PDA

View Full Version : TM2 Wheels


danharding
01-01-2014, 08:38 PM
What other wheels fit the TM2 front and rear?
Thanks in advance Dan.

Smartalec
01-01-2014, 08:56 PM
What other wheels fit the TM2 front and rear?
Thanks in advance Dan.

Any 12mm hex wheels (Kyosho, Associated)

danharding
01-01-2014, 09:13 PM
Cheers Alec are they all the same offset then?

cigbunt
01-01-2014, 09:33 PM
schumacher hex as well...

brooksy
01-01-2014, 10:12 PM
Jconcepts(associated)and as above,I use shuey black wheels on mine.

Phill

AmiSMB
02-01-2014, 04:27 PM
Hi Dan,
You can also run XRAY and Durango wheels on the rear if you use the Team C 14mm hexes. I have measured mine and it is within the 2wd BRCA rules but have not tried one of the actual boxes yet. Might be a problem with mini pins but they say just run Kyosho 12mm hex rims as they have less offset. Not found a way to mount my Durango 2wd tyre stash on the front unfortunately so it is all new hex rims for me.

Cheers

Grant

leelar
02-01-2014, 07:36 PM
i ran the Schumacher black ones but the out side rear always came loose no matter what type of wheel nuts i used

cigbunt
02-01-2014, 07:47 PM
i ran the Schumacher black ones but the out side rear always came loose no matter what type of wheel nuts i used

im finding that but i didn't think it was just the schumacher wheels that did it.. i thought it was in general???:confused:

hotrodchris
02-01-2014, 08:34 PM
I have been running kyosho rims front and rear with no issues

brooksy
02-01-2014, 09:11 PM
I had a back wheel come off on me a few weeks ago,it was a kit wheel though. I was using core serated nuts at the time. Changed to nyloc nuts and it's been fine since.
I don't think it's the wheels,my opinion is that the car generates so much forward traction that it puts a lot of strain on the back wheels and eventually they work themselves loose.
I've had no problems at all with the schuey ones since I started using them.

cigbunt
02-01-2014, 09:39 PM
I had a back wheel come off on me a few weeks ago,it was a kit wheel though. I was using core serated nuts at the time. Changed to nyloc nuts and it's been fine since.
I don't think it's the wheels,my opinion is that the car generates so much forward traction that it puts a lot of strain on the back wheels and eventually they work themselves loose.
I've had no problems at all with the schuey ones since I started using them.

will check my nuts

pez44
09-01-2014, 04:18 PM
Fastrax wheel and tyre sets fit and are great value!