Oh How Original
10-12-2013, 06:31 PM
Just a couple of things, prices INCLUDE postage and Paypal fees as they should!
Prices aren't set in stone, but I'm not open to stupid offers.
I'm not in any rush or desparation to sell these items, if they don't sell, it'll all go back together and get bashed after Christmas and New Year is out of the way.
I maybe open to swaps, I don't have anything particular in mind really, so just shoot me a PM if you've got something to swap.
And lastly, please look closely at the pictures, I take good quality bright pictures so you can actually see what you're buying, if you require specifics pictures of anything, please inbox me and I'll take them, it's no trouble, I know some sellers complain about taking pictures of stuff but I'd prefer to do too many than not enough.
Or if you have any other questions, just ask :)
First up is the roller.
In good overall condition, small hole in the receiver box from where the killswitch light was sat.
Bearing all run smoothly, also I forgot to picture it but the cage does come with this, you'll need the black fuel pipe, which are about £2.50 on eBay.
Rose rear joints, Hitec HS-645MG on throttle/brake and a jumbo Hitec on the steering, I'm 99% sure the steering is a Hitec HS805BB, the reason I say this is the sticker is a bit worn, but it's definitely a Hitec jumbo.
I'm asking £140.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3073_zpsfe07453a.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3072_zps891d767d.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3081_zps7b833a6e.jpg[/URL]
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3083_zpsd91667f0.jpg[/URL]
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3084_zpsd29ccc86.jpg[/URL]
Next up is the engine, the cylinder/bottom end is a Zenoah G260RC, the top end is a CY 23cc.
The original top end is included but it needs a new piston ring and possibly piston.
The spare head/piston is the 26cc G260RC, so you'll need the respective piston ring.
There is also a complete carb included and some misc carb parts for rebuilding/repairing etc... The flywheel is new, as is the shroud, their is also an air filter cover which stupidly I forgot to picture, but is new and included, the spark plug is new and the carb has also just been rebuilt and their is new gaskets on every part of the engine apart from the cylinder as it didn't need one.
This has recently been rebuilt and is 100% FULLY working... I had it in the Marder running up and down my street just yesterday and it performed flawlessly, their is no returns on the engine due to the nature of our hobby.
I'm asking £75 which I think is fair.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3068_zps7030ee45.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3069_zpsca5d3e4e.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3070_zps42bf81b5.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3071_zps038af52f.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3067_zps75c80025.jpg
Next up is the shell, it's a VW Beetle (old discontinued one) with parts of the tub, it has been cut by the previous owner for reasons unknown, but it still mounts the same, it comes with hardware for the sides but not the rear part, it's just a couple of nuts and bolts :)
It's got some cracks where the body mounts go, it could do with either fibreglass and new holes or shoe goo and new holes, I just never got round to doing it, also has some that have been cable tied at the rear, again a bit of shoe goo or fibreglass would do the job perfectly.
It also comes with a spoiler and some other side rail mounts, which I can only presume are for the original Marder shell? In case you want to switch it back.
I really don't know what this is worth, it'll cost a bit to post due to the size and weight though, so I'm very open to offers on this but to keep within the Forum rules I'll put it at £60.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3074_zpsd4b4dbdf.jpg
Next up is the radio gear, it's an Ansmann W3.1 transmitter with an R3.1 receiver.
The receiver has had a small portion of the plastic cut out, by a previous owner, not sure why, my guess would be to make it easier to plus the wires into.
Theirs also been a small repair on the aerial, again by the previous owner, but it still works 100%, I had the Marder running on this radio gear going up and down the street yesterday, and it worked perfectly.
I'm asking £35 for the pair.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3075_zpsd3a85595.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3076_zps358d9ef0.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3080_zps2c749b9d.jpg
Prices aren't set in stone, but I'm not open to stupid offers.
I'm not in any rush or desparation to sell these items, if they don't sell, it'll all go back together and get bashed after Christmas and New Year is out of the way.
I maybe open to swaps, I don't have anything particular in mind really, so just shoot me a PM if you've got something to swap.
And lastly, please look closely at the pictures, I take good quality bright pictures so you can actually see what you're buying, if you require specifics pictures of anything, please inbox me and I'll take them, it's no trouble, I know some sellers complain about taking pictures of stuff but I'd prefer to do too many than not enough.
Or if you have any other questions, just ask :)
First up is the roller.
In good overall condition, small hole in the receiver box from where the killswitch light was sat.
Bearing all run smoothly, also I forgot to picture it but the cage does come with this, you'll need the black fuel pipe, which are about £2.50 on eBay.
Rose rear joints, Hitec HS-645MG on throttle/brake and a jumbo Hitec on the steering, I'm 99% sure the steering is a Hitec HS805BB, the reason I say this is the sticker is a bit worn, but it's definitely a Hitec jumbo.
I'm asking £140.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3073_zpsfe07453a.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3072_zps891d767d.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3081_zps7b833a6e.jpg[/URL]
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3083_zpsd91667f0.jpg[/URL]
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3084_zpsd29ccc86.jpg[/URL]
Next up is the engine, the cylinder/bottom end is a Zenoah G260RC, the top end is a CY 23cc.
The original top end is included but it needs a new piston ring and possibly piston.
The spare head/piston is the 26cc G260RC, so you'll need the respective piston ring.
There is also a complete carb included and some misc carb parts for rebuilding/repairing etc... The flywheel is new, as is the shroud, their is also an air filter cover which stupidly I forgot to picture, but is new and included, the spark plug is new and the carb has also just been rebuilt and their is new gaskets on every part of the engine apart from the cylinder as it didn't need one.
This has recently been rebuilt and is 100% FULLY working... I had it in the Marder running up and down my street just yesterday and it performed flawlessly, their is no returns on the engine due to the nature of our hobby.
I'm asking £75 which I think is fair.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3068_zps7030ee45.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3069_zpsca5d3e4e.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3070_zps42bf81b5.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3071_zps038af52f.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3067_zps75c80025.jpg
Next up is the shell, it's a VW Beetle (old discontinued one) with parts of the tub, it has been cut by the previous owner for reasons unknown, but it still mounts the same, it comes with hardware for the sides but not the rear part, it's just a couple of nuts and bolts :)
It's got some cracks where the body mounts go, it could do with either fibreglass and new holes or shoe goo and new holes, I just never got round to doing it, also has some that have been cable tied at the rear, again a bit of shoe goo or fibreglass would do the job perfectly.
It also comes with a spoiler and some other side rail mounts, which I can only presume are for the original Marder shell? In case you want to switch it back.
I really don't know what this is worth, it'll cost a bit to post due to the size and weight though, so I'm very open to offers on this but to keep within the Forum rules I'll put it at £60.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3074_zpsd4b4dbdf.jpg
Next up is the radio gear, it's an Ansmann W3.1 transmitter with an R3.1 receiver.
The receiver has had a small portion of the plastic cut out, by a previous owner, not sure why, my guess would be to make it easier to plus the wires into.
Theirs also been a small repair on the aerial, again by the previous owner, but it still works 100%, I had the Marder running on this radio gear going up and down the street yesterday, and it worked perfectly.
I'm asking £35 for the pair.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3075_zpsd3a85595.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3076_zps358d9ef0.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3080_zps2c749b9d.jpg