Miggers
29-05-2013, 10:42 AM
Bit of a daft question really(I used to race 4WD BITD),I'm playing with
a 2WD to get back into the swing a bit and have found a nice dirt/hard pack/dusty
with a few decent jumps and corners spot to give it some stick.
What would folks recommend for that surface and running:
Mad Rat gearbox(fully ballraced)
Standard Ansmann spur/slipper
17x2 brushed
Mtroniks 10turn limit ESC
1900 Scr Ni-Cads(told you I was old Skool)
I have been using the stock Ansmann 21t pinion,but was wondering if it'd
do better with another spur/pinion combo.
a 2WD to get back into the swing a bit and have found a nice dirt/hard pack/dusty
with a few decent jumps and corners spot to give it some stick.
What would folks recommend for that surface and running:
Mad Rat gearbox(fully ballraced)
Standard Ansmann spur/slipper
17x2 brushed
Mtroniks 10turn limit ESC
1900 Scr Ni-Cads(told you I was old Skool)
I have been using the stock Ansmann 21t pinion,but was wondering if it'd
do better with another spur/pinion combo.