Spur gear advice

[Team 36]

Hi I have dex 210 with 85t spur gear but I want more speed do i add more teeth or less teeth as I'm new new r/c racing I would like some advice thanks a lot !!!:thumbsup:

[ian h]

Less on spur or more on pinion.

[Lee1972]

When you're saying speed if you mean top end then yes bigger pinion and or smaller spur, if you're after more acceleration the reduce the size of your pinion.

[Jason A]

Hi,

I have added a link for you to a Dex210 gear ratio chart

Team Durango Gear Ratio Chart (http://www.petitrc.com/setup/durango/setupdex210/DEX210_GearChart.pdf)

Like already suggested if you are looking for top speed you would generally go for a larger pinion or if you are wanting more bottom end then you might go for a smaller pinion.

Always check when changing pinions that your motor is not getting to hot after your run :-)

I currently run a 8.5t motor with a 25 pinion on 87 spur

[danDanEFC]

I run a 7.5t motor on a large astro track with a 24T pinion I have a 81T spur.

[Team 36]

Thanks for the advice I have a 6.5t motor I have 83t spur & 20 pinion but just need a bit more speed!!