Big Dave 1984
03-09-2013, 02:39 PM
Here Is My Spare LRP Flow ESC BNIP. Free Postage £110 Buyer must Pay Paypal fees (£113.94)
Thank you for looking.
57102
LRP 80970 FLOW Works Team Brushless Speed Control
Note: Requires a booster for receiver if using 1S LiPo
LRP celebrates an impressive comeback with the Flow WorksTeam and Flow Competition high-end brushless speed controls. In two years of hard work LRP did it again: another revolution in brushless technology and a new benchmark in high-performance speed controls is ready to conquer the market.
The new Flow speedos are based on a completely new platform, designed from scratch. They replace the existing three SXX Version 2 speedos. Racers can use the Flow speedos for modified and stock racing, for both classes it offers a multitude of setup options.
Optimised cooling, extremely high power output over the entire RPM range and simple but flexible adjustability are only some of the highlights that make the new LRP Flow speedos stand out. The unique software, a heavy copper 8-layer powerboard and the compact 2-piece machined aluminum housing have been never seen before in a brushless competition speed control. Its construction from thermo-conductive aluminium makes the case highly efficient for cooling. LRP is sure that the success story of the LRP SXX speed controls with their uncountable World, European and National Championship titles will continue with the new LRP Flow. The LRP Flow WorksTeam and Flow Competition are the most powerful LRP brushless speed controls ever. Let the energy flow.
Specifications
Multi-mode profile adjustment - 7 fully adjustable parameters for stock and modified: auto brake, feel, torque timing, boost timing, boost angle, boost turbo, cutoff voltage
HD full aluminium case - For lowest core temperature and tough race design
Bulletproof 6V/3A linear BEC
Easysolder U-Tab Design - Heavy copper, multilayer PCB for lowest resistance
X-Brake Pro - New efficient and precise brake software
USB Software Updateability: Benefit from all the latest performance improvements and updates available at www.LRP.cc!
Revolutionary Internal Temp Check System 3 - Allows you to read out the maximum internal temperature for each the speedo and motor
Extra small size - 32x34x21mm for easy installation in all cars
Including plugged high-performance fan
Sensored Brushless System yes Voltage input 3.7 - 7.4V Rated current 400A/phase Typical voltage drop @20A 0.011V/phase Forward/Brake yes B.E.C. 6.0V/3.0A Linear Weight (without wires) 40g Case size 32 x 34 x 21mm Multi-Protection-System 2 yes Internal-Temp-Check System 3 yes Multi mode profile adjustment yes Power wires 3.3mm² Recommended motor limit (at 7.4V) over 3.0T Plugged fan yes
Thank you for looking.
57102
LRP 80970 FLOW Works Team Brushless Speed Control
Note: Requires a booster for receiver if using 1S LiPo
LRP celebrates an impressive comeback with the Flow WorksTeam and Flow Competition high-end brushless speed controls. In two years of hard work LRP did it again: another revolution in brushless technology and a new benchmark in high-performance speed controls is ready to conquer the market.
The new Flow speedos are based on a completely new platform, designed from scratch. They replace the existing three SXX Version 2 speedos. Racers can use the Flow speedos for modified and stock racing, for both classes it offers a multitude of setup options.
Optimised cooling, extremely high power output over the entire RPM range and simple but flexible adjustability are only some of the highlights that make the new LRP Flow speedos stand out. The unique software, a heavy copper 8-layer powerboard and the compact 2-piece machined aluminum housing have been never seen before in a brushless competition speed control. Its construction from thermo-conductive aluminium makes the case highly efficient for cooling. LRP is sure that the success story of the LRP SXX speed controls with their uncountable World, European and National Championship titles will continue with the new LRP Flow. The LRP Flow WorksTeam and Flow Competition are the most powerful LRP brushless speed controls ever. Let the energy flow.
Specifications
Multi-mode profile adjustment - 7 fully adjustable parameters for stock and modified: auto brake, feel, torque timing, boost timing, boost angle, boost turbo, cutoff voltage
HD full aluminium case - For lowest core temperature and tough race design
Bulletproof 6V/3A linear BEC
Easysolder U-Tab Design - Heavy copper, multilayer PCB for lowest resistance
X-Brake Pro - New efficient and precise brake software
USB Software Updateability: Benefit from all the latest performance improvements and updates available at www.LRP.cc!
Revolutionary Internal Temp Check System 3 - Allows you to read out the maximum internal temperature for each the speedo and motor
Extra small size - 32x34x21mm for easy installation in all cars
Including plugged high-performance fan
Sensored Brushless System yes Voltage input 3.7 - 7.4V Rated current 400A/phase Typical voltage drop @20A 0.011V/phase Forward/Brake yes B.E.C. 6.0V/3.0A Linear Weight (without wires) 40g Case size 32 x 34 x 21mm Multi-Protection-System 2 yes Internal-Temp-Check System 3 yes Multi mode profile adjustment yes Power wires 3.3mm² Recommended motor limit (at 7.4V) over 3.0T Plugged fan yes