PDA

View Full Version : Wire Gauge


Dizzy
05-02-2014, 09:16 PM
Can any body tell me what the best gauge wire is to use with a Speed Passion Reventon pro?

Does the ESC come with wires or is it best to order some.

Just getting back into this and still got lots to learn.

boy_lard100
05-02-2014, 09:25 PM
The speed passion pro comes with the 5 wires you need and a capacitor,
The wires can be a bit short depending on layout and what vehicle it's fitted into,
if I remember correctly it's 14awg wiring included but only 15cm long,

The only thing that isn't included (but comes with there motors) is the sensor wire,
Also with the speed passion motors they run quick change connectors so no soldering needed directly to the motor,

hope this helps

Lee24h
05-02-2014, 09:31 PM
The only reason to order differrent wire is if you want one colour
Or if your running a 5.5t in a 4wd buggy or 4.5t mod touring car i would personally step the wire guage up a bit
Otherwise it ill be fine

Dizzy
05-02-2014, 09:32 PM
Thanks thats perfect.

I am buying a SP combo motor and ESC from new.

Will I still need the 5mm Plugs for the battery (intellect)

Cheers again for the help

boy_lard100
05-02-2014, 09:41 PM
What's it going into?
The speed passion combo comes with everything besides battery plugs,
And the sensor lead is quite short (75mm ish)

Dizzy
05-02-2014, 09:42 PM
Its all going in a DEX210

mattr
05-02-2014, 09:47 PM
Think mine came with 12 gauge.

But either way, the correct wire is in the box. You can go to something else if you want, for most 10th scale buggies/cars either 12 or 14 will be fine. Unless you are running some mega boosted low turn motor in a heavy car.

FWIW, I'm using 12awg in my 210, had 14 in it before, but when I rewired, I only had 12 to hand!

Dizzy
05-02-2014, 09:53 PM
Will get some just in case.

Thanks again for the quick responses and help guys

Jayk
05-02-2014, 11:18 PM
I run reventon with 12g no probs any size will fit the esc itself rule of thumb so i learned is shorter battery wire longer motor.
And the holes for the capacitor connections are close together i have heard of shorts there so make a good solder to the terminals instead.

neallewis
05-02-2014, 11:20 PM
Thanks thats perfect.

I am buying a SP combo motor and ESC from new.

Will I still need the 5mm Plugs for the battery (intellect)

Cheers again for the help

regular 2S stick or saddle hardcase packs use 4mm bullet connectors.

DrPaul
06-02-2014, 12:08 AM
Dizzy, the esc comes with everything you need and are more than up to the job. See you Sunday :)

neallewis
06-02-2014, 04:06 AM
Dizzy, the esc comes with everything you need and are more than up to the job. See you Sunday :)

it does not come with battery connectors, you will need some 4mm bullets as I mentioned above.

AJ Roberts
06-02-2014, 07:27 AM
Certain Intellect and Pro Tek lipos have 5mm bullet connectors now ;)

http://www.amainhobbies.com/product_info.php/cPath/1389_1393_1856_2380/products_id/271106/n/ProTek-R-C-2S-Supreme-Power-Li-Poly-100C-Hard-Case-Battery-Pack-w-5mm-Bullets-74V-7400mAh

Dizzy
06-02-2014, 08:13 AM
Running Intellect Cells so thus the 5mm Plugs.

Cheers for the Help again all.

See you Sunday DrPaul