View Full Version : setup help
guinness
01-04-2014, 03:21 PM
Any suggestions on how to gain more off power steering in on my dex210 please .thanx
My setup https://www.dropbox.com/s/9dv1imb41ebensn/DEX210%20good%20setup%20X-Car.pdf
magictorch
01-04-2014, 04:25 PM
I had the same issue last week, there are several ways. More rear kick up, lower inner ball stud up front. More weight up front, try those in that order. And don't forget to report back your result.:thumbsup:
guinness
01-04-2014, 04:34 PM
I was of the idea the more rear kick up increase stability on bumpy track but reduce steering ??
magictorch
01-04-2014, 04:49 PM
Its the opposite, I run 0 kick up outdoors on bumpy and normaly 1.5 indoors but go to 3 to help with off power steering if needed, try it, you can always swap back if you dont like it:)
guinness
01-04-2014, 07:42 PM
How about the front caster angle ?
magictorch
01-04-2014, 07:49 PM
Yes front caster forgot about that, you can reduce your caster too, 25 is ideal but can only be achieved by butchering some rear inserts. I run 30 but will give 20 a shot soon.
wookieewonder
01-04-2014, 08:04 PM
Check this little guide http://homepage.ntlworld.com/terry.cresswell/covell.html
Bookmark it on your phone, comes in handy at the track!
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.