Chris Harte
04-10-2008, 09:14 PM
Propeak 12V power supply
13.8v, 8.5A Power supply suitable for use with almost all 12v input chargers available today. Despite its compact size, it is still able to deliver currents up to 8.5 Amps. However please note that there is no fuse in the unit so it will blow the fan if short circuited and if you open it up you will void the warranty but if you send it to Rip-max(the distributor) they will happily repair the item though :) . Hardly been used in great condition, fully working. Comes unboxed. Technical Data: • Input Voltage: 230v AC • Output voltage: 13.8v DC regulated • Current rating: 0~8.5 Amps • Output connections: 4mm Banana/Clamps
Nosram 12v Sirus Charger
Feature of the charger:
Fast charge (adjustable from 0.1A to 7.0A in 0.1A steps),
Peak capacity system for perfect charge of all Ni-MH batteries,
Auto restart after a power failure,
Adjustable peak cut off (the higher the mv the hotter the cells at end of charge but more punch)the default setting is 30mv which leaves the cells warm. Can be set as low as 5mv and as high as 80mv.
100% safety cut off (time delay fuse)
Input and output protection against overload, reverse polarity and short circuit
Very easy to use, just press the odd button and you can be charging straight away.
Please note that there is no temperature sensor with this charger as it uses voltage cut off. It does not charge in
linear. It only pulse charges.
Futaba S3003 servo
Standard size servo
Servo can be used at both 4.8v (4 cell) and at 6.0V.
Torque as per futaba site is 44 oz/inch??
Speed as per futaba site is 0.23secs/60°.
Weight as per futaba site is 1.3oz.
Brand new, even fitted to a car!
Vega Flux Competition 27 turn Stock Motor
In great condition,
Recently been skimmed.
Is completely rebuilable.
Does not come with any connectors or the dyno printouts. I lost them.
Orion Rocket Pack 2700. 7.2 stick pack.
New stick pack, never ran in a car, simply charged then stored.
Is fitted with tamiya connectors.
Comes with box.
Intellect 3000 7.v stick pack
Bashed stick pack, bottom heatshrink has broken apart after a fall, cellotaped back down,
Works fine.
Fitted with dean connectors.
Venom Power Battery Jig.
Only used to solder one set of cells together.
Great condition, has loads of life left it in.
Half a bottle of Blue Factor Carpet additive
TT-01 Drift spec
Brand spanking never ever been ran TT-01D
Comes with manual printout off the internet.
Upgraded with an aluminium prop shaft, shocks set up for racing and a bumper for the back.
Drift tyres removed and replaced with some dynamite 16 spoke chrome rims.
Tyres have a groove grip to them and are fitted with foam too.
Shell is a BMW Z3. The wheel wells have been cut out, not the best in the world but ok.
The left hand window has also been removed to aid airflow to the electrics.
The shell has not been drilled to fit a TT-01.(no body mount holes at all) Will supply the Pactra white spray can that I used too.
Shell painted ok. It has bled in quiet a few places. Never been ran but would suit a basher as not
a very well painted shell.
The TT-01 does not come with any spares, just a few screws to finish things off.
http://i63.photobucket.com/albums/h138/klu_klu/0810040062.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040064.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040065.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040067.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture191.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture194.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture196.jpg
I am open to reasonable offers on all items.
13.8v, 8.5A Power supply suitable for use with almost all 12v input chargers available today. Despite its compact size, it is still able to deliver currents up to 8.5 Amps. However please note that there is no fuse in the unit so it will blow the fan if short circuited and if you open it up you will void the warranty but if you send it to Rip-max(the distributor) they will happily repair the item though :) . Hardly been used in great condition, fully working. Comes unboxed. Technical Data: • Input Voltage: 230v AC • Output voltage: 13.8v DC regulated • Current rating: 0~8.5 Amps • Output connections: 4mm Banana/Clamps
Nosram 12v Sirus Charger
Feature of the charger:
Fast charge (adjustable from 0.1A to 7.0A in 0.1A steps),
Peak capacity system for perfect charge of all Ni-MH batteries,
Auto restart after a power failure,
Adjustable peak cut off (the higher the mv the hotter the cells at end of charge but more punch)the default setting is 30mv which leaves the cells warm. Can be set as low as 5mv and as high as 80mv.
100% safety cut off (time delay fuse)
Input and output protection against overload, reverse polarity and short circuit
Very easy to use, just press the odd button and you can be charging straight away.
Please note that there is no temperature sensor with this charger as it uses voltage cut off. It does not charge in
linear. It only pulse charges.
Futaba S3003 servo
Standard size servo
Servo can be used at both 4.8v (4 cell) and at 6.0V.
Torque as per futaba site is 44 oz/inch??
Speed as per futaba site is 0.23secs/60°.
Weight as per futaba site is 1.3oz.
Brand new, even fitted to a car!
Vega Flux Competition 27 turn Stock Motor
In great condition,
Recently been skimmed.
Is completely rebuilable.
Does not come with any connectors or the dyno printouts. I lost them.
Orion Rocket Pack 2700. 7.2 stick pack.
New stick pack, never ran in a car, simply charged then stored.
Is fitted with tamiya connectors.
Comes with box.
Intellect 3000 7.v stick pack
Bashed stick pack, bottom heatshrink has broken apart after a fall, cellotaped back down,
Works fine.
Fitted with dean connectors.
Venom Power Battery Jig.
Only used to solder one set of cells together.
Great condition, has loads of life left it in.
Half a bottle of Blue Factor Carpet additive
TT-01 Drift spec
Brand spanking never ever been ran TT-01D
Comes with manual printout off the internet.
Upgraded with an aluminium prop shaft, shocks set up for racing and a bumper for the back.
Drift tyres removed and replaced with some dynamite 16 spoke chrome rims.
Tyres have a groove grip to them and are fitted with foam too.
Shell is a BMW Z3. The wheel wells have been cut out, not the best in the world but ok.
The left hand window has also been removed to aid airflow to the electrics.
The shell has not been drilled to fit a TT-01.(no body mount holes at all) Will supply the Pactra white spray can that I used too.
Shell painted ok. It has bled in quiet a few places. Never been ran but would suit a basher as not
a very well painted shell.
The TT-01 does not come with any spares, just a few screws to finish things off.
http://i63.photobucket.com/albums/h138/klu_klu/0810040062.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040064.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040065.jpg
http://i63.photobucket.com/albums/h138/klu_klu/0810040067.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture191.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture194.jpg
http://i63.photobucket.com/albums/h138/klu_klu/Picture196.jpg
I am open to reasonable offers on all items.