Balancing Harness wiring

[DCM]

Right, I got a balance charger, it comes with the normal, 3 pin wiring harness, but my cells come with the small balancing port like the Trakpower, can someone confirm if I am correct in my thoughts for the connections...

Pin 1 - black wire - negative connection for battery pack
Pin 2 - blue wire - balancing connector
Pin 3 - red wire - positive connection for battery pack

[mark christopher]

not sure on the configuration but this may be the lead you need thats pre wired Tp2s-jstxh

[DCM]

got a pic of that Mark, as I don't intend to buy a harness when I got all the bit parts here to make it

[mark christopher]

no sorry itas a new part in, no pic yet

[DCM]

this is how I was going to make one http://images.google.co.uk/imgres?imgurl=http://www.rcdude.com/catalog/HP-LB10-CAR2_thumb.jpg&imgrefurl=http://www.rcdude.com/servlet/the-Connectors-%26-Cables/Categories&h=75&w=100&sz=8&hl=en&start=26&um=1&usg=__Xjko4-waun7D4Gyk73ghgNn_Ssg=&tbnid=YRWktfXTCCM5UM:&tbnh=61&tbnw=82&prev=/images%3Fq%3Dlipo%2Bbalance%2Bleads%2Btrakpower%26 start%3D18%26ndsp%3D18%26um%3D1%26hl%3Den%26client %3Dfirefox-a%26rls%3Dorg.mozilla:en-GB:official%26sa%3DN