Show us your B-MAX 2

[Tom3012]

Needed to be started so here's mine :p

http://img42.imageshack.us/img42/2499/picture164um.jpg (http://imageshack.us/photo/my-images/42/picture164um.jpg/)

http://img593.imageshack.us/img593/558/picture165s.jpg (http://imageshack.us/photo/my-images/593/picture165s.jpg/)

[ReneT]

http://www.mrit.nl/rc/yoko/klaar.JPG
Dont mind the mock up tires :)

[Reo]

Cant wait to try it!!

[Balders]

second run friday, getting better and better all the time. :wub

[mrspeedy]

Lookin' good Mike .. nice paint .... must admit I'm tempted by the Yoke :wub

... it must be the only FC body that dosen't look like it was designed by Lego !!! :lol:

[Balders]

Lookin' good Mike .. nice paint .... must admit I'm tempted by the Yoke :wub

... it must be the only FC body that dosen't look like it was designed by Lego !!! :lol:

Get one si they are really good, Nancollis Jnr has one and its only a matter of time before senior takes the plunge too.. :)

Maybe you could make a nice phat front wing for it?! :)

[GRIFF55]

Looking good balders. Has bav had a go at breaking it yet?

[Balders]

Looking good balders. Has bav had a go at breaking it yet?

He had a go, wouldn't be surprised if he's already got one in the post... ;)

[J'MM'N]

Old with the new.

[Pedros20]

Just a quick question, can you fit normal saddle lipo's in the Bmax2, looks like you can to me but want to be sure.

[MattK]

Yes you can no problem at all. :)

[Pedros20]

Cheers Mat, very tempted now!

[MattK]

I will be running mine for the first time on friday so will know what it goes like. I am running saddles in the mid motor configuration, layout is designed for it. Car built really well and others have given it some positive reviews.
My own personal reason for choosing this over other 2wd cars on the market is the trend currently of metal chassis, it reminds me too much of the mardave cobra!!!!!
:)

[Pedros20]

Yeah let me know how you get on with it. & what set up you end up with.
I just hope it doesn't understeer to much.

[MattK]

Here she is :wub ready for friday except for tyres (Which I am promised will be in the shop by Friday!!!!)
I am not very good at spraying shells (even after over 15 years of practice!!!) and have no art abilities at all, but I am happy how the shell came out although not what I was trying to do :woot:.


http://i26.photobucket.com/albums/c120/Wildebeest_Racing/DSC_0071_zps9adcdcbc.jpg

[cornishboy176]

Here is my new drive for 2013
http://i1058.photobucket.com/albums/t413/polly176/15FCF977-CFBB-4546-A189-EA1631EE3175-915-0000008B40081A22.jpg

[cryer-evo]

Keep the pics coming lads very nice

[mes]

Still waiting for my conversion kit... :yawn:

[s22jgs]

http://lh4.googleusercontent.com/-QVFF0XJDn_M/URbFxko3RDI/AAAAAAAABEk/s_HeSxp6nQk/s720/WP_20130209_006.jpg

[Gsxrturtle]

49634

[bender]

@ Gsxrturtle

very nice! Thats damn effective :D

[mes]

Indeed!:thumbsup:

[mekios]

My kigndom for a rear motor pic!

[450kid]

http://lh4.googleusercontent.com/-QVFF0XJDn_M/URbFxko3RDI/AAAAAAAABEk/s_HeSxp6nQk/s720/WP_20130209_006.jpg

Liking the wire covers looks like something off matrix!

[xfactor]

Hi all thought i would share my bmax2 with you off body shots tomorrow when complete hope you like.

[Neil78]

That looks awesome mark nice paint work.defiantly need to order me one of these yokomo's

[adey]

All of Marks cars are awesome. I have never seen one of his cars that wasn't superbly built and prepared.

[Chippyjon]

Hi all thought i would share my bmax2 with you off body shots tomorrow when complete hope you like.
looking good

[xfactor]

Cheers lads for the comments i will post pics of under the body tomorrow first run this week at telford if weather ok.:D

[lcpvcce]

Cheers lads for the comments i will post pics of under the body tomorrow first run this week at telford if weather ok.:D

Wow....... what nice kit Mark Another world class ........... :thumbsup:

[Origineelreclamebord]

http://www.oople.com/forums/attachment.php?attachmentid=49634&thumb=1&d=1360751800 (http://www.oople.com/forums/attachment.php?attachmentid=49634&d=1360751800)

That looks ace :thumbsup:

[xfactor]

Hi all, pics of under body.

[Steve Ball]

Hi all thought i would share my bmax2 with you off body shots tomorrow when complete hope you like.

Just gotta work out how to drive now Lapper ;-)

[discostu]

That looks ace :thumbsup:


Is that a big cock under the tekin sticker

Sorry Paul couldn't resist LMAO

Love this paint work.

Stu

[xfactor]

:lol: Hows it going matey GET ONE they are stunning :D

[Steve Ball]

:lol: Hows it going matey GET ONE they are stunning :D

YOU NEVER KNOW! :p

[highlander]

Hi all thaught id share mine along with my new bmax4 2012 hope you all like
http://i557.photobucket.com/albums/ss12/leebennetts/CIMG3389_zps3ea1fdff.jpg
http://i557.photobucket.com/albums/ss12/leebennetts/CIMG3392_zpsb988a9c8.jpg
http://i557.photobucket.com/albums/ss12/leebennetts/CIMG3391_zpsae05da37.jpg

[Gunthar Guntharsën]

This car looks great. Has anyone tried fitting dex210 hexes and wheels? I'm not sure if I want to buy a bmax but it would be nice to know if I could use the wheels I have.

[discothesnake]

Here are my Yoks.

[mes]

Yokomos obviously come in pairs nowadays!:lol:
I need that conversion kit and get my bodies painted...

[Pedros20]

Here are my Yoks.

They look really nice Dave. We'll impressive!

[discothesnake]

They look really nice Dave. We'll impressive!

Cheers Pete.

[AndyG]

This car looks great. Has anyone tried fitting dex210 hexes and wheels? I'm not sure if I want to buy a bmax but it would be nice to know if I could use the wheels I have.

I have - the front wheels are a straight fit. The rear wheels though are obviously a hex fitment. I tries some Tresrey 14mm hexes on, and it's not a fit - big space between the hex and the hub, and even if you filled that with something, you've possible got a different track width.

[Gunthar Guntharsën]

I have - the front wheels are a straight fit. The rear wheels though are obviously a hex fitment. I tries some Tresrey 14mm hexes on, and it's not a fit - big space between the hex and the hub, and even if you filled that with something, you've possible got a different track width.

Thanks for the info, Andy. Much appreciated. :)

[mes]

I use the PL 12mm wheel hexes with B-Max4 wheel spacers underneath. Offset with Kyosho/AE-Style hex wheels is identical to the Yokomo standard pin configuration. Maybe you could try some of the Xray 14mm hexes, which are available in various widths.

[zzztech]

I have - the front wheels are a straight fit. The rear wheels though are obviously a hex fitment. I tries some Tresrey 14mm hexes on, and it's not a fit - big space between the hex and the hub, and even if you filled that with something, you've possible got a different track width.

So DEX210 front wheel are not hex and uses bearings with a screw like Yokomo? I'm completely out of front wheels :cry:

[Pedros20]

So heres a couple of pictures of mine, lovely build as i expected, looking forward to running it now.

http://i467.photobucket.com/albums/rr33/pedros20/011-3_zpsc6e6e367.jpg

http://i467.photobucket.com/albums/rr33/pedros20/012-3_zpsc9080a0f.jpg

http://i467.photobucket.com/albums/rr33/pedros20/013-3_zpsa3e4cfbe.jpg

[discothesnake]

Looks cracking Pete. When you getting to try it out?

[Pedros20]

That's the million dollar question Dave. Maybe Wednesday if work don't change my again.

See how we go Dave.

[discothesnake]

You doing the players or anything?

[Pedros20]

No not doing players, what about you? Are you coming down?
I know it's a long way for you.

[discothesnake]

Yeah Pete, a few of us are heading down. Really looking forward to it.

Worksop is not too bad. Just around 4 hours.

[PeterC]

Looks like I'm the first one to post up my build in RS config.

Pics were taken at night so i apologize for the bad shadows and lighting
http://farm9.staticflickr.com/8250/8559170602_fff89bb20f_b.jpg
http://farm9.staticflickr.com/8247/8559171068_3fc295c628_b.jpg
http://farm9.staticflickr.com/8512/8558066191_bc3b6f366a_b.jpg

[mekios]

Good job! :thumbsup:
I will post mine when i get a descent cam. It's also in rear motor but i mount the speedo on the small self on the tower.

[Craig W]

just found some bmax2 front and rear wheel if any1 looking for some drop me a msg b4 i put them on shop website

[cryer-evo]

here is mine

http://i1126.photobucket.com/albums/l620/cryer-evo/Facebook/Mobile%20Uploads/426448_10200450616480396_866627660_n.jpg

:thumbsup::thumbsup::thumbsup:

[jonathan may]

pic of mine


http://i297.photobucket.com/albums/mm222/ironhulk1979/IMAG0178.jpg

[sfry61]

Here's mine.

Just about got it how i want it.

http://i1159.photobucket.com/albums/p638/Steve_Fry33/SAM_0430_zpsb22cdaf3.jpg

[mihael]

is this car not out of balance with so much heavy wires on one side?

mihael

[cryer-evo]

Doesn't seem to affect it

[J'MM'N]

Run my wire directly over the battery strap, doesn't look any untidier and no problem getting battery packs in.

[J'MM'N]

B-Max2 now has matching B-Max4:thumbsup:

[smokes]

have you guys cut the rear body posts off the chassis?

[mikeyscott]

Looking v v nice.

I heard a rumour of a top F1 running yokomo this year.

[s22jgs]

have you guys cut the rear body posts off the chassis?

no, dont get in the way though once you get velcro on the sides

[xfactor]

No, none of us have cut the posts either, it pulls the body in for a perfect fit.

[Tom3012]

I cut mine off! :lol:

[cornishboy176]

Cut my posts off

[discothesnake]

Me too. No need for them.

[mekios]

No need for posts! Go full velcro. I even cut the post on top of the rear motor tower.

[RichyUK]

My B-Max2 MR.

All logo's are paint, cheers to Wayne @ AK Customz for cutting the masks for me :)

[mekios]

Me boy!

http://rcdevil.smugmug.com/2013/ELME-110-EP-Off-Road-14/i-JPrCrz6/0/O/IMG_1345.jpg

[M.Andrews]

Really like the look of the BMAX2:thumbsup:. Please can you tell me who sells the kit in the u.k and how much does it cost?.

[RudolfXC]

MB Models here:

http://www.rccarshop.co.uk/index.php/race-models/race-off-road-electric/yokomo/yokomo-b-max-2-mr-pre-order-deposit.html

[blue_pinky]

Here's mine for 2013!!!

http://www.worm-racing.co.uk/wp-content/uploads/BluePinky-Yokomo-cars-1.jpg

http://www.worm-racing.co.uk/wp-content/uploads/BluePinky-Yokomo-cars-2.jpg

http://www.worm-racing.co.uk/wp-content/uploads/BluePinky-Yokomo-cars-3.jpg

Cars from Team MB Models :thumbsup:
Paint courtesy of my bro :thumbsup:

[BeakaPete]

I recognise those ;) Looking good!

Fast work on the photos too. A shiny new fleet for the season.

[smokes]

here is mine with a rudebits lipo

[losichris]

Heres mine ready to go.
Thanks to Dave 'Maddy' Madsen for the paintjob :thumbsup:

http://www.oople.com/forums/picture.php?albumid=706&pictureid=6093

[mekios]

My new bodyshell by Area.51 (Greece). I'm gonna use it in Euros, in Spain.

https://dl.dropboxusercontent.com/u/43397636/975023_10201073849590626_1563709747_n.jpg

[Juicy74]

Me boy!

http://rcdevil.smugmug.com/2013/ELME-110-EP-Off-Road-14/i-JPrCrz6/0/O/IMG_1345.jpg

Ohhhh i hate you guys that run carpet. Your cars always look so clean and new. I'm so envious!!!!

[mekios]

You don't wanna see the above car right now... Lol! I raced in dirt and it's not so nice!
I don't complain though. I love dirt! These things are made for dirt and that's what they deserve!

[mes]

Has anyone tried if the Schumacher Cougar Bulldog body fits on the Yoke?

[mes]

Is there any B-Max2 owner with access to a Cougar body? :confused:
Could you check pleeeeease?!

[wouter.z]

Is there any B-Max2 owner with access to a Cougar body? :confused:
Could you check pleeeeease?!


Normal Cougar body or bulldog?? Next week at the belgium GP there will be some schumi drivers i think, so i could have a look if their body's fit.

[mes]

Thanks in advance! I'm mainly interested in the Bulldog, but the chassis footprint should be the same for both, right?
I'll be attending the combined NORC/West German regional meeting in Dortmund next week, maybe there'll be some Cougars, too. There were one or two in Langenfeld last week, but I did not have my car handy as I was only there as my son's mechanic. I'm looking forward to testing the Sweep Square Armors on dirt myself, they were brilliant on my son's B-Max4 in Duisburg! :thumbsup:

[Juicy74]

I'm looking forward to testing the Sweep Square Armors on dirt myself, they were brilliant on my son's B-Max4 in Duisburg! :thumbsup:

Ooohhh... those are great tires... I run them on my Bmax2MR and love em.

[Juicy74]

Hey Mes,
I have a cougar sv2 and tried the body on my bmax. Its not a perfect fit. The footprints are different, bmax being wider.

[mes]

Thanks for checking!

[AfroP]

heres mine

recently built not run yet and i still have to sort speedo wires etc.

went with plain white as even with masking tape my painting skills are seriously lame.

[paulj]

heres mine

recently built not run yet and i still have to sort speedo wires etc.

went with plain white as even with masking tape my painting skills are seriously lame.

Hi Paul,

looking nice and clean, I suppose you will need some name decals for that one then? Will you be at Batley next weekend? Come and find me and I'll sort you out, Jimmy has made me some new ones :thumbsup:

[Steven Forster]

Hi Paul,

looking nice and clean, I suppose you will need some name decals for that one then? Will you be at Batley next weekend? Come and find me and I'll sort you out, Jimmy has made me some new ones :thumbsup:

:woot: 2 for the price of 1 there like ;)

Im still tempted to get 1 of these specially with me not hearing anything back about the cubed yet :blush:

[dpackster1980]

Im still tempted to get 1 of these specially with me not hearing anything back about the cubed yet :blush:

Get one bought, well chuffed with mine.

[Steven Forster]

Get one bought, well chuffed with mine.

Could get both like and see which i like best.....;)

Get some pics up of yours ;)

[AfroP]

Its an awesome build. So easy everything fits together so well and theres nothing fiddley like circlips in the diff

[Dean Washington]

Here's mine from a few meeting ago, doesn't look quite as clean and new now :lol: , paint by tinlids :thumbsup:

http://i602.photobucket.com/albums/tt103/denzamo/0477a8a902baf999a15c39f6851595c0_zpse57e1356.jpg

[OneKiwi]

Heres mine

http://i30.photobucket.com/albums/c338/simonandhanna/IMG_20130729_125503.jpg

http://i30.photobucket.com/albums/c338/simonandhanna/IMG_20130729_125519.jpg

[PJC]

Is there enough space to put a Futaba Fasst R603FF/R603FS receiver in the B-Max 2 (mid configuration) with a std size servo and saddles?

[blue_pinky]

Is there enough space to put a Futaba Fasst R603FF/R603FS receiver in the B-Max 2 (mid configuration) with a std size servo and saddles?

Yes! Should go quite easily depending how big your esc is!

I have an LRP SXX, saddles and a full size servo in mine and that receiver fits in no problem. :thumbsup:

[PJC]

Thanks, I too have the LRP SXX.:)

[OneKiwi]

New paint for mine that I sprayed up today, Ill just put a few stickers on later

http://i30.photobucket.com/albums/c338/simonandhanna/IMG_20130823_162402.jpg

[dpackster1980]

Yes! Should go quite easily depending how big your esc is!

I have an LRP SXX, saddles and a full size servo in mine and that receiver fits in no problem. :thumbsup:

Exactly the same as I run and there's bags of room so you can make the wiring look neat.

[JustARcFan]

Here are mine :thumbsup::

I'm going to use the car with the plastic chassis for low grip and the other one with alu chassis for high grip.

Didn't had the chance to test them both but there is a BIG difference in flex between the 2.

[mes]

My new Finnisher on the MR in rear motor configuration:

[discothesnake]

Is that a new shell from Jconcepts? The old version wasn't a good fit on the MR.

[mes]

No, that's the old one. It isn't a perfect fit due to the wider chassis, but still ok when only attached with velcro.

[vandercarter]

No, that's the old one. It isn't a perfect fit due to the wider chassis, but still ok when only attached with velcro.

Can you put a pic of under the car?

Thanks.

[mes]

Unfortunately not at the moment, as it is already in mid-motor config for the indoor season. There's a little air between the shell and the chassis in the front, but not an excessive amount. I think it helps that I only use velcro and not the rear body post.

[OneKiwi]

I want this shell for the MR2

http://imageshack.us/a/img542/5285/achr.jpg

[vandercarter]

Unfortunately not at the moment, as it is already in mid-motor config for the indoor season. There's a little air between the shell and the chassis in the front, but not an excessive amount. I think it helps that I only use velcro and not the rear body post.

Ok, thanks for the tip

[Danosborne6661]

I want this shell for the MR2

http://imageshack.us/a/img542/5285/achr.jpg

www.phatbodies.co.uk :)

[discothesnake]

You reckon that'll be a straight fit?

Dave

[skyaflake]

In action at a race a couple of weeks ago.

http://teambb.rccss.nl/images/b-max2_grasbaan.jpg

[dikke hond]

That's an amazing car, skyaflake!!

[skyaflake]

Thanks :thumbsup:

[arransmith27]

4wd mini spikes on the front?

[skyaflake]

Yeah. It was a fun race so I took some old tires I had lying around. No particular reason actually.

Normally I use (cut) stagger. :thumbsup:

[mekios]

I see you did as i did, a hybrid bodyshell lol

[dikke hond]

Skyaflake is a badboy!:thumbsup:

[neiloliver]

Here is the shell that Jon @RCS painted for my Bmax 2MR

http://www.oople.com/forums/attachment.php?attachmentid=57984&d=1380026239

[discothesnake]

Oh that's nice!

[skyaflake]

Yeah! Nice colors.

[neiloliver]

This is the 3rd shell he has done for me in this style. The brief was a MARVEL comic style where the black lines are thick felt marker strokes and the colours are primary comic colours.

N

[PeterC]

Updated some parts to alloy versions and redid electronics layout a bit. i gotta install the rest of the parts later...

http://farm4.staticflickr.com/3725/10040754784_05df25f0f9_b.jpg

[mekios]

Judging by the tires you must be racing in a fancy clay awesome track somewhere! Please post some photos of the track!

[RLGfx]

Finally got mine finished!

All i need to do now is set up the shocks, they were just built with oils that i thought might be right, and the kit springs. Will get some Losi oils then re-do them with associated springs :D

[skyaflake]

What brand is the white wire? Looking great ! ;)

[mes]

Tekin has some white 12 AWG wire (TT3014).

[RLGfx]

its from j Perkins, comes as a pack of red white and black 1m of each.

[JustARcFan]

Here is mine, finally with all the bling installed :thumbsup:

[mes]

:drool:
I am beginning to regret I gave my MR to my son for the coming season... Well, at least I still get to work on the car...:lol:

[skyaflake]

nice paintjob :thumbsup:

[Premier-Nick]

My BMAX2

[discothesnake]

My B-max2 with new colours

[dancr125]

Here's mine when it was new

[dancr125]

Here's mine when it was new don't y it won't allow me to upload more than 1 pic at a time

[discothesnake]

don't y it won't allow me to upload more than 1 pic at a time

Doing it from an ipad by chance??

Mine is the same.

[dancr125]

Doing it from an ipad by chance??

Mine is the same. yes from an iPad .

[janus_77]

https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/1385863_401152086680482_1841731663_n.jpg

[skyaflake]

Nice! :thumbsup: The same old paintscheme ;)

No more X6?

[JustARcFan]

Aha!

Eindelijk bye bye X6 :woot:
https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/1385863_401152086680482_1841731663_n.jpg

[mikeyscott]

Rear ARB, is there a part number?

[skyaflake]

Not from Yokomo, yet.

[neallewis]

Rear ARB, is there a part number?

The AE one fits perfect: http://www.rccarshop.co.uk/index.php/spares/team-associated/b4-1/b4-rear-anti-roll-bar-3-bars.html
Never had the need to use it though.

[Jabber]

Yes direct fit as Neil says and indoors it stops the rear collapsing. Ran the car last year with and without it and just kept the car more stable through fast sweepers.

[J'MM'N]

B-Max4 fits also

http://www.rccarshop.co.uk/index.php/spares/yokomo/b-max4/bm-412-stabilizer-set.html

[neallewis]

Yes direct fit as Neil says and indoors it stops the rear collapsing. Ran the car last year with and without it and just kept the car more stable through fast sweepers.

Jabber, does it remove any rear grip?

[janus_77]

https://scontent-a-ams.xx.fbcdn.net/hphotos-frc3/1385863_401152086680482_1841731663_n.jpg

Yep the X6bc is on the shelf ;)

This rear ARB I made myself using the AE hardware I had left from the X6 and used 1.2 springsteel. This you can get at most local hobbyshops.

Wanted to try one since on the X6 I never took the ARB off. Asto, dirt or clay didn't matter, it was just on there

But I will give the B-max4 kit a look, Thanks :thumbsup:

[crashingbird]

Looks great, but a little pale though... at least the wheels compensate for that :)

I hope there's enough horsepower onboard !?! :woot:

[sfry61]

http://i1159.photobucket.com/albums/p638/Steve_Fry33/SAM_1426_zps615fe45c.jpg (http://s1159.photobucket.com/user/Steve_Fry33/media/SAM_1426_zps615fe45c.jpg.html)


Mine now i've got all the shinny parts i want :thumbsup:

[mes]

No aluminum shock caps? They're brilliant! :thumbsup:

[neallewis]

No aluminum shock caps? They're brilliant! :thumbsup:

Missing ali rear hubs too ;-)

[sfry61]

Missing ali rear hubs too ;-)


Totally forgot to get some rear hubs!

I'll have to sneakily buy some without the woman notcing :lol:

[mes]

Oh, in the case of blingy parts, my wife is quite tolerant. Not too long ago, I showed her some Yaiba red aluminum parts I had considered for my SC10, and she liked them despite the overall price tag! When it comes to buying tyres, that's a different story, though... :lol:

[skyaflake]

My girlfriend doesn't even want to know a thing about the prices :wub

I don't want to know about her shopping either. Luckily I often don't buy stuff I don't need. :lol:

[mihael]

hi there

this is my bmax 2mr V2 with the full tunign kit. i dont know why i bought all this tuning. i think stock is good enough.

i switch form ae b4.2 and dex210. hope this car drives better then i do :-)

[neallewis]

hi there

this is my bmax 2mr V2 with the full tunign kit. i dont know why i bought all this tuning. i think stock is good enough.

i switch form ae b4.2 and dex210. hope this car drives better then i do :-)

Looking good. Much like mine;-) I've done the same and shown the car some love with all the bling. Not actually run the ali chassis as yet though, wanted to swap it mid meeting to see the difference.

[skyaflake]

Nice ride ! :thumbsup:

[JustARcFan]

Added a bit of bling :D

[Tom3012]

That looks stunning :drool:

[Martin Wallace]

Yeah thats a great example, very nice paint job.:thumbsup:

[janus_77]

Added a bit of bling :D

Your right front shock screw is not fully tightened ;)

[JustARcFan]

I think it's the picture because it's fully tightened :woot: :)

[PeterC]

Had nothing to do today, so I cleaned up my wiring. ;)

Electronics
Reedy Sonic 17.5T
Orion R10 Pro
Sanwa 471 Receiver
Sanwa SDX-801 Low Profile Servo


http://farm6.staticflickr.com/5542/10638232174_84698a8dcd_b.jpg

Close Up

http://farm4.staticflickr.com/3749/10638227615_ef0b06397a_b.jpg

[Lycan]

http://www.rcpics.co.nz/andrew/b-max2.jpg
My first Yokomo :)

[mes]

Very nice! :)

[neallewis]

Nice shell, Lycan, who did that?

[Wacker 3]

Hi all, I know it's a bit off topic but where do you get the carbon effect weights from

[mekios]

I have seen them in Race n Drift Japan. Never bought them though.
http://www.rc-race-and-drift-japan.com/index.php?main_page=product_info&cPath=9&products_id=2994

[Lycan]

Nice shell, Lycan, who did that?

Cheers :) Painted that one myself :)

[mihael]

hi there

here are my yokomos
the hobbyking lipos fits perfect

this car needs very much wires :-)

[skyaflake]

Sweet rides! :D

[PeterC]

Hi all, I know it's a bit off topic but where do you get the carbon effect weights from

its from 3Racing...

http://os.3racing.hk/products_list.php?stype=ctp&catalog_key=91

[Garry Spice]

6087960823
mine from yesterday at maritime racing!

[skyaflake]

My car from last race:

https://scontent-b-ams.xx.fbcdn.net/hphotos-prn2/960216_128624073974512_675729779_n.jpg

[discothesnake]

62231
Here's my spare B-max2 built with carbon fibre chassis and new Azarashi shell.

Don't know why it's uploaded upside down. Joy of iPads

[neallewis]

Don't know why it's uploaded upside down. Joy of iPads

You held it upside down when taking the sort, and the rotation value in the EXIF metadata has been stripped out either by the ipad/ipad software itself, or by the web site/service you have used to host it.

[discothesnake]

Absolutly no idea what you're on about Neal but thanks all the same!

[neallewis]

Absolutly no idea what you're on about Neal but thanks all the same!

Sorry :-)
When you take a digital picture, the camera writes the orientation of the device into the photo file. This orientation value is read by software or web browsers to correctly display the image the right way up.
The ipad or software you have used on the ipad, or the website you have used to upload the file to, has stripped out this info, so the photo is shown in the orientation that you held the ipad when you took it, which was upside down ;-)

[discothesnake]

Yeah you're correct, I did have it upside down so I could get the lens close to the ground. I'll try it again tonight.

[AJ Roberts]

http://i801.photobucket.com/albums/yy298/andrewjroberts/20140118_135553_zpsjg4xvb2c.jpg (http://s801.photobucket.com/user/andrewjroberts/media/20140118_135553_zpsjg4xvb2c.jpg.html)

Shame I cut the rear of the shell wrong :cry:

[dancr125]

http://i801.photobucket.com/albums/yy298/andrewjroberts/20140118_135553_zpsjg4xvb2c.jpg (http://s801.photobucket.com/user/andrewjroberts/media/20140118_135553_zpsjg4xvb2c.jpg.html)

Shame I cut the rear of the shell wrong :cry:

Perfect fit for rm! ;)

[AJ Roberts]

Perfect fit for rm! ;)

Haha!

Looks better from this angle

http://i801.photobucket.com/albums/yy298/andrewjroberts/20140118_180534_zpsvr30qmgf.jpg (http://s801.photobucket.com/user/andrewjroberts/media/20140118_180534_zpsvr30qmgf.jpg.html)

:lol:

[MHeadling]

http://i783.photobucket.com/albums/yy114/headling/32D78003-99B5-4ACC-96D9-0B0AE27B07CA.jpg (http://s783.photobucket.com/user/headling/media/32D78003-99B5-4ACC-96D9-0B0AE27B07CA.jpg.html)

[AJ Roberts]

Got some electrics in mine now

http://i801.photobucket.com/albums/yy298/andrewjroberts/20140129_194457_zpsjouvxazs.jpg (http://s801.photobucket.com/user/andrewjroberts/media/20140129_194457_zpsjouvxazs.jpg.html)

:D

[MHeadling]

My V2 Factory:

http://i783.photobucket.com/albums/yy114/headling/CAE46A21-2DB8-4F74-A7AF-26A01A57F802.jpg (http://s783.photobucket.com/user/headling/media/CAE46A21-2DB8-4F74-A7AF-26A01A57F802.jpg.html)

http://i783.photobucket.com/albums/yy114/headling/A3657880-319A-4C2B-B8BB-6DEE05E1B77E.jpg (http://s783.photobucket.com/user/headling/media/A3657880-319A-4C2B-B8BB-6DEE05E1B77E.jpg.html)

Thanks to Custom Blitz for the paint

[skyaflake]

http://teamyokomo.nl/images/BMAX2_MIO.png

This was last weekend.

[skyaflake]

And another one.

http://teamyokomo.nl/images/BMAX2_MIO_STOP.png

[skyaflake]

https://scontent-a-ams.xx.fbcdn.net/hphotos-prn2/t1.0-9/10153681_831306486897236_2881845087424942566_n.jpg

Azarashi isn't that bad. :thumbsup:

[Paultje040]

My new ride!

Just in some need of Team BadBoy stickers.

Special thanks to rccss.nl for the great en superfast service!


http://i275.photobucket.com/albums/jj298/Polleke-MF/Yokomo/CF5718AC-5694-4BEF-8297-AA7BA2A69FC5.jpg
http://i275.photobucket.com/albums/jj298/Polleke-MF/Yokomo/A537528F-4C59-41F6-8259-88EE2BB78542.jpg
http://i275.photobucket.com/albums/jj298/Polleke-MF/Yokomo/FC205229-626C-4D5B-BB0D-B8D436F12962.jpg

[skyaflake]

I like the apple candy red.:)

[Danosborne6661]

MINE, but it's for sale in the for sale section :(

http://i.imgur.com/r2Lvxdu.jpg

[MOmo]

So I picked this up from a recent swap meet. Killer deal. A few spares. It came with the white stock body which I dressed up with a couple of sponsors.

Then I got to looking at an old rc10 and comparing lines. We to work with a pair of lexan scissors and the result is what you see here.


*Thanks to a Not-So-SMARTPHONE, my pics failed to upload.*

I'll try and get it posted.


Has anyone had trouble with fitment of the JCO Finnisher body? Mine seems to flair the body a bit where it mounts to the side. In comparison, my B4.2 Finnisher fits like a glove....


MOmo

[Ashlandchris]

So I picked this up from a recent swap meet. Killer deal. A few spares. It came with the white stock body which I dressed up with a couple of sponsors.

Then I got to looking at an old rc10 and comparing lines. We to work with a pair of lexan scissors and the result is what you see here.

Not sure your picture attachment worked...

[discothesnake]

Has anyone had trouble with fitment of the JCO Finnisher body? Mine seems to flair the body a bit where it mounts to the side. In comparison, my B4.2 Finnisher fits like a glove....

The Finnisher shell is made for the original rear motor B-max2 and it's not a great fit.

Hopefully Proline will do a nice one soon.

[MOmo]

Thanks.

Try this again. Old dog. New tricks.


Momo

[subucultcha]

New body on the way.....:)

[mes]

Thanks.

Try this again. Old dog. New tricks.


Momo

Very cool! :thumbsup:

[subucultcha]

Ready to rumble...:thumbsup:

[Wacker 3]

Here is mine

[jokersat]

Ready to rumble...:thumbsup:
:D:D:D:thumbsup::thumbsup:

[Simmi]

I own a BMax2 MR Vers3

A new member in Buggy and I won the B Main :D
I love this car very stable on track and it flys like a bird.

Why a YZ2 :p

[rcpower]

I own a BMax2 MR Vers3

A new member in Buggy and I won the B Main :D
I love this car very stable on track and it flys like a bird.

Why a YZ2 :p

In order of importancy: because the YZ-2
steers better,
jumps better
looks better.

[dikke hond]

Nope, Bmax looks better :thumbsup:

[kitesurfer73]

Simmi what shocks and springs you running?
Like you bmax I've had my 2 months great car..

[Simmi]

Hi, I use Yatabe springs and the MR Shocks with Alu caps.

About steering: I have a lot steering, drive corners very closely
Looking: The BMax2 looks better than the YZ2 :thumbsup:
Jumps: flies straight, wide and ends up without break

:D

[Ashlandchris]

Nope, Bmax looks better :thumbsup:

I have to agree. I love my YZ2, but my BMax2 is better looking.

But it is still no Optima :-)

[5tone]

http://img15.hostingpics.net/pics/59313620150112145258.jpg

[skyaflake]

Nice paint on that Erithus. :D

[Scott_83]

Do people still use these.

Are they still competitive?

[dikke hond]

Yuuup, I used the Bmax2 last weekend on a carpet indoor race. 5/6 heats I used the yz2 but it's to aggressive for me. The last heat I tried the bmax and I love it. Very forgiving and easy to drive.

[Scott_83]

Are they easy to set up. What are they liked outside are spares still readily available

[dikke hond]

Parts are no problem. You can also use arms from the Bmax4 etc. Plus the car is bulletproof!
Car is easy to setup because it's more forgiving then a yz2 imo. I still think the yz2 will be faster on high grip but the Bmax2 is the best allround car.

[skyaflake]

That's why you are b-max boy :thumbsup: :p

[Scott_83]

What's a average price for 2nd hand one of them

[skyaflake]

I guess around 150 euro for a good car.

[dikke hond]

BMAX ftw! :p

[mes]

If anyone of you is in the market for another Max (https://store.rccss.nl/shop/cars/offroad/yokomo-b-max2-mr-ver-2-factory-kit/), Yokomo NL are clearing their stocks.