mark79
03-03-2013, 07:39 PM
I'm selling my RC8.2 roller.
Its complete to the standard kit spec, has been run on dirt and astro and has had a recent rebuild with plastics being replaced and a full bearing replacement.
I've also added the following parts to the buggy to improve handling (£250 worth):
Centro C & D plate for low roll centre (15 tanks old).
Full alloy vertical caster black kit on steering (15 tanks old).
Ghea centre driveshaft couplings. Rubber boot on rear and full alu with sleeves (5 tanks old).
Bitty Design shell. New, 1 run old and in perfect condition.
Mugen wing (as shell).
Ghea shock caps, delrin inserts and Kyosho bladders (5 tanks old).
Custom GT10 rear receiver box mod.
'Zero hole' drilled rear shock tower.
3 hole rear plastic hubs.
Higher RC8 wing mount.
Also included are spare arms, rod ends, new plastics including diff cases, new shock parts, chassis braces, 3 hole hubs, steering parts, old caster black hardware, clutch kits, 16 & 17t clutch bells, bearings, diff parts, screws, shock boots, 2 motor mount kits, anti roll bars, blue and silver full spring sets, front and rear alu shock towers cva rebuild kits, spare axles and cva joint (steel), brand new RC8 alu steering ackerman link, Jconcepts wing, RC8 wing, 8.2 wing mount etc. Buggy comes with trimmed yellow minispikes pre mounted Schumacher wheel set.
A fair number of the spares are still in their packaging.
Because of the amount of spares and the upgrades are all pretty new and in good condition I'm after £350 or nearest offer (buyer pays fees)
I would consider a swap for a decent spec Associated B44.2 or DEX410V3 with spares etc.
http://i1325.photobucket.com/albums/u637/markh7991/photo-2_zps13918faf.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photo-1copy_zps0e142dac.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photo-3_zps61ffab8a.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photocopy3_zps31fa9d7d.jpg
Its complete to the standard kit spec, has been run on dirt and astro and has had a recent rebuild with plastics being replaced and a full bearing replacement.
I've also added the following parts to the buggy to improve handling (£250 worth):
Centro C & D plate for low roll centre (15 tanks old).
Full alloy vertical caster black kit on steering (15 tanks old).
Ghea centre driveshaft couplings. Rubber boot on rear and full alu with sleeves (5 tanks old).
Bitty Design shell. New, 1 run old and in perfect condition.
Mugen wing (as shell).
Ghea shock caps, delrin inserts and Kyosho bladders (5 tanks old).
Custom GT10 rear receiver box mod.
'Zero hole' drilled rear shock tower.
3 hole rear plastic hubs.
Higher RC8 wing mount.
Also included are spare arms, rod ends, new plastics including diff cases, new shock parts, chassis braces, 3 hole hubs, steering parts, old caster black hardware, clutch kits, 16 & 17t clutch bells, bearings, diff parts, screws, shock boots, 2 motor mount kits, anti roll bars, blue and silver full spring sets, front and rear alu shock towers cva rebuild kits, spare axles and cva joint (steel), brand new RC8 alu steering ackerman link, Jconcepts wing, RC8 wing, 8.2 wing mount etc. Buggy comes with trimmed yellow minispikes pre mounted Schumacher wheel set.
A fair number of the spares are still in their packaging.
Because of the amount of spares and the upgrades are all pretty new and in good condition I'm after £350 or nearest offer (buyer pays fees)
I would consider a swap for a decent spec Associated B44.2 or DEX410V3 with spares etc.
http://i1325.photobucket.com/albums/u637/markh7991/photo-2_zps13918faf.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photo-1copy_zps0e142dac.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photo-3_zps61ffab8a.jpg
http://i1325.photobucket.com/albums/u637/markh7991/photocopy3_zps31fa9d7d.jpg