dex410R

[furball85]

hey guys i bought a Dex410R off a fellow oopler but have since found out this kit is no longer continued now is there much difference between the 410R and the 410v3? or is it more just a name change? also what rear wheels will fit the car has it has the pin rear

thanks for any help

[bigred5765]

still do a 410r http://www.team-durango.com/race-cars/dex410rv3/index.php
but its a 410rv3 model

[bigred5765]

oops

[furball85]

i also meant the 410Rv3 as from what i can see the shock collars have been updated to composite the chassis is thinner, the shell is different and that is it am i correct or not?

[paulc]

Shell is differant , chassis is the same and shock collars are plastic on the v3

[AfroP]

if you get the tresrey or durango alloy hexes you will be able to get the newer wheels

[furball85]

Where is best place to get spares? What upgrades/spares do i need, the car came with. Carbon shock towers front and rear and the tresrey aluminum servo saver crank

[mattr]

At least 95% of the part numbers are identical. Probably more. And i can't think of anything except the hexes and shocks (big bore/small bore) that aren't fully compatible/interchangeable.
Get some tresrey or exotek lock on hexes (about 15 quid for 4, come with everything you need to fit them) then you can use the new wheels. (the old wheels, 12mm and pin, aren't available anywhere anymore)

MB Models ( www.rccarshop.co.uk ) is where i get a lot of my stuff. Or the american sites if i'm not in a hurry.

Have a poke round on the site for some of the other 410 threads, you'll find a few lists of "essential" upgrades. (Much of which aren't really essential!)

[furball85]

so do i purchase the hexes for front and rear and replace the ones that are on car? just making sure i buy right thing first time around lol, yea mb models seem to have 50+ pages of durango 410 stuff thanks for the link :D

[OneKiwi]

If you want to swap to 14mm front and rear then you need both sets.
The original front hexes are smaller

[/tobys]

Exotek do one with a grub screw AND they are Durango Orange - the best of both worlds :thumbsup:

http://www.exotekracing.com/dex210-dex410-14mm-locking-hex-2/

[furball85]

cheers guys i found the treseray ones on mb models website, not bothered about colour as someone at our club does annodizing anyways :) what wheels are best to use sorry about all the questions this is the first buggy i have owned lol

[paulc]

Durango wheels think there the only ones you can use when using the 14mm hex's in either yellow or white

[Col]

This thread: http://www.oople.com/forums/showthread.php?t=116182

Specifically this post: http://www.oople.com/forums/showpost.php?p=718439&postcount=5

[(off)roadrunner]

De racing do 14mm hex wheels. Also the new X-ray xb4 uses 14mm hex so there wheels should be fine too

[furball85]

yea i had read that post already col, but that really only said durango rims which on the website says rears will be in mid december but i found the white rears on jemodels not long after was just wondering what other rims fitted but i will now look at the xray ones :)