K1 Option Parts

[Moss Models]

Sorry if this has been asked but could someone tell me what options from the SX3 will fit the K1.

I will be switching to K1's over the next few months and need to know what to take off the SX3's.

Many thanks

[mark christopher]

shocks/springs
front alloy caster hub
front (front) alloy 10/7 degree inner pin mount (if the 4mm one)
rear alloy hub

[dibble34]

Does anyone know if the new rear m4 rear blocks for the k1 are the same as the sx3 ones, but but drilled out to 4mm?

[Moss Models]

Thanks for that.

Does that mean the pivot blocks are different?

[shaun m]

Does anyone know if the new rear m4 rear blocks for the k1 are the same as the sx3 ones, but but drilled out to 4mm?
don't know , but thats all i done with mine dave , they have loads of material on them ..:)

[shaun m]

Thanks for that.

Does that mean the pivot blocks are different?

i fitted the pivot blocks off my sx3 onto my k1 , just drilled the rear blocks to 4mm..

[dibble34]

Ok cheers Shaun :)

[Moss Models]

Cheers for that. Did you also fit the fronts?

[shaun m]

yes i did , a complete set :)