Jorn 2wd 410 at German nats

[MHeadling]

Pic courtesy of Michael Volmer, looks interesting!

http://i783.photobucket.com/albums/yy114/headling/9442801E-7B05-472E-BD7B-17940237245C-3734-0000059943C7A2BD_zps73ad5eeb.jpg

[Oops]

staggers and no front driveshafts :confused:

[STP]

this picture was taken today at the german 2WD-nats. It looks like Joern and Gerd drove some "slightly" modified DEX410...

some more pictures are posted on the ecc-detmold homepage http://www.eccdetmold.de/neu/2-wd-deutsche-meisterschaft-september-2013/

[Paultje040]

Is the dBoots MultiByte a mandatory tire?

[chet]

I don't think he ever runs a 210 close to kit form anymore.

[OneKiwi]

I don't think he ever runs a 210 close to kit form anymore.

LOL hes been running the alu chassis for what 3 years now and there has been no release... Think how many TD could have sold if they released one early

[Origineelreclamebord]

Underside shot :) This suggests the motor is still up front:
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7670.jpg

Interesting: Alu rear bulkhead around the diff - also, it has no diff in the front.
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7828.jpg

Saddle/stick at the rear, that pretty much confirms the motor position:
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7825.jpg

Some jumping and cornering:
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_8096.jpg
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7702.jpg

There are more on there, just picking out some that I thought were interesting to share so you don't have to search.

By the way, it's indeed kind of true about the DEX210, Jörn has been testing many different things on the 210. No wonder though really, how are they supposed to test new parts otherwise? Speaking of which, check this 210 out:
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7620.jpg

So on this version the shock tower and inner ball studs are clearly mounted seperately, and the shocks are mounted to the back, it even seems to have spacers between the arms and shocks! Both front and rear towers are carbon, and to me the steering rack looks different than the current one... If only the gearbox was a bit more visible, I can imagine they're not just changing the casing... Interestingly though he's not using the front arms as seen at the Euros! Durango have really been a bunch of busy bees lately! :thumbsup:

[mattr]

Underside shot :) This suggests the motor is still up front:
http://www.eccdetmold.de/neu/wp-content/uploads/2013/09/IMG_7670.jpgTime to break out the dremel!!
(I have a spare chassis......)

[CARB]

You know, I just hope that what ever they do and if anything comes out to replace the current DEX210 it is as good, because out of all the RC modelling I have done be it airplanes, helicopters, cars nitro, electric or large scale my DEX210 is the best thing I have ever had

[CARB]

With up coming worlds are Durango looking to build a car that is not a rear motor type but that will work on clay / dirt, any company that can come up with this design will be on to a winner as one car that does both and can be converted in to a four wheel drive will reduce the manufacturing costs.

This could be why they are testing on the four wheel drive platform, interesting times ahead

[AfroP]

associated will win the worlds

[paulj]

associated will win the worlds

Ooooh bold, isn't he bold...

Team AE couldn't even win their own ROAR nationals at the Worlds track! Despite running the C4.2 on a track that had been heavily sugared in to provide a ton of grip they got owned by a rear motor Losi 22 :p

[mattr]

associated will win the worldsthe veteran worlds? They are coming up soon I think.

[NeilRalph77]

You know, I just hope that what ever they do and if anything comes out to replace the current DEX210 it is as good,

It is interesting to note neither JE or MB have the 210 kit listed anymore! never mind out of stock it's simply just not there.

This could be why they are testing on the four wheel drive platform, interesting times ahead

There's been a bit of a to do recently about people running 4wd as 2wd seems everyone's at it.

[fredswain]

Most cars are carbon copies anymore. The B3, B4, and B44 all have the exact same length arms front and rear and the shocks mount in the exact same spots on them all too. You might say that of course this is true since they are all Associated. The Durango 210 also has the exact same arm lengths with the same shock mounting points as the above cars. Swap out some 210 arms for some B4 arms or vice versa. They'll work. You could have a straight armed 210 or a bent arm B4. The 210 was designed around the B4 suspension so it is really a different way of doing the same thing. The same is also true of several of the other cars. Everyone copies everyone else. Is it any wonder that so many of these cars are competitive with each other? In the end it really comes down to driver and their setup. Associated has historically always had the best drivers.

A design like the above or like the Team C TM2 are examples of a different way of thinking about layout and balance, even though the suspension geometry aside from front kick is essentially identical.

[chet]

I agree everyone copies everyone in the RC game. I didn't think B3 arms where the same because of the different offset rims, so I checked there 5mm shorter then the 210's.

My point at the top of the page is that it seems Jorn runs a different car to suit the track he runs on.

I can see turning a 410 into a 2wd would be killer on really high bite astro or really high bite carpet. I guess will see if Jorn ever runs the 410 as a 2wd on oztie? I dout he will?

[fredswain]

I have B3, B4, B44, and 210 cars. I compared all of the arms on their own against each other. The kingpins all line up exactly. The shock mount locations are even in the same relative places. If you measured along the 210 arm itself you'll get an artificially longer number due to the angled nature of the arms. The B3 had the same offset wheels. The B2 didn't but then again it also didn't have the same length arms.

[magnus]

Slightly off topic but it will be interesting to see if they will build the new 4wd around this layout as well. Pack next to each other and maybe a "low" drivetrain as all the other 4wd cars have nowadays. If they choose this chassi, will it loose the rear kick the 410 has. I've always found the rear pivot really high compare to other cars.

[chet]

I have B3, B4, B44, and 210 cars. I compared all of the arms on their own against each other. The kingpins all line up exactly. The shock mount locations are even in the same relative places. If you measured along the 210 arm itself you'll get an artificially longer number due to the angled nature of the arms. The B3 had the same offset wheels. The B2 didn't but then again it also didn't have the same length arms.

I grew up running the rc10 then got the b2 then the b3. I still have all the rims and I still have the cars that's how I checked the arms. I measured the arms with a caliber and they where 5mm shorter. How is the hinge pin in the same spot when the rim offset is not the same? AE changed the rims when the b4 came out to make it like the losi...

Here's a ebay link with a guy selling the rims stating there the same...
http://www.ebay.ca/itm/ASSOCIATED-RC10-B2-B3-WHEEL-TIRES-REAR-2-2-WHEELS-REAR-FRONT-RIMS-NEW-2-2-S-/390610458343

[dex210Nick]

I found the main on youtube. You can see at one point in the video it is the 4wd car when Jorn flips right in front of the camera. The car looks pretty good on the 'turf. I wonder if we'll see more of this in the future.

Pz7OUbMexCY

[rcjunky]

The ano is almost all gone on the wide chassis 4wd so he's ran it for a bit now, interesting...

[maineyak]

What shell is that on Jorn's 410?

[Origineelreclamebord]

What shell is that on Jorn's 410?

Seems like this one:
http://prolineracing.com/bodies/2012-bulldog-clear-body-trf502x/

[maineyak]

I think you are right!

The Bulldog for the Tamiya 502 rather than the Bulldog specifically designed for the 410????

http://www.redrc.net/2012/02/pro-line-2012-bulldog-for-dex410-dex210/

[DEXtrain]

Any more pics of this baby? Are they gonna sell a conversion? Would love to run my DEX410 in both 2wd and 4wd

[maineyak]

Oh I see now. Jorn was using a wider chassis here (from the proto V4) so he needed a wider body so went for the Tamiya example I guess...