sosidge
08-04-2013, 09:22 PM
Gone through some old stuff.
Futaba 3VC 40MHZ (Spares/repair)
Poor range. I'm 99% sure it is the module as I briefly tested it with a Spektrum module and the range was fine but cannot guarantee this. Case back is broken and held together with tape. Otherwise all menus, sticks and switches are in full working order. Manual, mains charger and NiMH battery included. UK supplied when new. £50 posted in UK
Futaba R133F 40MHz FM receivers (x2)
Both in full working order when last used. Both have replacement antennas. One has some waterproofing-goo marks on the case. £15 each posted in UK each
Futaba R113iP 40MHz FM PCM receiver
In full working order when last used. £15 posted in UK
Futaba 40MHz FM crystals
4 pairs. All working when last used. 665/865/905/915. £10 posted in UK for the lot
Futaba R604FS-E 2.4GHz reciever
Bought in error, not compatible with 3-channel Futaba 2.4 radios. Compatible with 4PK. Special electric car version with no external antenna. Brand new, only taken out of the packaging, never installed. £40 posted worldwide
Futaba radio spares
To suit 3VC and maybe others. Brand new in packs. 1x battery cover and 2x switch nuts. £10 posted in UK
0.6mod Pinions
RW racing pinions to suit Tamiya and others, all brand new in pack. I have 1x 16T, 2x 17T, 1x 19T, 2x 21T, 2x 23T, 1x 24T, 1x 25T, 1x 26T, 1x 27T, 2x 28T. £2.50 each, postage £1.50 per batch or combine with something else.
Speed Passion Reventon Stock Club Race.
Spares/Repair. Powers up and lights respond but won't drive the motor. £15 posted
Brushed motors
4 of them. Much More Eavan 19T, Integy Blue Atlas 19T, Orion Revolution 12x1 HT, Yokomo S-World 9x2. Also Orion Revolution V2 endbell conversion (missing a set of brushes). All working but not race tested. £15 posted the lot.
Comm lathe
3Racing lathe with BB blocks, carbide bit and 27T drive motor. SOlid bit of kit. £50 posted
Robitronic Discharge tray
Equaliser for NiMH cells. £7 posted
PM if interested. Sorry there are no pics attached but oople is really slow and temperamental for me at the moment.
Futaba 3VC 40MHZ (Spares/repair)
Poor range. I'm 99% sure it is the module as I briefly tested it with a Spektrum module and the range was fine but cannot guarantee this. Case back is broken and held together with tape. Otherwise all menus, sticks and switches are in full working order. Manual, mains charger and NiMH battery included. UK supplied when new. £50 posted in UK
Futaba R133F 40MHz FM receivers (x2)
Both in full working order when last used. Both have replacement antennas. One has some waterproofing-goo marks on the case. £15 each posted in UK each
Futaba R113iP 40MHz FM PCM receiver
In full working order when last used. £15 posted in UK
Futaba 40MHz FM crystals
4 pairs. All working when last used. 665/865/905/915. £10 posted in UK for the lot
Futaba R604FS-E 2.4GHz reciever
Bought in error, not compatible with 3-channel Futaba 2.4 radios. Compatible with 4PK. Special electric car version with no external antenna. Brand new, only taken out of the packaging, never installed. £40 posted worldwide
Futaba radio spares
To suit 3VC and maybe others. Brand new in packs. 1x battery cover and 2x switch nuts. £10 posted in UK
0.6mod Pinions
RW racing pinions to suit Tamiya and others, all brand new in pack. I have 1x 16T, 2x 17T, 1x 19T, 2x 21T, 2x 23T, 1x 24T, 1x 25T, 1x 26T, 1x 27T, 2x 28T. £2.50 each, postage £1.50 per batch or combine with something else.
Speed Passion Reventon Stock Club Race.
Spares/Repair. Powers up and lights respond but won't drive the motor. £15 posted
Brushed motors
4 of them. Much More Eavan 19T, Integy Blue Atlas 19T, Orion Revolution 12x1 HT, Yokomo S-World 9x2. Also Orion Revolution V2 endbell conversion (missing a set of brushes). All working but not race tested. £15 posted the lot.
Comm lathe
3Racing lathe with BB blocks, carbide bit and 27T drive motor. SOlid bit of kit. £50 posted
Robitronic Discharge tray
Equaliser for NiMH cells. £7 posted
PM if interested. Sorry there are no pics attached but oople is really slow and temperamental for me at the moment.