View Full Version : Battery amp charge
Chop chop
01-06-2013, 10:34 AM
Hi guys, just got a charger and battery and looking for advice.
Charger - core uac 50 charger
Battery - gens ace saddle pack....4800 mah 1s3p 3.7v each
I have linked he saddle pack in series with the wire but what amp rate do I charge at for the fsaddle pack?
I am guessing I charge at 4.8 amps but would appreciate help :confused:
Getpip
01-06-2013, 10:46 AM
Correct :thumbsup:
Chop chop
01-06-2013, 06:07 PM
Have charged saddle pack battery but when connecting to car, I get a constant orange and flashing red light on the speed passion esc which looking at the manual shows low voltage and overheating. Any ideas what might be causing it.
Have a durango 210 rtr. Did work fine, I have changed engine to mid motor and connected to gens ace battery and now keep getting this light.
Help .....
Nigel
01-06-2013, 09:27 PM
What speed passion ESC are you using?
Once the Lipos are fully charged what is the voltage per cell when tested with a multimeter or voltage tester?
Chop chop
02-06-2013, 09:10 AM
Hi
Speed passion Citrix stock club race which come with the rtr kit. Not sure about battery as I only have a charger. First time battery has been used and charged
RudolfXC
02-06-2013, 09:52 AM
Some ESC/Motor combinations do not work very well so try another motor if possible.
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.