View Full Version : turnigy 9x abouts to order along with kk2 is this correct also buddycodes or referals

24-07-2013, 06:08 PM
Hey guys.

Hobby king are showing stock of the kk2 and 9x and I remember people wanting buddy codes ect as it works both in our favour.

Kk2 is around 20 and the 9x is only 35 with 2.4g rx. Is this the right one.

This one.
http://www.hobbyking.co.uk/hobbyking/store/__8992__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Re ceiver_Mode_2_v2_Firmware_.html?strSearch=turnigy% 209x

Im abouts to order as they quickly go out of stock I believe.



24-07-2013, 06:14 PM
Please excuse the typos im on the phone whilst in work ha ha.

Just to let you know that iv followed your advice religiously and will probably order in bits n bats everything apart from the frame from uk hobby king.

Im probably going to order either the dji 330 or 450 when iv got the bulk of everything else needed so can share the commission or whatever they offer for recommendations.

If anyone wants to put up roughly what accessories, motors ,Props, speedos I need I can add them to my wish list and order.

Thanks again.


24-07-2013, 10:21 PM
hmmm interesting. And not in a good way!
Seems the new look hobbyking website has removed all my buddycodes...

That 9x is fine. I think it's the one that I saw James running tonight, and he certainly had no problems with range (or anything else)
It isn't the one that I use though... That's this one: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=20976
In hindsight I should have got the one you've posted, but I went with the FrSky telemetry module and receiver. Which I don't use telemetry on...
This is the one: http://www.hobbyking.com/hobbyking/store/__14355__FrSky_DF_2_4Ghz_Combo_Pack_for_JR_w_Modul e_RX.html