PDA

View Full Version : My New Quad.


andys
01-04-2014, 04:31 PM
Put this together for a bit of fun - and to learn to fly a bit more in the garden :)

https://dl.dropboxusercontent.com/u/15062770/microquad.jpg

andys
01-04-2014, 06:36 PM
This little Quad is ACE - makes the WL toys ones look silly :)

Fly's like a champ and is very quick and agile - already getting better at flying nose in (when everything is revered) which is why I wanted something decent and small for the garden.

neallewis
01-04-2014, 09:12 PM
looks great Andy. please list the bits you have used.

andys
02-04-2014, 10:34 AM
Hi Neal.

It's basically the Turnigy Micro Quad (from the UK warehouse) with the bits listed in the item listing associated parts.

Turnigy 2900KV motors
5x3 props
I used 10amp esc's as I had 4 spare - but you can use 6 amp ones

All available from the UK warehouse

Also a KK2 board I had spare.

In the item listing there are both 3S and 2S batteries. I went with 3S but it's too much and far, far too powerful so I have ordered some 2S 800mah packs instead.

That's basically it. Flies just like any other KK2 quad - it's super agile and great fun to fly.

PaulRotheram
08-04-2014, 09:04 AM
How much did the above set you back, Andy?

andys
08-04-2014, 09:34 AM
Hi Paul.

Not sure on exact cost as I had bits already (radio / reviver / esc's etc)

I would guess that for just under £100 you can get everything except the radio.

Frame was £8
Motors x 4 was £24 for all 4
KK2 is around £20
ESC's were around £20 for all 4
Props are £2
Lipo's are around £3.50 each (800mah 2S) and I get around 6 mins flying time per lipo.
Lipo alarm £3 ish

Then you need a radio / receiver.

It's great for learning to fly / getting a bit more stick time in our small garden, that's the idea, then hopefully I don't crash the bigger stuff so much....