Foxster20
12-01-2014, 06:11 PM
Hi all,
Given that I have recently purchased an Xray for the grip track I have decided to put my drift chassis up for sale.
The chassis is massively hopped up (to beyond what a VIP chassis comes with) using all genuine MST parts. It was purchased at the back end of November as an MS-01D Pro and has been well looked after and only ran with a chassis protector in place. It has cleaned after every outing so needless to say, it is in very good condition and runs beautifully. I will list a basic spec now and will refine it later when I get chance to take some more photo's. In the meantime, here are a few recent photo's and a link to my small thread on here:
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/f6a2d6c132ae618110c3a2e3740f03b3.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/d98a4e512baf62ddca6fd66cf9c74fd9.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/2d1f5b23d437b3eef44077268953fdc8.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/ca99f92a69e2a4cd46b74f343e9c6a13.jpg
http://www.msuk-forum.co.uk/topic/185311-foxsters-ms-01d-possibly-for-sale/
Basic Spec:
Full SSG Chassis Upgrade - including battery holder and shock towers
60deg Front Shafts
Aluminium Front 1-Way
Aluminium Rear Spool
Aluminium Motor/Main Shaft Mounts
Aluminium Front & Rear Upper Bulkheads
Aluminium Front & Rear Bulkheads
Aluminium Motor Mount
Aluminium Steering Arm
Aluminium Steering Posts
Aluminium Front KPI Knuckles
Aluminium Rear Uprights
Aluminium Belt Stabiliser
Aluminium Belt Pulley
Aluminium Dampers
Aluminium Adjustable Damper Caps
Aluminium Spring Cups
Aluminium Servo Saver
Aluminium Servo Mounts
Aluminium Spur Gear Mount
Aluminium Spur Gear Holder
Aluminium Bumper Support Brace
Aluminium Turn Buckles - all round
Aluminium Belt Pulley (18T)
Aluminium Centre Pulley (11T)
Aluminium Low Friction Belt Pulley
Aluminium Wheel Hex's
Steering Adjuster Set
Reinforced Wishbones Front & Rear
Reinforced Damper Maintenance Set
Original Box & Manual
*Roller only - No electronics*
The car will come with standard springs. There will be things that I have missed off but I will try and refine the ad later today. For the chassis which includes everything above I will be looking for around £475 but I can tailor the package so suit any prospective buyer if need be. The buyer can either collect from Teesside or we could discuss postage at the buyers cost. The buyer must pay any PayPal fee's if they choose to use PayPal =].
Given that I have recently purchased an Xray for the grip track I have decided to put my drift chassis up for sale.
The chassis is massively hopped up (to beyond what a VIP chassis comes with) using all genuine MST parts. It was purchased at the back end of November as an MS-01D Pro and has been well looked after and only ran with a chassis protector in place. It has cleaned after every outing so needless to say, it is in very good condition and runs beautifully. I will list a basic spec now and will refine it later when I get chance to take some more photo's. In the meantime, here are a few recent photo's and a link to my small thread on here:
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/f6a2d6c132ae618110c3a2e3740f03b3.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/d98a4e512baf62ddca6fd66cf9c74fd9.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/2d1f5b23d437b3eef44077268953fdc8.jpg
http://i1221.photobucket.com/albums/dd469/Foxster2011/Drift/ca99f92a69e2a4cd46b74f343e9c6a13.jpg
http://www.msuk-forum.co.uk/topic/185311-foxsters-ms-01d-possibly-for-sale/
Basic Spec:
Full SSG Chassis Upgrade - including battery holder and shock towers
60deg Front Shafts
Aluminium Front 1-Way
Aluminium Rear Spool
Aluminium Motor/Main Shaft Mounts
Aluminium Front & Rear Upper Bulkheads
Aluminium Front & Rear Bulkheads
Aluminium Motor Mount
Aluminium Steering Arm
Aluminium Steering Posts
Aluminium Front KPI Knuckles
Aluminium Rear Uprights
Aluminium Belt Stabiliser
Aluminium Belt Pulley
Aluminium Dampers
Aluminium Adjustable Damper Caps
Aluminium Spring Cups
Aluminium Servo Saver
Aluminium Servo Mounts
Aluminium Spur Gear Mount
Aluminium Spur Gear Holder
Aluminium Bumper Support Brace
Aluminium Turn Buckles - all round
Aluminium Belt Pulley (18T)
Aluminium Centre Pulley (11T)
Aluminium Low Friction Belt Pulley
Aluminium Wheel Hex's
Steering Adjuster Set
Reinforced Wishbones Front & Rear
Reinforced Damper Maintenance Set
Original Box & Manual
*Roller only - No electronics*
The car will come with standard springs. There will be things that I have missed off but I will try and refine the ad later today. For the chassis which includes everything above I will be looking for around £475 but I can tailor the package so suit any prospective buyer if need be. The buyer can either collect from Teesside or we could discuss postage at the buyers cost. The buyer must pay any PayPal fee's if they choose to use PayPal =].