T3 2012 blinky gearing

[Lee24h]

Just what sort of gearing should i use for 13.5 blinky on a t3 2012
With a 84t (standard spur)
Cheers

[gaz1318]

hi dont think this will much but im running 5.16 fdr on t3 12 with 17.5 blinky
76 spur 28 pinion cheers

[Lee24h]

cheers im going to try a 26 tooth pinion with a 84 tooth spur
gives me 6.14

[single cab]

I'm a rookie on my T3 2012 . I have a SpeedPassion comp. V3.0 7.5t motor and a 100/64p spur . What pinion schould i do ? Maybe for high speed tarmac track and indior carpet .

I was thinking for a 27t 64p pinion about 1:7 ration . I have a 25t 0.4modul pinion and the tooth dont kiss it... Comes there a plate between motor and mount...???

[Lee24h]

I'm a rookie on my T3 2012 . I have a SpeedPassion comp. V3.0 7.5t motor and a 100/64p spur . What pinion schould i do ? Maybe for high speed tarmac track and indior carpet .

I was thinking for a 27t 64p pinion about 1:7 ration . I have a 25t 0.4modul pinion and the tooth dont kiss it... Comes there a plate between motor and mount...???

your fdr is worked out by spur/pinionx1.90 for a t3 2012 a result of 1 will melt the motor a result of 10 will be too quick in acelleration and will lack any top speed

[Chris-S]

Depends on the track and motor/speedo/batteries

[single cab]

My thing 1:6.5-7 ration were good for many high and middle speed tracks . I gave seen the 100spur were good for stock motor class and for my 7.5t motor were the 112spur a good coice...:eh?: