Hong Nor X1-CR Pro FT UK - BB Shocks etc

[Logie]

Hey all, going to focus on racing the Truggy so instead of leaving the Buggy to waste, i can sell it and get some spares and tools in!

Here are the details:

This edition of the X1-CR buggy now includes the brand new 16mm Big Bore shocks! The kit retains all the great options included but with the addition of Hong Nor's new huge big bores.


The following Special Edition upgrades are now included with this kit:

• X1S-50 Alloy Steering Top Plate
• X1S-52 Alloy Centre Diff Mount
• 380Y High Downforce Wing
• 373 Fuel Tank Puller
• X1-41 New Style Radio Box
In addition to the Special Edition upgrades, this kit also includes the upgrades as included with the Factory Team kit:
• Big Bore Shocks for improved dampening and less friction on bumpy tracks.
• 5mm CNC Shock Towers with more adjustment options and improved impact resistance.
• Threaded Captured Hingepins which eliminate E-Clips aswell as improve strength.
• Fiberglass Brake Disks that offer fuel/oil resistance and less fade from heat.
• Lower Front Alloy Suspension Mount. The alloy mount improves strength over the plastic part in the case of a frontal impact.
The X1-CR also has a huge range of high quality, top spec parts in addition to the FT and SE upgrades such as the 7075 machined chassis, universal joints, carbon fibre radio tray and more!

Spares:

Spur Gear
Radio box + lids
Chassis
Front arms
Toe rods and arms
Rear spoiler mount
2 boxes of bits including the setup blocks, shock spares and others
JE Spares screw kit (some used)
4 shells
3 or 4 spoilers
4 sets of tyres, 1 set im not sure what there for and worn tie blocks

Also included is the Radio equip and servos which are Sanwa Gemini II, Sanwa reciver 40.725 crystals, Cirrus 14KG servo, Ace 2008 (stock ST-1 servo) which is 9KG.


JP-1 Exhaust, engine mounts are included but no engine. x2 2400 Receiver packs.


All thats needed is an engine to get rolling.


Car has been used for 2 races, and around 2-3 hours of practice, bottom of the chassis is marked but nothing is bent, its straight. No worries as said above, theres a new chassis included!


Looking for around £220 posted - PM me here or contact me on MSN Logie-swcc@hotmail.co.uk (Logie-swcc@hotmail.co.uk) (Also my email)

http://i7.photobucket.com/albums/y288/LogieUK/X1CR1.jpg

http://i7.photobucket.com/albums/y288/LogieUK/X1CR2.jpg

http://i7.photobucket.com/albums/y288/LogieUK/X1CR3.jpg

http://i7.photobucket.com/albums/y288/LogieUK/x1cr4.jpg

http://i7.photobucket.com/albums/y288/LogieUK/wings.jpg

http://i7.photobucket.com/albums/y288/LogieUK/shells1.jpg

http://i7.photobucket.com/albums/y288/LogieUK/misc1.jpg

http://i7.photobucket.com/albums/y288/LogieUK/x1crspares.jpg

http://i7.photobucket.com/albums/y288/LogieUK/tyres1.jpg

http://i7.photobucket.com/albums/y288/LogieUK/tyres2.jpg

http://i7.photobucket.com/albums/y288/LogieUK/tyres3.jpg

[Logie]

All tyres have been sold so im happy to sell the shells or the wings (excluding the pink one which i like ;) )

Sanwa Gemini II TX + RX with .725 crystals £35 posted

JP-1 Chrome which is hardly used despite looking like its donkeys years old! £10 posted?

Shells are £6 each Wings £5 Each

X1-CR Pro FT roller £140 (This included the boxes of bits and screw kit)

Spares package which includes: £28
Spur gear
Radio box + lids
Chassis
Front arms
Toe rods and arms
Rear spoiler mount


All prices INCLUDE postage - PM me offers but they will have to be close to my asking prices :)