PDA

View Full Version : Dex210 On power Steering


ringa
12-12-2013, 03:52 PM
Hi,
How can I make my DEX210 turns more agressive ?!?
For example I would like to turn short while applying power, not get wider !??!
Thanks for your help.

Danosborne6661
12-12-2013, 04:40 PM
Post your existing set-up and we'll be able to tell from that.

Chris Doughty
12-12-2013, 05:13 PM
as Dan said, post your full setup and people will be able to help advise you better.

but off the top of my head, if you're running a ball diff, try a gear diff, I always find that the gear diff always stays tighter on corner exit where a ball diff always wants to square up more.

Thanks
Chris

Danosborne6661
12-12-2013, 05:26 PM
Depending on springs, may be worth stiffening the rear? That way when you nail it the back squats down less leaving you more steering up front.

mrspeedy
12-12-2013, 08:28 PM
Try softer front springs or loosen up yer slipper a little ...

ringa
17-12-2013, 01:36 PM
Thanks all for your interest & reply.
My setup : Front 350wt oil, Black spring, rear 450wt oil, black spring. Height 18mm both rear & front. Tires I am using Schumi cut's low profile in the front & Dboots multibyte rear.
I am thinking about increasing caster setting through inserts, or increasing rear shock oil to rotate back more !??!

mattr
17-12-2013, 02:00 PM
Most set ups use heavier oil in the front. Not the rear.
Also, by black springs, do you mean painted black, as all durango big bore springs are, or actually black rated springs. (Hint, neither the rtr or kit come with black springs, the actual rating of the springs is shown by the small patch of paint on one end of each spring)

Try petitrc.com or team durangos home page for set ups.

funkygrump81
18-12-2013, 12:36 PM
Also what surface are you runningon as your tyre choice dont really go together ??