SV2 Front Bottom Plate

[westyguesty]

Does anyone shorten the front plate by removing the rear two chassis mounts ?

I have purchased a second hand SV2 and noticed the rear two back mounts removed, all the way up to the next set of screws ?

Not sure if someone has done it on purpose, or to cover up a brakeage.

Thanks

[paulc]

Have seen this done before to make room for a big reciever/electrics, if it was me i'd replace it for a new one and just keep that as a spare

[reelman_fishing]

Does anyone shorten the front plate by removing the rear two chassis mounts ?

I have purchased a second hand SV2 and noticed the rear two back mounts removed, all the way up to the next set of screws ?

Not sure if someone has done it on purpose, or to cover up a brakeage.

Thanks
Only needed if you run stick packs, if you run saddles it’s total safe to remove

[Npdp72]

Some people cut these off to promote chassis flex.

[ulrich]

Found the top deck will crack easier if they are removed

[westyguesty]

Thanks, will replace and keep as spare. Better than braking a top deck.