Chequered Flag Racing
21-08-2013, 10:09 AM
Been used in a Mardave on 1 & 2s.
2s was with 21.t motor
Needs a booster for 1s though.
£45 posted
PP. Please pay the fee's or choose the gift option
manual here
http://www.hobbywing.com/product_show.asp?id=249
Specification
1.1 Output: Continuous 60A, burst 380A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
1.3 BEC: 6V@2A linear mode built-in BEC.
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensored and sensorless brushless.
1.6 Cooling Fan: 5V Note #1
1.7 Suitable Motor:
With 2S Lipo or 4-6 cells NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T
With 3S Lipo or 7-9 cells NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T
1.8 Suitable Car:
1/10, 1/12 on-road or off-road competition (Especially suitable for Super Stock competition).
1/10, 1/8 rock crawler pro race.
1.9 Size: 33mm(L) 28mm(W) 31mm(H) (Cooling fan height included)
1.10 Weight: 46g (Neither power wires nor cooling fan weight is included)
Note #1: The cooling fan gets its power supply from the built-in BEC.
Features
2.1 Smart and small with metal shell.
2.2 Drives sensored and sensorless brushless motors, best control feelings.
2.3 Factory pre-installed supercharged STOCK competition firmware has powerful Boost Timing and Turbo Timing function.
2.4 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
2.5 Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
2.6 Easily programmed with the Multifunction LCD Program Box and USB Link Software.
2.7 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.8 Compatible with all firmware of XERUN-120A-SD ESC and XERUN-60A-SD ESC.
2.9 Plenty of firmware available for all kinds of competitions.
Standard firmware for MODIFY competition.
Supercharged firmware (with turbo timing) for SUPER STOCK competition.
Zero timing firmware for ROAR SPORTMAN race and other fair races.
2.10 Also suitable for rock crawler pro race when using “Crawler” working mode.
Qw8jsPZ7agA
2s was with 21.t motor
Needs a booster for 1s though.
£45 posted
PP. Please pay the fee's or choose the gift option
manual here
http://www.hobbywing.com/product_show.asp?id=249
Specification
1.1 Output: Continuous 60A, burst 380A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3S LiPo.
1.3 BEC: 6V@2A linear mode built-in BEC.
1.4 Resistance: 0.0006 Ohm.
1.5 Motor Supported: Sensored and sensorless brushless.
1.6 Cooling Fan: 5V Note #1
1.7 Suitable Motor:
With 2S Lipo or 4-6 cells NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11.5T
With 3S Lipo or 7-9 cells NiMH, 1/10 on-road>=13.5T, 1/10 off-road>=17.5T
1.8 Suitable Car:
1/10, 1/12 on-road or off-road competition (Especially suitable for Super Stock competition).
1/10, 1/8 rock crawler pro race.
1.9 Size: 33mm(L) 28mm(W) 31mm(H) (Cooling fan height included)
1.10 Weight: 46g (Neither power wires nor cooling fan weight is included)
Note #1: The cooling fan gets its power supply from the built-in BEC.
Features
2.1 Smart and small with metal shell.
2.2 Drives sensored and sensorless brushless motors, best control feelings.
2.3 Factory pre-installed supercharged STOCK competition firmware has powerful Boost Timing and Turbo Timing function.
2.4 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
2.5 Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
2.6 Easily programmed with the Multifunction LCD Program Box and USB Link Software.
2.7 ESC firmware can be updated through the USB adapter in the LCD Program Box.
2.8 Compatible with all firmware of XERUN-120A-SD ESC and XERUN-60A-SD ESC.
2.9 Plenty of firmware available for all kinds of competitions.
Standard firmware for MODIFY competition.
Supercharged firmware (with turbo timing) for SUPER STOCK competition.
Zero timing firmware for ROAR SPORTMAN race and other fair races.
2.10 Also suitable for rock crawler pro race when using “Crawler” working mode.
Qw8jsPZ7agA