Steve Cole
29-10-2013, 11:32 PM
Reluctantly my one of a kind custom built HPI Savage Flux is now going up for sale, I built it from the ground up only ever using new parts but iv had a change in heart and i now fancy a buggy of some description. This truck has a huge spec and a large amount of parts to go with it, so enough talking hear goes the spec:
1) Innovative RC V2 LST Shocks + 5mm Aluminium Mounting Kit
2) 2X custom built diffs for the centre, 1 is a hoboa spider diff and the other is a HB Diff using the Innovative RC Diff cups Hot Bodies hardened gear set with the HB hardened spur gear.
3) Alza racing diff conversion
4) Alza racing 1/8th 5B 5mm TVP’s with roof and skid plate.
5) Alza racing jumbo servo mount
6) Alza racing heavy duty dog bones
7) Alza racing bulkhead braces
8) Alza racing bulkhead plates
9) Integy steering knuckles
10) Integy caster blocks
11) Integy upper arms
12) Integy steering bell crank
13) Integy Shock Towers
14) Spare Integy Piggy Back Shocks
15) Integy Motor mounts, heat sink and battery box mounts
16) RPM Lower Arms
17) Savox Jumbo Metal Geared Servo.. 40KG! (SAV-SV0236MG)
18) Full heavy duty gearbox, HD Drive Gears, High Speed Idle, Titanium Shafts, Integy 44T Metal Spur and heavy duty slipper pad, sealed bearings
19) Turnigy 5000mah 11.1v 3s Lipo 35-70c X2
20) HPI Flux brushless system (Blur ESC same as castle Mamba) Torx 2200Kv Motor
Think I have listed its main features other than the stack of spare etc. This truck really is am awesome bit of kit! And it is like new due to the fact its not 100% finished.... It runs, drives, steers etc however run times are limited as it’s such a heavy beast it could ideally do with a 1717 motor, different gearing or possibly a smaller lipo should sort is as i have found it cuts out off road as it gets to warm. I was going to sort it over winter however i have lost interest. It does come with the castle link cable so you could adjust the power which could help keep it cooler and it also has a couple of different pinions.
As I have said it does all work and there is in the region of £2000+ hear I have just lost interest now, I may split if enough people want different things and likewise I may also trade plus cash my way for a buggy of any scale really. 1/8th, 1/10th, Mini 8ight Durango etc, just let me know what you have and your offers and i will consider everything and get back to you :thumbsup: All you will need is a handset and a charger, I can chuck a 2.4ghz Ansman handset in if required? However I don’t have a spare lipo charger.
I’m asking £1200 ONO which considering a bog standard truck is £600 plus Lipo’s makes this a bargain as it has had everything done and is in near mint condition.
Thanks for looking
Steve
1) Innovative RC V2 LST Shocks + 5mm Aluminium Mounting Kit
2) 2X custom built diffs for the centre, 1 is a hoboa spider diff and the other is a HB Diff using the Innovative RC Diff cups Hot Bodies hardened gear set with the HB hardened spur gear.
3) Alza racing diff conversion
4) Alza racing 1/8th 5B 5mm TVP’s with roof and skid plate.
5) Alza racing jumbo servo mount
6) Alza racing heavy duty dog bones
7) Alza racing bulkhead braces
8) Alza racing bulkhead plates
9) Integy steering knuckles
10) Integy caster blocks
11) Integy upper arms
12) Integy steering bell crank
13) Integy Shock Towers
14) Spare Integy Piggy Back Shocks
15) Integy Motor mounts, heat sink and battery box mounts
16) RPM Lower Arms
17) Savox Jumbo Metal Geared Servo.. 40KG! (SAV-SV0236MG)
18) Full heavy duty gearbox, HD Drive Gears, High Speed Idle, Titanium Shafts, Integy 44T Metal Spur and heavy duty slipper pad, sealed bearings
19) Turnigy 5000mah 11.1v 3s Lipo 35-70c X2
20) HPI Flux brushless system (Blur ESC same as castle Mamba) Torx 2200Kv Motor
Think I have listed its main features other than the stack of spare etc. This truck really is am awesome bit of kit! And it is like new due to the fact its not 100% finished.... It runs, drives, steers etc however run times are limited as it’s such a heavy beast it could ideally do with a 1717 motor, different gearing or possibly a smaller lipo should sort is as i have found it cuts out off road as it gets to warm. I was going to sort it over winter however i have lost interest. It does come with the castle link cable so you could adjust the power which could help keep it cooler and it also has a couple of different pinions.
As I have said it does all work and there is in the region of £2000+ hear I have just lost interest now, I may split if enough people want different things and likewise I may also trade plus cash my way for a buggy of any scale really. 1/8th, 1/10th, Mini 8ight Durango etc, just let me know what you have and your offers and i will consider everything and get back to you :thumbsup: All you will need is a handset and a charger, I can chuck a 2.4ghz Ansman handset in if required? However I don’t have a spare lipo charger.
I’m asking £1200 ONO which considering a bog standard truck is £600 plus Lipo’s makes this a bargain as it has had everything done and is in near mint condition.
Thanks for looking
Steve