Fitting a Savox 1251 in a 210

[MrSlow]

Hi

Just got a low profile 1251 for my 210, but I can't get it to fit due to where the wires come out of the casing.
Am I doing something wrong or do I need a different servo?

Thanks

[mattr]

More jiggling needed, all servos are a bit tight due to the shape of the chassis side rails.

If you are worried about bending the servo wire, try relieving the rail there, 2 minutes with a dremel should do it......

[ridgeracer]

You should use a servo saver with the 1251 servo or you will need to replace gears often..

[MrSlow]

Thanks for the advice guys.

[steve73]

Hope you have no Tekin ESC, is not working with Savox

[Tony Long]

You might also need a glichbuster capacitor as well because savox servos can draw to much current from your ESC