View Full Version : Hyper h2 pro, first purchases

11-09-2013, 06:14 PM
Hello, sorry for my english, but I use google translator.
I bought a hyper h2 pro, you soon will come to me.

esc 120A(Hobbiking X-car 120A)
I run on carpet and I wanted to buy a 7.5T motor (Turnigy Tracstar 7.5T
or is it better another, maybe a 10.5T)?

Such as batteries, I do not know what to choose, because I do not know the space of the battery compartment.
http://www.hobbyking.com/hobbyking/store/__23134__Turnigy_nano_tech_Shorty_4200mah_2S2P_65_ 130C_Hardcase_Lipo_Pack_ROAR_APPROVED_.html
http://www.hobbyking.com/hobbyking/store/__17270__Turnigy_nano_tech_4850mah_2S3P_50_100C_Ha rdcase_Lipo_Saddle_Pack_ROAR_APPROVED_.html
http://www.hobbyking.com/hobbyking/store/__17274__Turnigy_nano_tech_5000mah_2S3P_30_60C_Har dcase_Saddle_Lipo_Pack_ROAR_APPROVED_.html
http://www.hobbyking.com/hobbyking/store/__17266__Turnigy_nano_tech_5100mah_2S3P_65_135C_Ha rdcase_Lipo_Saddle_Pack.html

I wanted to buy from hobbyking . com (Turnigy nanotech), I recommended the batteries most appropriate?

Can you help?
Thank you.

Ps. tires that I will use: Shumacher minipin yellow

11-09-2013, 07:23 PM
if you have never raced before then the 10.5t will be the better motor
the car itself is very strong but I would upgrade the rear drive shafts.
on carpet schu yellow minipin will be fine on the rear but I would run a yellow 2wd minispike on the front as in mid motor form the car has a lot of steering.

for in doors I usually run 4wd fronts stretched on to the rear to reduce rear end grip and allow the car to pivot more in the corners.

11-09-2013, 07:36 PM
In my indoor track (carpet) make a lot of races and I would like to participate.
I would not be last with a motor 10.5T.

I do not know the difference between 7.5 or 10.5T motor.
The straight line is not more than 10 mt.

The problem are the batteries, who can help me?

11-09-2013, 08:02 PM
Just FYI the driveshafts have now been updated and have a 1.5mm pin instead of the 2mm pin so are much stronger

Losi 22 drive shafts/pins are a direct fit to the H2 if you prefer

11-09-2013, 08:06 PM
I get an answer too? I have orders on hobbyking open, and I would like to close it.

11-09-2013, 08:10 PM
All of the batteries you have listed will fit the H2

I use a shorty pack in my H2 as do quite a few of the team drivers

The good thing of you go for the saddle pack you can use this in a 4 wd too in the future

11-09-2013, 08:13 PM
This is a great starting set up for indoor carpet, use mini pin rear and cut stagger front tyres from schumacher in yellow compound


11-09-2013, 08:23 PM
great, so I confirm this?
http://www.hobbyking.com/hobbyking/store/__23134__Turnigy_nano_tech_Shorty_4200mah_2S2P_65_ 130C_Hardcase_Lipo_Pack_ROAR_APPROVED_.html
or this:
http://www.hobbyking.com/hobbyking/store/__17270__Turnigy_nano_tech_4850mah_2S3P_50_100C_Ha rdcase_Lipo_Saddle_Pack_ROAR_APPROVED_.html

I hope you have evaluated the absorption of my engine:
http://www.hobbyking.com/hobbyking/store/__21960__Turnigy_TrackStar_7_5T_Sensored_Brushless _Motor_5135KV.html

I promise, do not get annoyed after anymore.

11-09-2013, 08:29 PM
Yes all of the battery/motor listed will be fine in the H2

I would go for the shorty pack myself

11-09-2013, 08:34 PM
really thank you.