tyreman
31-07-2013, 05:11 PM
I have my Cougar SVR that has done 3 meetings
Comes with Carbon Fiber option Chassis, a new clear shell, LMR wing, Core progressive springs,
Proline Holeshot 2 raer tyres and Proline 8175 ribs.
£100
http://i685.photobucket.com/albums/vv211/brianpreddy/null-9.jpg
http://i685.photobucket.com/albums/vv211/brianpreddy/null-5.jpg
Reventon Pro Speedo in Gun metal grey £60ono
http://i685.photobucket.com/albums/vv211/brianpreddy/null-6.jpg
Speed Passion 7.5V3 motor was new for the Euros this year has done 10 x 5 minute runs. £30
http://i685.photobucket.com/albums/vv211/brianpreddy/null-4.jpg
GM HSB 860 BB MG servo £30 (retails for £70)
High-voltage, operating voltage up to 8.4V!
Direct operation with 2-cell LiPo battery packs
Operating voltage range 4.8 ... 8.4 V
Brushless
2 x ball bearings
Metal drive mechanism
Info
High-Voltage Brushless Servo (HBS) HBS (high-voltage brushless servo) combines the performance of brushless technology with all the advantages of the high-voltage servo. In addition to the unparalleled acceleration, greater efficiency, and no wear of carbon brushes, these servos can be supplied with an operating voltage of 8.4V. Direct connection of 2-cell LiPo battery packs is now possiblewith no problem; in addition, these servos also provide top performance at an operating voltage of just 6V. Precision manufacturing and assembly and top component quality provide the servo drive system with uncompromising power and speed. A new dimension in the combination of power, speed, acceleration, precision, and resolution.
Specification
Holding torque 6.0V, approx.: 255 N/cm
Transit speed at 6.0 V, approx. : 0,11 Sek/40°
All-up weight, approx.: 68 g
Angular travel incl. trim, approx. : 2 x 45 °
Transit speed at 7.4V, approx. : 0,09 Sek/40°
No-load current drain, approx. : 46 mA
Torque at 6.0V, approx.: 132 N/cm
Holding torque 7.4V, approx.: 289 N/cm
Charging rate at 6.0V approx.: 2350 mA
Dimensions (LxWxH): 40 x 20 x 40 mm
Torque at 7.4V, approx. : 150 N/cm
Bearings: Lager bb2x
Replacement gearbox: 7990.2
Charging rate of 7.4V approx.: 2860 mA
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 8,4 V
http://i685.photobucket.com/albums/vv211/brianpreddy/null-7.jpg
All items are plus postage
Add £4.70 for the speedo, servo, motor
£10 for the car
I will combine postage
Or everything for £195 posted
Comes with Carbon Fiber option Chassis, a new clear shell, LMR wing, Core progressive springs,
Proline Holeshot 2 raer tyres and Proline 8175 ribs.
£100
http://i685.photobucket.com/albums/vv211/brianpreddy/null-9.jpg
http://i685.photobucket.com/albums/vv211/brianpreddy/null-5.jpg
Reventon Pro Speedo in Gun metal grey £60ono
http://i685.photobucket.com/albums/vv211/brianpreddy/null-6.jpg
Speed Passion 7.5V3 motor was new for the Euros this year has done 10 x 5 minute runs. £30
http://i685.photobucket.com/albums/vv211/brianpreddy/null-4.jpg
GM HSB 860 BB MG servo £30 (retails for £70)
High-voltage, operating voltage up to 8.4V!
Direct operation with 2-cell LiPo battery packs
Operating voltage range 4.8 ... 8.4 V
Brushless
2 x ball bearings
Metal drive mechanism
Info
High-Voltage Brushless Servo (HBS) HBS (high-voltage brushless servo) combines the performance of brushless technology with all the advantages of the high-voltage servo. In addition to the unparalleled acceleration, greater efficiency, and no wear of carbon brushes, these servos can be supplied with an operating voltage of 8.4V. Direct connection of 2-cell LiPo battery packs is now possiblewith no problem; in addition, these servos also provide top performance at an operating voltage of just 6V. Precision manufacturing and assembly and top component quality provide the servo drive system with uncompromising power and speed. A new dimension in the combination of power, speed, acceleration, precision, and resolution.
Specification
Holding torque 6.0V, approx.: 255 N/cm
Transit speed at 6.0 V, approx. : 0,11 Sek/40°
All-up weight, approx.: 68 g
Angular travel incl. trim, approx. : 2 x 45 °
Transit speed at 7.4V, approx. : 0,09 Sek/40°
No-load current drain, approx. : 46 mA
Torque at 6.0V, approx.: 132 N/cm
Holding torque 7.4V, approx.: 289 N/cm
Charging rate at 6.0V approx.: 2350 mA
Dimensions (LxWxH): 40 x 20 x 40 mm
Torque at 7.4V, approx. : 150 N/cm
Bearings: Lager bb2x
Replacement gearbox: 7990.2
Charging rate of 7.4V approx.: 2860 mA
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 8,4 V
http://i685.photobucket.com/albums/vv211/brianpreddy/null-7.jpg
All items are plus postage
Add £4.70 for the speedo, servo, motor
£10 for the car
I will combine postage
Or everything for £195 posted