

Pritty confident in it though.. so should be good to see how it goes, as long as the weather is half decent!!

[sime46]

Nice one let me know how it went. The suspense is killing me. Lol

[sime46]

Temporary fix until my pro painted XB4 shell is ready.
http://i45.photobucket.com/albums/f53/sime46/CA7B9981-329E-43A5-AF56-EF0365664BC0-5480-0000044A3D2FB5B2.jpg

[jamiekerr14]

Just got back from a morning racing at TORCH!
http://i237.photobucket.com/albums/ff211/jamiekerr14/IMG_0440_zps96129e6e.jpg

Anyone have an issue with shock cap weeping some oil? noticed on mine a bit of oil, looks like has leaked from shock cap?


(Warning a long write up coming lol)

Started Q1 with a 1st place, on a damp track. Q2-Q3-Q4 were all 2nds and Q5 a 1st. Final was a close battle for 1st changing positions every other lap. But an error by me, cost me 1st place.

Well, the car so far is fantastic to drive for me it felt solid and I was not worried about the durability aspect. Handles a dream even on the box Carpet setup, grips like no tomorrow and generates more traction than even the FS2 does IMHO.

It has enough steering to make 99.99% of drivers turn down there EPA! It reacts well to setup changes and on a damp astro track it is on rails. I would say its a bit of a mix between a DEX410 and a ZX5 FS2. It has the slight aggressive punch/nature of the DEX, but yet still feels very smooth to drive-like the ZX5. I would say its a middle ground between both of those cars. Which is no bad thing in the slightest! Its super quite and very free running for a geared car. Jumps a dream and will be interesting to see what its like in the dry!

Got a few comments on how good it looked on track and let a friend drive it. Who currently runs a FS2. Lets just say-He sounded very very tempted ;)

All in all, I'm super happy about its 1st run. Already back on pace after a few months off racing and a brand new car. With a stock setup.. Verdict- GET ONE!!!!:D

[sime46]

Great news. Thanks Jamie. Exactly what I wanted to hear.

[Robbiejuk]

Temporary fix until my pro painted XB4 shell is ready.
http://i45.photobucket.com/albums/f53/sime46/CA7B9981-329E-43A5-AF56-EF0365664BC0-5480-0000044A3D2FB5B2.jpg

Love the way you have censored the logo on the side :lol:

[sime46]

Cheers Robbie. Tbh I didn't want the Xray to realise what the shell was designed for in case it made it brittle and prone to wearing out. :thumbdown:

[j0pp3]

Soon ready to burn some carpet :drool:


http://joppis.dyndns.org/xray_xb4/xray_xb4_013_overview.jpg

[jamiekerr14]

Bit of a long shot I know, but does anyone have a spare front bulkhead I can buy off them? Seem to have cracked mine slightly. Think it happens just before the start of my final. I was going all guns blazing and hit the pipe, on a rigid section. It was that or playing with the 2wd trucks after racing- dirty racers haha - seems ok.. But would like to replace it if possible, checked few shops and non have stock? Cheers gents!

[sime46]

Sorry dude. Only did our spares order yesterday and not sure exactly what's coming. Some bits are on back order.

[jamiekerr14]

Yeah typically rear is in stock.. but no fronts Which is a bummer. It seems ok-But think 1 hard shunt and it could finally fail. Not the end of the world...

Let me know if you do get any cheers buddy

[sime46]

Deffo mate. We've ordered them so fingers crossed. I'm told the next batch isn't far away so no need to panic yet? Lol

[jamiekerr14]

haha yeah fingers crossed! Yeah Greg said there is a big batch coming after the NY. So not too long to wait worse case!
More time to eat and drink me thinks :thumbsup:

[rcpower]

Which tires are those for carpet running?

thx!

Soon ready to burn some carpet :drool:


http://joppis.dyndns.org/xray_xb4/xray_xb4_013_overview.jpg

[sime46]

Mine with the kit shell. I hated the shape but its growing on me now.
http://i45.photobucket.com/albums/f53/sime46/676F7179-4DE4-4B1D-B4EC-94AA06C734C3-708-0000005461B15CE4.jpg

[JustARcFan]

How does the fs2 shell fit?

[sime46]

It's not miles off. Closest I've found was the SX3 tbh. The chassis is wider at the front so makes other shells tricky to fit it a way good enough to run.

[Pedros20]

Looks cool that mate.
Must admit the shell is growing on me now, like the RB6 has.
Stickers look good too. :thumbsup:

[j0pp3]

Which tires are those for carpet running?

thx!

Swedish Edition 1:10 Slicks 4WD Set :)

http://www.hobbycity.se/product.php?id_product=1867


Cheers

[Jim Birkitt]

My latest build and what a build... best buggy every built... Also decided to add some nice shiney red counter sunk washers to give it a bit more colour :D

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0006_zps8af2b6ad.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0005_zps887a81b0.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0007_zpsf61f901f.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0003_zpsd3076719.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_0001_zpsd91d7b5c.jpg

http://i780.photobucket.com/albums/yy82/Ashley_Tsang/xb4/DSC_00121_zps24c27da4.jpg


got my xb4 on order but want some of these washers where are they available and what size??

thanks

[discothesnake]

Look just like 3mm countersunk. Get them on eBay mate. That's where I got nine.

Dave

[j0pp3]

Here is an example search on counter sink washers at AmainHobbies:
http://www.amainhobbies.com/advanced_search_result.php?keywords=Countersink&x=0&y=0

An alternative is if you want to use cap head screws you might be looking for these kind of washers:
http://www.amainhobbies.com/product_info.php/cPath/1576_699/products_id/35535/n/Racers-Edge-3mm-Aluminum-Cap-Head-Washer-Blue-6

Just examples. Ebay is probably a better source.

Cheers

[atsang]

@jimi126

these washers are the JQ counter sunk washers. the reason i used these are because they include M4 washers which are needed ho hold down the power wires from the speedo and attach them to the chassis...

Think the car needs a bit more colour but bar that the car is fantastic!!!

Had the car out for the first time today and i was absolutely gob smacked!!! I am comparing it to the durango 410 and the xb4 has soo much more steering in comparison. When running the 410 i down use any D/R on my remote and instantly on semi worn mini spikes on astro i had to reduce the steering to 55% on my remote.

The car itself is very smooth and works very well when pushing hard and the car was really settled i believe this was due to the body but i wouldnt have a lot of knowledge in this area.

I had the car set up with the clay set up thats included in the kit and the chassis was set up to be stiff. At the beginning i had a few real nasty knocks and i have to say the plastics and build quality of the car is second to none and along with the build i would highly recommend this car to anyone!!!

Ended up TQ-ing and winning the 4wd tonight but due to small numbers i can only wait til the new year to really see the full potential the car has especially on polished wood.

[sime46]

Ran mine too last night on worn carpet with loads of jumps/obstacles. Track flowed really well. The car was very very good. Mine was set to the carpet setup other than thinner diff oils. As said before, steering is very good. It was very stable and easy to push hard. It was a touch tail happy but clearly a setup change would've tamed in right down. Lots of hairpins in the track so I left it alone as it rotated brilliantly. It is tough as an altercation with a wayward SC truck proved! Overall I'd say this is a great car with bags of potential. I also played with the slipper all night and can safely say the diff gears are more than good enough for the job. Braking hard over bumps would have the rears dancing in the air. If you're on the fence about this car, go and get one. You won't be disappointed.

[Balders]

Did i read somewhere that ball diffs would be an option or was that a pipe dream?
:)

[sime46]

They are an option mate.

[hloland]

[ATTACH]46800[/ATT

[mikeyscott]

V nice

[discothesnake]

Ordered mine tonight and should get on Monday. Can't wait.

[neallewis]

Picked mine up tonight from MB Models (http://www.rccarshop.co.uk/index.php/race-models/race-off-road-electric/team-x-ray/xray-xb4-luxury-1-10th-4wd-buggy-kit-pre-order-deposit.html)...
I'm allowed to paint the body before xmas ;-)
Had a look in the box, perfectly packaged and looks such a quality kit.

[atsang]

I also played with the slipper all night and can safely say the diff gears are more than good enough for the job. Braking hard over bumps would have the rears dancing in the air. If you're on the fence about this car, go and get one. You won't be disappointed.

I agree i had my slipper set quite slack... just to make sure i didn't wreck a diff on the first outting and there is certainly no problem with composite gear... on the plus side graphite composite gears as they wear they will naturally become more free due to graphite being a lubricant... smart design from xray...

[Peakki]

My with 7.5T VST.

Tomorrow maybe to track, if I've the time to paint the body today!

[graveltrap]

My XB4 prior to its first run at Coventry.

Really pleased with its on track performance, already feels on a par to my 410!

[neallewis]

My XB4 prior to its first run at Coventry.

Really pleased with its on track performance, already feels on a par to my 410!

Looks great that, really like the paint.

[mikeyscott]

Looks great that, really like the paint.

Ditto, I think it works very well with the shape of the shell. TBH, prob the best I've seen yet.

[graveltrap]

The painter (jayst on here) did an outstanding job on the shell, just don't tell him some of it is rubbing off already :cry: My bad I didn't have an tape...

Anyways front view...

[GrahamH7060]

Xray buggies are looking really cool chaps , just out of interest , who usually makes the aftermarket "blingy" bits for X-rays? If at all I mean ??

[Peakki]

Tomorrow first laps!

Car with the finished body.

[atsang]

Xray buggies are looking really cool chaps , just out of interest , who usually makes the aftermarket "blingy" bits for X-rays? If at all I mean ??

theres no one specifically doing stuff atm for the xb4 but i got a full set of JQ coloured counter sunk washers bcause they have m3 and m4 washers in it... i used the m4 washers for the wire holders because they are a larger washer and just used m3 screws and then the m3 washers for everything else...

[OneKiwi]

Im thinking that Exotek might start with stuff for it, they are doing a few brands already, why not some colourful alu parts for the XB4

Im sure it won't be long till CF battery straps arrive

Why not something like this:

If Exotek do do stuff then a look at their site shows there is a fair bit that could turn up

[mark christopher]

Google Cso thay do loads of good xray options tho mainly on road.

[ryanlownie]

Our build of the XB4 is now complete.

We've taken a load of photos showing the build process.

Click here to see the gallery. (http://www.facebook.com/media/set/?set=a.10151360410072082.528806.214854077081&type=1)

[racdeaf]

Here my ..
Not run it yet :cry:

http://img.photobucket.com/albums/v115/racgti/9efdfed4975b7bfeed317f3d7ef2aec0.jpg

[jayst]

well the shell is painted just gotta wait for santa to bring the car.:woot:

http://i33.photobucket.com/albums/d96/jamic123/IMG_1069_zps86aa1425.jpg

[smokedsalmonkid]

http://img145.imageshack.us/img145/1482/af603b1001aa479aad4a9cd.jpg (http://imageshack.us/photo/my-images/145/af603b1001aa479aad4a9cd.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img37.imageshack.us/img37/2151/2e215e9975b74c51803d914.jpg (http://imageshack.us/photo/my-images/37/2e215e9975b74c51803d914.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[eoghan.c]

Google Cso thay do loads of good xray options tho mainly on road.

dam right they do and there good alternatives i use a lot of there parts ie drive shafts there just as good as there xray parts :D

[andys]

Xmas present to self :)

http://www.andrewshillito.com/oople/XB4/XB45.jpg
http://www.andrewshillito.com/oople/XB4/XB41.jpg
http://www.andrewshillito.com/oople/XB4/XB42.jpg
http://www.andrewshillito.com/oople/XB4/XB43.jpg
http://www.andrewshillito.com/oople/XB4/XB44.jpg

[sime46]

That one looks fantastic chief. Really cool.

[Martin Wallace]

Thats the shizzle, i want one :wub

[j0pp3]

My XB4. Soon to be tested on carpet.

http://joppis.dyndns.org/xray_xb4/xray_xb4_014_electronics.jpg

http://joppis.dyndns.org/xray_xb4/xray_xb4_019_body.jpg

[orinoco]

Great car to build, loads of space for tidy installs. No slop, no tight fits, high quality. Can't wait to get the shell painted and try it out properly.

[Martin Wallace]

well tidy colin, hope ye keep this baby clean, next year will be good

[discothesnake]

Great car to build, loads of space for tidy installs. No slop, no tight fits, high quality. Can't wait to get the shell painted and try it out properly.

Why did ye not do a tidy install then??? :thumbsup:

Only kidding mate, looks good. Mine is all done too but like you I'm also waiting on the shell.

Is a nice car to build.

[discothesnake]

Great car to build, loads of space for tidy installs. No slop, no tight fits, high quality. Can't wait to get the shell painted and try it out properly.

Why did ye not do a tidy install then??? :thumbsup:

Only kidding mate, looks good. Mine is all done too but like you I'm also waiting on the shell.

Is a nice car to build.

[orinoco]

Tidy for me Dave, not up to your anal standards yet...
Hopefully it drives as well as it builds.

[discothesnake]

Finally got shell back. Still not run it......

[discothesnake]

And one with knickers off....

[Naushad]

Neat install Dave! I'd be interested to know how this compares to Bmax?

[discothesnake]

Cheers Naushad. I won't be running it til next weekend at Chadderton so I will let you know. I've got another B-max4 II w coming and a couple of B-max2 MR's too.

Can't wait to see these cars.

Regards

Dave

[KennyClark]

Its an illness!

[brooksy]

Quite a few of these cars running at Worksop yesterday,all I can say to you guys who've not run them yet is that your in for a very nice surprise! ;-).

By far the best car there(apart from Neil Craggs AE,makes you sick how good that bloke is with an rc car:-),smooth,controllable,look good in the air and very fast!.

Phill

[seth556]

Here's mine, it's a dream to drive.

https://lh4.googleusercontent.com/-oY_3xpz70ls/UOUFo64rQyI/AAAAAAAAE50/Om0GevbttIc/s1024/IMG_20130102_213042.jpg

[neallewis]

My XB4 install...

http://courgette.jml.net/~neal/RC/XB4_install1_s.jpg (http://courgette.jml.net/~neal/RC/XB4_install1.jpg)

http://courgette.jml.net/~neal/RC/XB4_install2_s.jpg (http://courgette.jml.net/~neal/RC/XB4_install2.jpg)

Just want to race it again...

[brooksy]

Any more pics guys?:)

[DekelzMan]

Here's my Beast:

http://www.rctagz.com/XB4.jpg

[brooksy]

Double post

[brooksy]

That looks mint!:wub

Top paint job:drool:

[JohnnyCrash]

Here´s mine, awesome car to drive!

http://forumbilder.se/CD2RB/xb4-blackness.jpg (http://forumbilder.se/CD2RB/xb4-blackness)

http://forumbilder.se/CD2RC/xb4.jpg (http://forumbilder.se/CD2RC/xb4)

[jackeltrader]

1st drive this week....love it to bits, cant stop looking at it :)

[neallewis]

Here's my Beast:

http://www.rctagz.com/XB4.jpg

What black wheels are these?

[JohnM]

They look like the DE Racing wheels for a Durango.

[Richardson]

Here is 3 of ours, mine, Fordys, and Brans

http://i10.photobucket.com/albums/a130/DrJekyll_leigh/Thirteen%20Bodies/100724D1-1374-4DC8-9829-33CEA98A5862-3564-00000291038857D6.jpg

[DekelzMan]

What black wheels are these?

They are DE Racing wheels but they are shared with my Associated B4.1. I found Losi SCTE Hexes are the perfect fit and the offset is only 1mm narrower than the stock hexes.

[jamiekerr14]

My latest shell from Mike Parker @ Number 5 Designs and decals by Jon Miller at RCS Graphic Worx http://i237.photobucket.com/albums/ff211/jamiekerr14/IMG_0716_zps02b154d6.jpg

[mikeyscott]

V nice, just need some torch decals now!

[jamiekerr14]

I have a couple left but they are about the size of the damn car! Any small one's I can nab sunday?

[neallewis]

My latest shell from Mike Parker @ Number 5 Designs and decals by Jon Miller at RCS Graphic Worx

looks great, nice paint by Mike.

[sime46]

Looks really nice mate. Mike at no5 is brilliant.

[andys]

Nice.

I reckon those tyres will be a bit grippy on that carpet though :)

[jamiekerr14]

Cheers chaps! Yeah he's done a cracking job!

haha its the new Prima Felt i'm testing :lol::D

[mikeyscott]

I have a couple left but they are about the size of the damn car! Any small one's I can nab sunday?

Yes I have.

[reg]

http://www.oople.com/forums/picture.php?albumid=666&pictureid=5884

[Pedros20]

That looks really cool mate! Like it!
I'll stick a picture of mine up tomorrow

[reg]

That looks really cool mate! Like it!
I'll stick a picture of mine up tomorrow


Ta:thumbsup: iv taken the stickers off the side though,think it looks a bit odd,

[eoghan.c]

http://i1143.photobucket.com/albums/n630/eoghan-c/20130208_111438_zps80681ef2.jpg

my T4 just after i got it all together :D

[JohnM]

Here's my XB4

[Chesty]

Nice:woot:

I hope breaking up with the Durango wasn't too painful. There was real love there:o

[JohnM]

Don't worry, the Durango still lives on, it's not going anywhere!

Who knows if this doesn't work out, it'll make a return;) but first impressions of the XB4 are very good:drool:

[contrast]

He's mine..

http://i1148.photobucket.com/albums/o564/contrast67/ABE21BE3-90B7-4A47-B33D-3AF6C722BAC3-307-0000002429CC073C.jpg

[brooksy]

:drool::drool::drool:.........

[Origineelreclamebord]

Good to see proper spiked tires are still being used... :lol: The car looks nice and agressive with them on there! (And then I'm not mentioning the ace paintjob) :)

[contrast]

Thanks for the kind comments, the paint job was done by Jon Miller, (RCS Paintwork) and as always does an amazing job...
The full spikes are the only tyres that work on indoor track and take an age to run in...lol
Have to say I've built many cars in my time, and this is simply the best...

[TARTMAN]

I am really falling for this xray XB4. I think i need one in my life...... the K1 may have to go soon to make way for the sexy xray.......

Look amazing on the track to. :thumbsup:

[Oliv996]

Just finished wiring my brand new XB4

http://imageshack.us/a/img541/1165/img0934jc.jpg

http://imageshack.us/a/img689/4427/img0936os.jpg

http://img826.imageshack.us/img826/3476/img0938el.jpg

http://imageshack.us/a/img23/8469/img0941nx.jpg

http://imageshack.us/a/img20/762/img0943so.jpg

[AfroP]

nice!!

that a stainless steel screw kit on there?

[neallewis]

What are the blue stickers on your RS Pro? Also, what's on the servo?

[Tom3012]

Custom stickers on the RS Pro and a PT on the servo...

Great install as always! Wish i could make my cars look as clean!

[neallewis]

Custom stickers on the RS Pro and a PT on the servo...

Great install as always! Wish i could make my cars look as clean!

big pt?

no capacitor/cap bank on the speedo... I wouldn't run it like that.

[lochness42]

big pt?

no capacitor/cap bank on the speedo... I wouldn't run it like that.

There is nice array of caps right next to speedo ;)

[neallewis]

There is nice array of caps right next to speedo ;)

Oh yeah, behind, I didn't see them.

[Tom3012]

Its an original AMB PT with a carbon case ;)

[jayropes]

looks super cool mate,

how did you cover up the wiring? is it a piece of plastic covered in carbon vinyl??

is that a sprektrum micro receiver? i've had problems with mine, i had to use a voltage protector!! a bit weird as non of my other cars have needed one, just the x-ray???? any ideas??

Jay

[ryanlownie]

Here's my XB4.

http://imageshack.us/scaled/thumb/819/95755755.jpg (http://imageshack.us/photo/my-images/819/95755755.jpg/)
http://imageshack.us/scaled/thumb/33/72411174.jpg (http://imageshack.us/photo/my-images/33/72411174.jpg/)

[TARTMAN]

have 2 of them now. one in 4wd and one in 2wd.

awsome cars in both drive trains.

[Lee24h]

My Xray cars minus a t2 008 which is currently in bits but not for much longer

[Kurtje]

My XRAY XB4

https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/946418_10201139571155768_205892932_n.jpg

[AJ Roberts]

My XB4

http://i801.photobucket.com/albums/yy298/andrewjroberts/4e511564170a5319c15adb1164efd4af_zps8dcdbbcb.jpg

[Razer]

http://farm6.staticflickr.com/5343/8833555848_e97df9f314_b.jpg

[TARTMAN]

my Gainsy Graphics designed shell. Of course me being subtle as always with the painted in logo...........:thumbsup:

Getting the same done for my XB9 that's on its way to me...... ;)

[AJ Roberts]

Been sorting the wiring on the XB4

http://i801.photobucket.com/albums/yy298/andrewjroberts/0d245fdeef315c6beeb933ab57678665_zps901fe4e3.jpg

I'm now happy :lol:

[Kelk]

All my cars have an Iron Man theme. Here's my XB4

http://i118.photobucket.com/albums/o111/Kelk111r/RC%20Cars/0b9fbf73a191e0ec6135caa380ca22ec_zps80d5e8c4.jpg

http://i118.photobucket.com/albums/o111/Kelk111r/RC%20Cars/9c7a5fd7b86de1b596cfefc191e8c5ac_zpsda136f21.jpg

http://i118.photobucket.com/albums/o111/Kelk111r/RC%20Cars/560436195b9ea7c09415827902d0d8c6_zps078ecd53.jpg

[discothesnake]

XB4 No.2 at SORC round 5 at Falkirk on Sunday. Superb.

[johnnygibbon]

Best 4wd I have ever raced so far
Love it

[paul whittock]

http://i1051.photobucket.com/albums/s436/whittock1/xray_zpsa50977d1.jpg

[OneKiwi]

Heres a couple of XB4s from our club.
My yellow one and an up and coming young driver Alexander

We are running them pretty close to stock carpet setup and they are working really well.

[Al3xis007]

All my cars have an Iron Man theme. Here's my XB4

http://i118.photobucket.com/albums/o111/Kelk111r/RC%20Cars/560436195b9ea7c09415827902d0d8c6_zps078ecd53.jpg

Surely the front left wishbone is broken? Or is it a doggy pic?

[OneKiwi]

LOL that looks mangled, hope its the pic :thumbsup:

[HeavyD99]

New buggy, old school paint job.

http://i266.photobucket.com/albums/ii267/HeavyD99/XB4.jpg (http://s266.photobucket.com/user/HeavyD99/media/XB4.jpg.html)

[SHY]

Just finished wiring my brand new XB4

http://imageshack.us/a/img541/1165/img0934jc.jpg

http://imageshack.us/a/img689/4427/img0936os.jpg

http://img826.imageshack.us/img826/3476/img0938el.jpg

http://imageshack.us/a/img23/8469/img0941nx.jpg

http://imageshack.us/a/img20/762/img0943so.jpg

Olivier - you are a very sick man! And I love it! :wub

Ordered my XB4 today.

What 2WD are you running now?

Btw I just included your XX-4 into my Model Car History page. Best looking speciment on the planet! :thumbsup:

[Big paul]

That's some neat soldering. Can I ask what solder you use.
Cheers Paul.

[Pedros20]

Here my XB4/2 built a treat, hope it goes as well as it looks

http://i467.photobucket.com/albums/rr33/pedros20/0BB391DC-3812-47E4-B8FB-2A0AF4F74071_zpshaqfaies.jpg (http://s467.photobucket.com/user/pedros20/media/0BB391DC-3812-47E4-B8FB-2A0AF4F74071_zpshaqfaies.jpg.html)

http://i467.photobucket.com/albums/rr33/pedros20/45885C09-AF82-4CC1-8E5F-E13EC7390173_zps8n75ul52.jpg (http://s467.photobucket.com/user/pedros20/media/45885C09-AF82-4CC1-8E5F-E13EC7390173_zps8n75ul52.jpg.html)

[Garry Spice]

61510
heres my '12 my christmas pezzie to myself

[jayropes]

My xb4 14. Loving it!!

[discothesnake]

Very tidy. Nice.

[Adam F]

Here's my 2wd, just waiting for paint....:thumbsup:

[Lee24h]

Gotta admit i like that sticker bomb on your shell adam

[ianski68]

http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1438_zps83a5467a.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1438_zps83a5467a.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1437_zps490b1336.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1437_zps490b1336.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1436_zps9d8c8197.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1436_zps9d8c8197.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1434_zps21045a63.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1434_zps21045a63.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1433_zps9a8330d2.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1433_zps9a8330d2.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1430_zps241ac5a4.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1430_zps241ac5a4.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1429_zpse2c5d76a.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1429_zpse2c5d76a.jpg.html)
http://i417.photobucket.com/albums/pp254/ianski68/Xray%20XB4-14/IMG_1358_zpsedfcef6c.jpg (http://s417.photobucket.com/user/ianski68/media/Xray%20XB4-14/IMG_1358_zpsedfcef6c.jpg.html)

:thumbsup::thumbsup:

[BentKa]

Malin's 2WD and 4WD ready for DHI Cup in Denmark :D

http://i745.photobucket.com/albums/xx96/bent-ka/XB2/XB4_2WD_4WD_zpsaf69c5e1.jpg

Bent

[BentKa]

The 2WD :D

http://i745.photobucket.com/albums/xx96/bent-ka/XB2/XB42WD_zps778e4ce8.jpg

Bent

[ianski68]

very slick dude...:thumbsup:

[Pedros20]

Here's my XB4 2014, newly built this week, fitted with practice shell while the proper one is at the painters.

http://i467.photobucket.com/albums/rr33/pedros20/D73FAC22-2EE5-4894-AC9D-FB7EFAA7DDEA_zps0onawx3t.jpg (http://s467.photobucket.com/user/pedros20/media/D73FAC22-2EE5-4894-AC9D-FB7EFAA7DDEA_zps0onawx3t.jpg.html)

http://i467.photobucket.com/albums/rr33/pedros20/2B326057-CDE7-466D-B07E-B9F23689A15C_zpsi2voilxt.jpg (http://s467.photobucket.com/user/pedros20/media/2B326057-CDE7-466D-B07E-B9F23689A15C_zpsi2voilxt.jpg.html)

http://i467.photobucket.com/albums/rr33/pedros20/09AB6B4A-F317-4904-AC97-19E0FA811B36_zpsmskiyu2m.jpg (http://s467.photobucket.com/user/pedros20/media/09AB6B4A-F317-4904-AC97-19E0FA811B36_zpsmskiyu2m.jpg.html)

[shark]

Nice Pussy:D

[Pedros20]

Cheers top quarnter! 😉

[Chris-S]

Which shell is that ?

[OneKiwi]

Which shell is that ?

+1 I like that... is it a penguin shell?

How does the underside fit?

[Pedros20]

The shell is from a local guy. Gordon Mellish, he makes his own. It's very similar to a bulldog. He'll be at West Bridgeford next Saturday. Don't know if he has any more tbh but you can ask. 👍

[BentKa]

Under the hood of Malin's 2WD and 4WD ;)

http://i745.photobucket.com/albums/xx96/bent-ka/XB4/013_W_zpsaf390482.jpg

Bent

[Allan1875]

Ready for their first outing.

[danDanEFC]

Here is my new car, first chance to play with it tomorrow.


http://i1361.photobucket.com/albums/r663/dandanefc1/763f2992-d93a-4373-9733-d50d16d509f9_zps5da5607d.jpg (http://s1361.photobucket.com/user/dandanefc1/media/763f2992-d93a-4373-9733-d50d16d509f9_zps5da5607d.jpg.html)

May try and get a better picture tomorrow

[Lee1972]

Is that the 2wd version?

[danDanEFC]

Mine is the 2wd. Ran it today for the first time.

[andys]

Ready for their first outing.

Nice :) - Very Nice.

[Lee1972]

Mine is the 2wd. Ran it today for the first time.

How did you get on with it? I run a 4wd and love it and was thinking of upgrading my 2wd as it makes sense to share generic parts.

[Adam F]

62465My two painted...

Edit, will only upload one pic, but you get the idea..

[deano43]

Very nice looking shell fella who did the paint for you

[Adam F]

Painted by Janos at Nagy Designs..

[Chris-S]

62465My two painted...

Edit, will only upload one pic, but you get the idea..

Paint looks good, staggers on the 4wd doesnt!

[Adam F]

Get over it!!!!!! :lol:

[Allan1875]

62465My two painted...

Edit, will only upload one pic, but you get the idea..

Stunning dude :).

Where can i get pink decals for my XRAYS!

Here are mine:

[danDanEFC]

How did you get on with it? I run a 4wd and love it and was thinking of upgrading my 2wd as it makes sense to share generic parts.

Goes well on the astro at SRCC. It hasn't turned me into a European contender yet :-)

2nd week out and I have improved my results and I am running it just as the book says, except for 5000cst oil in the diff.

[Adam F]

Stunning dude :).

Where can i get pink decals for my XRAYS!

Here are mine:

Pink is the way forward..

For decals try Jon at RCS...

[deano43]

Here's my new ride I will be racing it for the first time on Wednesday carnt wait and very exited I think I am going to have a pro painted shell very soon but here's some picys as it is

[deano43]

Another without shell

[deano43]

Another body picy but new pro painted shell ordered from mike parker

[Pedros20]

Here's my XB4 14. Awesome car, superb paint by Si at Bandicoot bodies.

http://i467.photobucket.com/albums/rr33/pedros20/Mobile%20Uploads/F3488392-3F11-4A57-9288-587C89A24201_zps26udkrdi.jpg (http://s467.photobucket.com/user/pedros20/media/Mobile%20Uploads/F3488392-3F11-4A57-9288-587C89A24201_zps26udkrdi.jpg.html)

http://i467.photobucket.com/albums/rr33/pedros20/Mobile%20Uploads/D3FD9398-F61C-4CEE-A44C-63AF3994C3C5_zpsvkt6bnrk.jpg (http://s467.photobucket.com/user/pedros20/media/Mobile%20Uploads/D3FD9398-F61C-4CEE-A44C-63AF3994C3C5_zpsvkt6bnrk.jpg.html)

[Allan1875]

Here's a couple of pictures of my car's on the final grid at the latest round of the Scottish Winter Championship.

[Adam F]

Better pic of my two on some nice black glass... :)

Paint by Janos
Decals by RCS

[JohnM]

Very, very nice mate:thumbsup:

[Lee1972]

Better pic of my two on some nice black glass... :)

Paint by Janos
Decals by RCS

Nice cars, are you using the low profile cut staggers and are you having to stretch them across the wider rim and do you have to trim the bead on the tyre?
Lee

[tinnylad]

My stunning xb4 '14


https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/t31/735479_10151889432821956_2126616105_o.jpg?dl=1

[Adam F]

Nice cars, are you using the low profile cut staggers and are you having to stretch them across the wider rim and do you have to trim the bead on the tyre?
Lee

Nah, just cut the rims down...

Never trimmed the bead, they fit perfectly

[Lee1972]

Cheers

[V6Jim]

Better pic of my two on some nice black glass... :)

Paint by Janos
Decals by RCS

Now, that is a class photograph! And two class cars!

Did you take the picture? If you did then you are most likely a professional photographer, or an extremely competent amateur!

Good job!

Nice.

Jimmy

[Lee24h]

Heres my xb4

[V6Jim]

Here are a couple or three pics of my new Xray. Totally bog standard.

At the moment!
http://i23.photobucket.com/albums/b370/jimsan17/IMG_94155551904521_zps238898a3.jpg (http://s23.photobucket.com/user/jimsan17/media/IMG_94155551904521_zps238898a3.jpg.html)

http://i23.photobucket.com/albums/b370/jimsan17/IMG_94220172719407_zps134a969a.jpg (http://s23.photobucket.com/user/jimsan17/media/IMG_94220172719407_zps134a969a.jpg.html)

http://i23.photobucket.com/albums/b370/jimsan17/IMG_94238643618230_zpsc3b36d47.jpg (http://s23.photobucket.com/user/jimsan17/media/IMG_94238643618230_zpsc3b36d47.jpg.html)

Lovely thing. Still to turn a wheel!

Jimmy

[TARTMAN]

some Maritime off rd wars 2 day world cup pics of my XB4 in 4wd mostly(yellow wheels)
and 2wd White wheels.

:thumbsup::D:woot::thumbsup::):D:p:thumbsup:

[OneKiwi]

Done a shell

Ill get a better pic soon

http://i30.photobucket.com/albums/c338/simonandhanna/20140304_171842.jpg

[Lee1972]

Done a shell

Ill get a better pic soon

http://i30.photobucket.com/albums/c338/simonandhanna/20140304_171842.jpg

Slicks are you running on carpet?

[OneKiwi]

Yes it's the only tyre we are allowed to use indoors. We share the track with TCs

[SHY]

My stunning xb4 '14


https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc1/t31/735479_10151889432821956_2126616105_o.jpg?dl=1

What rear wing is that?

[Pedros20]

I'm pretty sure it's a Schumacher K1 Aero rear wing. :thumbsup:

[SHY]

Ah! Yes of course! And painted with carbon pattern :D

No wait, you can buy it like this! Awesome!!!

http://www.amain.com/product_info.php/cPath/1_25_1462_3305/products_id/273736/n/Schumacher-Cat-K1-Aero-AirFlo-Wing-End-Plate-Set-Carbon

[mattr]

New XB9e, shiny toy....... paint by OneKiwi. Still to have its first run!
http://www.oople.com/forums/picture.php?albumid=1013&pictureid=6462

Got a SkyRC Toro150 ESC, trackstar 4 pole 1900Kv motor, Savöx SA-1283SG servo and currently running a pair of turnigy Nanotech 2s sticks.
May get a gens ace 4s pack (or another pair of 2s sticks).

Also got a tekin RX8 as a back up (got it second hand BNIP for not very much at all!)

[Hans Wynants]

hello , just finished my build. the best car i have even build, its only sinds i build it, i understand why the car is so strong.

full size servo
orion ESC with 6.5T engine
new Spektrum DX4R PRO transmitter

ready to race :p

http://www.mijnalbum.be/Foto-EQM4KOKN.jpg

http://www.mijnalbum.be/Foto-YR87OHQH.jpg

http://www.mijnalbum.be/Foto-X74XQXQB.jpg

[franki]

Better pic of my two on some nice black glass... :)

Paint by Janos
Decals by RCS

Truly stunning

[dafke]

http://i60.tinypic.com/2rf826h.jpg

picture of my xray
after more than one year, I am still happy with the car.
This is the 2nd kit I build
very solid and fast car

viper vtx10r esc
viper 5.5t motor vtx
Xpert brushless low profile servo

[lcpvcce]

XB4 ................. ;)

[xfactor]

:woot: Yes Ken, Lovin that matey.........................:thumbsup:

[lcpvcce]

:woot: Yes Ken, Lovin that matey.........................:thumbsup:

Thanks for your kind of word Mark ........... :D:D

[The Dark Knight]

Looking awesome!

What is the reason why XB4-4wd's come with shock tower braces front & rear but the XB4-2wd's only come with a front shock tower brace?

[SHY]

Looking awesome!

What is the reason why XB4-4wd's come with shock tower braces front & rear but the XB4-2wd's only come with a front shock tower brace?

I think my 2014 4WD also only came with the front one

[Oliv996]

For those which are fed up with heavy chassis, give a chance to this configuration:

http://i.imgur.com/pmJbrmL.jpg

[SHY]

Excellent Olivier!

Can you give us a step-by-step guide as to how to do this mod?

I guess you need a new top plate?

You need a blog... :D

[pitbitch]

Car looks sweet though where can I get that wing :)

[BentKa]

Malin's Xray XB8E LITE '15 with Short Course motor and 2S LiPo for indoors racing on 1/10 tracks.


Orca VX8C ESC
Orca Infinite Ultra 2S | 7500mAh | 90C battery
550 size 4pole 4300KV Short Course motor
Futaba 4PX transmitter
Futaba R304SB-E receiver
Futaba S9353HV servo
Orca 30mm high speed fan
Orca alu. fan mounts.


http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0030_watermarked_zpsec499c26.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0038_watermarked_zpscb7532cf.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0040_watermarked_zps9fe0322c.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0015_watermarked_zpsf88cbe28.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0007Watermarked_zpsf34e25b6.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0011_watermarked_zps3cd944a6.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0009_watermarked_zpsdf947565.jpg

http://i745.photobucket.com/albums/xx96/bent-ka/XB8E/DSC_0046_watermarked_zps33a1bf1c.jpg

[sime46]

Looks fantastic. How does it compare with the traditional style 1/8 electric car??

[BentKa]

Looks fantastic. How does it compare with the traditional style 1/8 electric car??

Same handling but a bit less power.
Which for many actually would mean they are able to control it :lol:

Best comparison would be a Short Course with way better handling :)

Have a short video clip on Malin's Facebook page of the very first test for those interested……

Bent

[stdu007]

XB4 '14

http://img.photobucket.com/albums/v671/stdu007/20150113_094118_zps531f0bf9.jpg (http://smg.photobucket.com/user/stdu007/media/20150113_094118_zps531f0bf9.jpg.html)

http://img.photobucket.com/albums/v671/stdu007/20150113_094200_zps5f6c0906.jpg (http://smg.photobucket.com/user/stdu007/media/20150113_094200_zps5f6c0906.jpg.html)

http://img.photobucket.com/albums/v671/stdu007/20150113_094141_zps35ccb648.jpg (http://smg.photobucket.com/user/stdu007/media/20150113_094141_zps35ccb648.jpg.html)

http://img.photobucket.com/albums/v671/stdu007/20150113_113418_zps218666d9.jpg (http://smg.photobucket.com/user/stdu007/media/20150113_113418_zps218666d9.jpg.html)

[dMITIj]

No one like to show off your XB4 2016? :drool:

[simonrhart]

Here is my XB4 2016 - almost finished, just waiting for the servo mount to arrive in the post then I am ready for some Team Xbox! Credit to Terry Atkinson for the awesome paint job :thumbsup:

I decided on a 7.5T motor in this car - my '15 has a 5.5T in it. The 7.5 is geared with a 22t pinion with stock spur and the 5.5T a 18t pinion.

85190

85191

85192

85193

85194

[arceye]

Here's my xb2. It's my first kit build. Went together pretty well, just had issues with shock bleed screws ( every one of them has rounded off before they were fully in)
Ran it tonight at Seaham and all I can say is wow! Used to run a Durango ( which was great while I learnt how to drive) but this felt so much more responsive and I had confidence in it instantly! Had my best ever results and made back end of B final for first time. Had comments about how the car made me look a good driver, which I'll take lol. Very nice bit of kit xray!

[arceye]

One of the shell

[simonrhart]

Here's my xb2. It's my first kit build. Went together pretty well, just had issues with shock bleed screws ( every one of them has rounded off before they were fully in)
Ran it tonight at Seaham and all I can say is wow! Used to run a Durango ( which was great while I learnt how to drive) but this felt so much more responsive and I had confidence in it instantly! Had my best ever results and made back end of B final for first time. Had comments about how the car made me look a good driver, which I'll take lol. Very nice bit of kit xray!

Looks very nice. I like what you have done with the motor wires. Does the kit come with those wire clips down the side of the car?

My kit should arrive in the post from MB today - although Santa says I can't build it until Christmas day! :thumbdown:

[arceye]

Yeah, all part of the kit. Get it built! I haven't told the Mrs I bought it, so if anyone asks its a modified Durango!

[lee.willows]

Pics of my XB2 and XB4 2016.

Both are Hobbywing ESC, Reedy or Hobbywing Motors, Spektrum Rx and servo and Orion servo.

Both are a joy to drive and work on.

[Wacker 2]

Absolute pleasure to build.

I was really hoping to give it it's first outing today but unfortunately car troubles put a stop to that! :(

http://i1273.photobucket.com/albums/y407/jonseals1/12321599_10208888862641624_5940999011037760592_n_z psxs9zyynp.jpg (http://s1273.photobucket.com/user/jonseals1/media/12321599_10208888862641624_5940999011037760592_n_z psxs9zyynp.jpg.html)

http://i1273.photobucket.com/albums/y407/jonseals1/12802926_10208888864521671_4399409094272430016_n_z psc0wl7foy.jpg (http://s1273.photobucket.com/user/jonseals1/media/12802926_10208888864521671_4399409094272430016_n_z psc0wl7foy.jpg.html)

http://i1273.photobucket.com/albums/y407/jonseals1/12798973_10208888869241789_5966760873031753993_n_z ps8uoucjqc.jpg (http://s1273.photobucket.com/user/jonseals1/media/12798973_10208888869241789_5966760873031753993_n_z ps8uoucjqc.jpg.html)

[fil9144]

Many thanks to Mike
Really good build and I have all my upgrades so really happy

[brooksy]

My two new cars,first run out for them both this weekend at the Mid East regional at Broxtowe

[flymax]

Mine. Best buggy build I've ever done. Brilliant car. Hope it goes as well as it built up.
http://i45.photobucket.com/albums/f53/sime46/2F6E8EEB-C9D4-4EF8-873B-D8BA5B2FD2E4-4361-00000336DCFEE260.jpg
WOW! That's really awesome RC you have....

[brooksy]

My '16 converted to a '17