gazhillAE
06-05-2013, 10:17 PM
Team Associated C4.1
Built from a brand new B4.2 kit and centro kit
http://www.petitrc.com/setup/associated/setupc4.1/C4.1_GarethHill_Southport20130331/
4 meetings old only
Fully powder coated in mattblack!
Rudebits 8mm carbon chassis
Rudebits brass weights x3
Avid Matt black alloy steering rack
Budsball diff balls and thrust balls
Associated 12mm big bores
Associated brass posts x3
Associated carbon x brace
Associated carbon lipo trays
Associated black motor plate
Associated black gear cover
Associated carbon front tower
Associated carbon front arms
Associated b44 rear arms
Associated carbon top plate
Associated 0deg rear hubs
Associated polisheddriveshafts
Associated chassis protector
Associated VTS slipper kit
Jconcepts alloy hex kit x4
Ghea Delrin front bulkhd/brace
Tony parr thicker rear tower
Tony part lowered wingmounts
Jconcepts white ball cups
Whitey o rings
Cream toe in blocks x2
Proline bulldog 2012 shell pro painted
Associated c4.1 shell pro painted
Rudebits R1 wing
Custom foam spacer for shorty
Standard rear tower with new wing and higher wing mounts already to fit
This cost me over £800 to build to this spec! Work it all out for yourself ;0)
Immaculate condition!
£300 recorded delivery
Built from a brand new B4.2 kit and centro kit
http://www.petitrc.com/setup/associated/setupc4.1/C4.1_GarethHill_Southport20130331/
4 meetings old only
Fully powder coated in mattblack!
Rudebits 8mm carbon chassis
Rudebits brass weights x3
Avid Matt black alloy steering rack
Budsball diff balls and thrust balls
Associated 12mm big bores
Associated brass posts x3
Associated carbon x brace
Associated carbon lipo trays
Associated black motor plate
Associated black gear cover
Associated carbon front tower
Associated carbon front arms
Associated b44 rear arms
Associated carbon top plate
Associated 0deg rear hubs
Associated polisheddriveshafts
Associated chassis protector
Associated VTS slipper kit
Jconcepts alloy hex kit x4
Ghea Delrin front bulkhd/brace
Tony parr thicker rear tower
Tony part lowered wingmounts
Jconcepts white ball cups
Whitey o rings
Cream toe in blocks x2
Proline bulldog 2012 shell pro painted
Associated c4.1 shell pro painted
Rudebits R1 wing
Custom foam spacer for shorty
Standard rear tower with new wing and higher wing mounts already to fit
This cost me over £800 to build to this spec! Work it all out for yourself ;0)
Immaculate condition!
£300 recorded delivery