RC10 WOrlds re-release pics

[tdi250]

Hello peeps,

Some pics of my mate Adey's RC10 Worlds re-release.

He asked me to upload for him cos he's a technophobe! Lol

[adey]

Thanks Wes. I also want to thank xfactor for the paint job. He got it spot on.

[xfactor]

Looking good Adey, that looks like a nice replica of a Associated legends car.

Mr D. ? ;)

[adey]

Yes indeed. Mr Drescher replica sort ov. I don't have his stickers but I am happy with it. He was the local hero racer at marston palmer track back in the day and I wanted a car just like his.

[neallewis]

Looks nice. are those rear tyres just for carpet?

[adey]

They are yes. I am going to try it at my local club on Friday

[adey]

Now shall I call up Fibrelyte and order the tub chassis. Hmmmmm

[ralphee]

That came out fantastic, C/F tub would be superb, wish i could still get them to knock vintage Yokomo ones out.

lee

[adey]

Have you asked them if they still have the mold to do it ?. Martin there is very helpful.

[ralphee]

I think others have tried Ade, but to no avail, i may call them anyhow, would love one for the works and one for the '94, recall Chris Grainger running them back in the good old days before 190mm lol, sadly, can't find pics of his cars!

lee

[adey]

Martin hansell at Fibrelyte did me a mardave cobra one. They are no longer available but he found the mold for me and did it.

[ralphee]

Ill try them mate, just broke out the brush to emulate that shell on a YZ10, not painted for a long, long, wow, long time lol!

Lee

[Buggyman]

I think that's one of the best looking vintage rc10s I have ever seen. I really want that car.

[adey]

Thanks buggyman.

[adey]

Tried the car on carpet last night and got it going really good. I ended up changing oils and pistons in the rear shocks and adding 40g up front. I am going to limit the droop on the front and see what it's like next week. I have installed a brushed system but I'll now get another brushless motor and esc to put in.

[Aussie Top Force]

Thought I'd add some pictures of mine. Haven't fitted electrics yet. Looking at a budget LRP Brushless System in the near future.

[adey]

Like that very much. Anyone else got one ?

[Candyman]

http://www.ukmonsters.co.uk/RC10/02.JPG

[KRob]

Good work :thumbsup:

[Aussie Top Force]

Very Nice Box Art style!

[HyperDunley]

Here is my car.... Not finished yet as still need to install elecs and fit different tyres, but thought I would share anyway :thumbsup:

Can't wait to run this!

http://i263.photobucket.com/albums/ii133/AdamDunley/a6f34c04824bf4fcd14daaaa2547390e.jpg

http://i263.photobucket.com/albums/ii133/AdamDunley/8c781de980c8e5f4c9a9cbf012a6e1dd.jpg

http://i263.photobucket.com/albums/ii133/AdamDunley/8ce0521e3ab2ef255e9d76862ea39882.jpg

http://i263.photobucket.com/albums/ii133/AdamDunley/4d7ceb16dc11172d5a3b5393fcaff644.jpg

[suparajicon]

wow! lets keep them coming!

[Aussie Top Force]

Spectacular! Well executed! You won't miss that on the track.:thumbsup:

[dancr125]

Spray wing or not ?umm

[Aire valley]

Spray wing or not ?umm

I think "yes" ...!
Just look at the one above..!

[bretts]

Hi Aire Valley Alan, isn't it time you dug out Steve's and your 'real' rc10's from your shed and posted some pics on here of how to cut a gold tub down to save weight.:thumbsup:

[Aire valley]

Hi Brett ... I think that the cut down and lightened gold tubs disappeared some years back... However, I do still have Steve's last RC10 gold tub car from late eighties and,of course, my '92 worlds car , in Masamis' colours (painted by Simon Major) and complete with Cliff Letts' transmitter that he gave to me after the '92 Reedy Race..!! Might try and post a picture of that.! ..Happy days :thumbsup:
Incidentally, one of my old cars from back then, was for sale on here a couple of weeks back..it was the full Andy's carbon conversion with body shell painted by Jules from Modelsport...! I swapped it with Andy Smith over 20 years ago..didn't look like it had been run since...was very tempted but have too many old cars..!

[dancr125]

Viper body

[dancr125]

Viper body more

[dancr125]

Viper body

More

[corkyjohnson75]

This is mine what I run some times .

[Aussie Top Force]

This weekend was the Castle Hill Vintage Festival (Sydney, AUS). Ran my Worlds car for the first time and picked up a hard fought 2nd in 2wd Open.

The car is standard, except for green springs. Tires are JC Bar Codes Blue. I ran a Reedy 9.5T which was the perfect amount of power and driveability, through an LRP SXXv2 ESC, Sanwa Servo and M11X.:thumbsup:

[Jez]

ran mine this Saturday at yorcc for the first time.ran in sealed can 540 class,suffered understeer but corner to corner speed was ridiculous.rc10 was built by proracing.spec consists of mtronics ip6 speedo,savox 1251 servo,sanwa radio and Saturn 20t motor.bodyshell is replica of craig drescher's.looks a lot better in natural light.

[MOmo]

Hello peeps,

Some pics of my mate Adey's RC10 Worlds re-release.

He asked me to upload for him cos he's a technophobe! Lol


What tires are those? It looks like an HPI X-pattern radial, but buggy size?



MOmo

[roboliver]

I believe those are pro-line tire and propyl on a 2 inch wheel

[xfactor]

Tyres on (Adey) RC10 pictures are the Schumacher Venom on the rear.

[adey]

Yes they are venom 88 tyres from schumacher. Used on carpet. Xfactor did the paint job.

[Welshy40]

That came out fantastic, C/F tub would be superb, wish i could still get them to knock vintage Yokomo ones out.

lee

Ive got an untouched one if interested. Never got the car to go with the chassis, ended up with a 91 worlds winner instead.

[Jez]

2nd time out at yorcc yesterday.few things changed since first run out 3 weeks ago.most noticeably new shell in brian kinwald replica.front rims trimmed down and standard kit shocks now running losi big bore springs.car seemed to sit a lot better through corners.massive improvement landing off jumps.hopefully a couple more tweaks before next outing should help me keep on the pace of top boys.

[Mushman]

Some great cars being shown here. Retro stuff is like an RC drug. Keep the tuning tips coming. Its good inspiration for my own re-re project. Which has been delayed slightly by life, racing, and every single re-re kit defect known to man. Quality control was pretty pants on these worlds kits (shame really).
She'll be sorted soon though, Looking forward to posting pics when it starts coming together.
Keep'em coming. :)

[fredswain]

I don't like the idea of running wider front axles to push the 2.2 wheels outwards. I know this is similar to running the original sized offset wheels with narrow axles but the older cars had a greater scrub radius than modern cars. I want to keep the more favorable scrub radius. My solution was to 3D model a stock arm and then widen it so that the front end width is where it should be with modern wheels and stock offset axles. The benefit is that the front arms are now close in length to the rear arms. I had them 3D printed. They work great. This is the first version. I'm still going to change them a little bit. I'm also making new rear arms that look stock. They too are slightly wider but when used with B4 cvd's and hubs will give proper width in back with modern offset wheels as well. At that point all 4 arms will be the same length.

[racingdwarf]

This is mine, just fantastic around our old school grass track same pace as my RB6 and the top 22

[Gayo]

I don't like the idea of running wider front axles to push the 2.2 wheels outwards. I know this is similar to running the original sized offset wheels with narrow axles but the older cars had a greater scrub radius than modern cars. I want to keep the more favorable scrub radius. My solution was to 3D model a stock arm and then widen it so that the front end width is where it should be with modern wheels and stock offset axles. The benefit is that the front arms are now close in length to the rear arms. I had them 3D printed. They work great. This is the first version. I'm still going to change them a little bit. I'm also making new rear arms that look stock. They too are slightly wider but when used with B4 cvd's and hubs will give proper width in back with modern offset wheels as well. At that point all 4 arms will be the same length.

Great idea, I would buy some if you want to sell them.

[fredswain]

I'm printing them through Shapeways so when I get the models finalized and tested, I'll make them public so anyone can get them.

[xfactor]

Hi all,

Just thought I would post for those who are interested. I have been working on a RE-RE RC10 WORLDS.

I have worked on the chassis sides and nose. I have also fitted Jconcepts hop-ups. I am just finishing it off and will post pictures in next few days.

I have painted the RC10 WORLDS in the colours of Craig Dreschers 1993 WORLDS car. This is the same as I ran it in 1991/93 but mine was the RC10 TEAM car.:)

[adey]

Like the one you did for me ?

[xfactor]

No matey, very similar but Red, White, Blue and Black :D

[xfactor]

Here are the pictures of the RC10 WORLDS RE-RE. Painted in 1993 worlds Drescher colours. This is how I ran my Team version back in the day. Not 100% finished just need to take the nose down like Dreschers but will do this later on. Running it for the first time on grass at Telfords Western Park Show Saturday...:D:D:D:D:D:D:D:D:D:D:D Cant wait to go back nearly 25 yrs and run a RC10 again.

Loved the build went together perfect. A few Jconcepts hop ups along the way and white RPM Gear cover with White shock adjusters and cups. Decals are as close to Dreschers but also as I ran them back in the day.

Click to enlarge pictures.

[adey]

That car is typical of your attention to detail in terms of the car just being a superb example and built to a very high standard like all the cars you build. I hope you enjoy running it mate . P.s., I still like the one you did for me. Lol

[xfactor]

Cheers Adey.........:thumbsup:

[J'MM'N]

Snap! my 20 year old car.

Good job I'm not at Weston Park this weekend, I think you'll have a blast racing it though.

[xfactor]

:woot::woot: Lovin it JM. They look awesome matey.:thumbsup:

[xfactor]

Just wanted to say how good this car is and after almost 25 yrs of running one it put one big smile on face.......:D

Ran it on grass at Hinckley club yesterday for the first time as didn't make it to telford.

The Worlds wasn't 100% set up right but will be for next week. Even with the set up on it, it was on pace with the modern mids BMAXs, hybrids, YZ2s, B5Ms and Xray 4-2WD.

I made the A final and Q6 and beat the above buggies to make the A final also. Stunning really for a car of 1991 team to 1993 worlds.

I havent had a smile on my face like this for a while absolutely awesome. Well done for the release of this buggy and so glad I went for one.:thumbsup:

[bretts]

Well done!

Car looks amazing, loving the electrics install and the carbon tape on the servo!!

Have a look here, these guys also like an RC10 or two.

https://www.facebook.com/groups/RC10VintageMania/

Nice one.

[xfactor]

Thank you Bretts, Im not on facebook matey :wub

[archtech]

Here's mine, just got it I really like it.

[xfactor]

Looks awesome, wait till you run it. Then you will love it more. I love mine more than the wife.......:D Change the pit towel though it doesnt go with the orange........:thumbsup::thumbsup:

[xfactor]

Ive been working with the file again on the RC10 Worlds. I have filed and polished the,

Sides.
The Rear Sides.
The Rear Bumper, cut filed and shaped.
The front nose is now filed, shaped and polished.

I have also fitted a Associated under chassis protector, Traxxas shocks, RPM front and Rear wishbones and a RPM Worlds front carbon tower to take Front intermediate or long shocks.

Once finished I will post pictures of updates.:thumbsup:

[HyperDunley]

Just wanted to say how good this car is and after almost 25 yrs of running one it put one big smile on face.......:D

Ran it on grass at Hinckley club yesterday for the first time as didn't make it to telford.

The Worlds wasn't 100% set up right but will be for next week. Even with the set up on it, it was on pace with the modern mids BMAXs, hybrids, YZ2s, B5Ms and Xray 4-2WD.

I made the A final and Q6 and beat the above buggies to make the A final also. Stunning really for a car of 1991 team to 1993 worlds.

I havent had a smile on my face like this for a while absolutely awesome. Well done for the release of this buggy and so glad I went for one.:thumbsup:

Hi mate, I love your worlds, it looks amazing. How do you find the 7.5 motor in the car? I assume the gearbox can take it?

Cheers

[xfactor]

Hi Hyper, Thank you.

The 7.5 is fine. I only run it in Blinky mode but the Worlds can more than handle it. Back in the day I ran 10 triple and 11 double with no problems. I run on a grass track too so I would of thought on Astro with less drag would be fine as well. I have fitted weight also to the front and under servo. There is no lift at all on the straight from mid to top speed and nice balance with corner speed. Just playing with set up at the min and changed the Worlds slightly. Once finished I will post pictures.:thumbsup:

[archtech]

Got bored with the 20turn brushed motor and novac vintage speed controller. Pulled thwm out and transplanted my speed passion rev and 10.5 turn brushless. Racing Sunday at batley buggy club. Made mistake with ordering so wont be using the tires I wanted but my bog job seems to be working well. Servo still needs changing as this one seems a little weak at times will post pics after I am happy with electrics and maybe new shell havernt decided yet. Making this car my main because I love how it drives and looks. Im not competing to win A or even B final so id rather look cool and enjoy a good run with an awsome car. Plus I am starting to dislike how little room for electics there is in my b5m. Also yes my rug doesnt match the car if used as pitmat :) .

[simonrhart]

2nd time out at yorcc yesterday.few things changed since first run out 3 weeks ago.most noticeably new shell in brian kinwald replica.front rims trimmed down and standard kit shocks now running losi big bore springs.car seemed to sit a lot better through corners.massive improvement landing off jumps.hopefully a couple more tweaks before next outing should help me keep on the pace of top boys.

Are you racing against the modern 2WD buggies?

[Jez]

Are you racing against the modern 2WD buggies?havent ran it for a while,but yes it was against modern 2wds.i believe theres a video showing a final at yorcc mainly between ross[mb models] and john[elite r/c] using bmax2 rm and serpent srx2 mm.you can see the kinwald replica in a decent 3rd place.ryder too on here also ran rc10 worlds in sealed can 20turn club championship finishing 2nd by only 2 points.that was a rapid well handling car.worth buying one just for smile factor.never sellling mine.

[archtech]

Hi not sure if this is best place to ask this but anyone know where the different colour decals are from on the world's detonator shell http://www.redrc.net/2014/08/jconcepts-rc10-detonator-worlds-bodyshell/ ive been looking and cant find where they are from. id like to get my detinator done like this and the decals would really make it pop so to speak.

[Jez]

i believe they come from a company in america that produced original stickers for Brians car.STICKIT? like this?they cost a small fortune but well worth it being from same company.

[archtech]

Thx for info. It does look awesome.

[xfactor]

Hi all,

Just thought I would update the Worlds for those who are interested.

BLACK MAGIC.........:D:D

I have filed down the chassis more now with a step at front by crush tubes.I have filed the nose and cut and filed the rear bumper plus polished.
I have fitted RPM front and rear wishbones.
I have fitted TRX3 Big Bore shocks rear on front also.
I have fitted XXX Springs these are a direct fit for the TRX3 Shocks.
I have fitted the NEW SLINGA FRONT WEIGHT. This weighs in at 50g and is a direct fit. Its been made to the same thickness as the 3 washers.
I have also fitted a Associated chassis protector.:D:D:D:D:D:D:D

I have also had a RPM WORLDS front tower made in a new design. The base is the standard RC10 fitment with the worlds RPM shock positions. This takes Rear Long shocks or intermediate.

I love this car more than my wife so I have decided to do a GOLD TUB with Worlds car fitted.:thumbsup::thumbsup:

Click to enlarge pictures

[gainsy]

:thumbsup: The hard work has paid off fella as that looks stunning :thumbsup:

Dam it now i want one :)

[Ross]

I need this in my life :thumbsup::thumbsup::thumbsup:

thanks for sharing :thumbsup:



Hi all,

Just thought I would update the Worlds for those who are interested.

I have filed down the chassis more now with a step at front by crush tubes.I have filed the nose and cut and filed the rear bumper plus polished.
I have fitted RPM front and rear wishbones.
I have fitted TRX3 Big Bore shocks rear on front also.
I have fitted XXX Springs these are a direct fit for the TRX3 Shocks.
I have fitted the NEW SLINGA FRONT WEIGHT. This weighs in at 50g and is a direct fit. Its been made to the same thickness as the 3 washers.
I have also fitted a Associated chassis protector.:D:D:D:D:D:D:D

I have also had a RPM WORLDS front tower made in a new design. The base is the standard RC10 fitment with the worlds RPM shock positions. This takes Rear Long shocks or intermediate.

I love this car more than my wife so I have decided to do a GOLD TUB with Worlds car fitted.:thumbsup::thumbsup:

Click to enlarge pictures

[xfactor]

Thanks for the kind words lads. If you ever need help with parts/part numbers give us a pm.

Thanks again.:thumbsup:

[MHeadling]

Great job, looks amazing!

Can you let me know where you got the front weight from??

[xfactor]

Hi Mark,

Sending pm......;)

[gainsy]

Credit where it's due fella ;) thanks for sharing it

Been thinking about getting an rc10 for a while now as used to get my butt whipped by them back in the day, a mate of mine has kindly lent me his classic to race at this years revival event, literally can't wait :) was going to go down the classic route but after seeing your car i think it is going to have to be a worlds with a few added extras :)

My revival runners

[xfactor]

hahahahahahaha Lovin the sheep dog. Got hair like my Mrs. :D Is it a Monster Beetle.

[gainsy]

Same guy who lent me the rc10 has lent me that as well :)
It's a tamiya lunchbox with a bit added to the front, his inspiration came from the car in the film dumb & dumber

[xfactor]

Awesome hahahahahaha needs big brown ears.......:thumbsup:

[J'MM'N]

Can I ask where you got the front weight from.

You done some amazing work on car, I guess the RC10 bug has bitten:)

[xfactor]

Ok guys & girls.


Slinga weights can be purchased from slinga on here.

Anyone who wants the awesome BLING STING Front weight pm slinga on here he is ready for any pms.........:thumbsup:

They weigh 50g and are a direct fit. Just remove your body post and washers, crack the crush tube side screw, remove the front screw, swivel the brace up and it drops straight in.Then just fit the post on top of weight as the weight is the exact thickness of the 3 washers under the post.........:thumbsup:

Hope that helps everyone.......:thumbsup:

[Craigmase]

The cars on here look cool, here's mine.

http://1drv.ms/1Knbk2G

[xfactor]

Looks awesome Craig:thumbsup:. What are those front tyres.

[Craigmase]

Thanks mate the tyres are

#PL8175-02 - Proline 2.2 4-Rib Tyres M3 - Pair

SKU: PL8175-02



Looks awesome Craig:thumbsup:. What are those front tyres.

[suparajicon]

http://i1167.photobucket.com/albums/q623/rc10t/IMG_1870_zpsmsyehyv1.jpg (http://s1167.photobucket.com/user/rc10t/media/IMG_1870_zpsmsyehyv1.jpg.html)

http://i1167.photobucket.com/albums/q623/rc10t/IMG_1871_zpsxxi4cf1n.jpg (http://s1167.photobucket.com/user/rc10t/media/IMG_1871_zpsxxi4cf1n.jpg.html)

http://i1167.photobucket.com/albums/q623/rc10t/IMG_1869_zpsqv06kukc.jpg (http://s1167.photobucket.com/user/rc10t/media/IMG_1869_zpsqv06kukc.jpg.html)

http://i1167.photobucket.com/albums/q623/rc10t/IMG_1867_zps3h70vsgk.jpg (http://s1167.photobucket.com/user/rc10t/media/IMG_1867_zps3h70vsgk.jpg.html)

http://i1167.photobucket.com/albums/q623/rc10t/IMG_1868_zpsvmnkfuw8.jpg (http://s1167.photobucket.com/user/rc10t/media/IMG_1868_zpsvmnkfuw8.jpg.html)

[xfactor]

Looking good Supar...........:thumbsup: Love the carbon chassis.


Ok Guys/Girls for those who are interested !!!!

While Im waiting on parts for my RC10 Graphite Team Build in Vintage, I have built up a New RC10 Worlds re-re on a GOLD Chassis, Nose Plate and Motor Plate. Along the way with a few changes.......:D

I have also purchased a Penguin Mirage Shell. Must say perfect and includes and rear wing and absolute perfection !!!!! WELL DONE PENGUIN !!!!!.... ........:thumbsup::thumbsup:

I will be painting the Mirage in another shell I used to run. Rory Culls paint scheme, I also ran Marc Neale as well so will do one of them also....:thumbsup:

Hopefully tomorrow the Rory Cull paint will be finished and will post pics once done..............:thumbsup:

[xfactor]

Ok Guys & Girls,

You have seen BLACK MAGIC. Now its time for TERRY'S ALL GOLD :D:D

I have fitted,

Traxxas small bores from TRX-1 with Associated springs, adjusters and cups.
RPM Front and Rear wishbones.
MIP Shiney CVDs.
GOLD Chassis filed and polished
GOLD Nose filed and polished
GOLD motor plate cut, filed and polished
Metal wing buttons
Associated chassis skin
SLINGA WEIGHT
RPM WORLDS intermediate shock tower with intermediate front shocks.

The RC10 is a WORLDS RE-RE with the above fitted.

I have also painted the body in Rory Culls colours another shell I ran back in the day and painted from memory. Next up will be Marc Neales..........:thumbsup::thumbsup:

[xfactor]

TERRY'S ALL GOLD.........:D

Once body has hardened I will mount.


Click to enlarge pics.......:thumbsup:

[Neil78]

Mark thats absolutely stunning mate top job effort on the chassis is worth it and body looks smart with retro colours.

[MHeadling]

Great job Mark, looks superb!

Where do you get the chassis skins from?

Who does your paint jobs?

[xfactor]

Thanks Neil and Mark for your kind words.....:thumbsup:

Mark,

Paint Jobs.

I do all my own paint jobs. I have been painting body shells since 1989 ;)

Chassis skins.

Chassis skins are from JPLmodels in Singapore. www.jplmodels.com You get 2 skins on 1 sheet. The one on the GOLD and the one on the BLACK are off the same sheet. If you look at the main Associated on both cars the Associateds are different colours. :thumbsup:

[MHeadling]

Thanks for the info on the chassis skins

[xfactor]

No probs Mark, Pleasure..........:thumbsup:

[xfactor]

Managed to get body mounted. Again painted in Rory Culls 1990/1991 ish sunburst. Body is a PENGUIN CUSTOM BODY SHELL and is a perfect match and fit. GREAT JOB MR PENGUIN.......:D

Marc Neales Body next.............:D:D:D

Click to enlarge pics

[ralphee]

Mark epic work, really stunning mate, love the Rory Cull car, want lol, ill buy that one off you in a few months time hahaha, seriously, another stellar Sir Lapper bit of goodness!

Bests.....lee

[xfactor]

Im getting this on my RC10 Graphite build. NO NO NO NO They are NOT !!! FOR SALE !!!! :thumbsup::thumbsup:

:lol::lol::lol::lol::lol::lol::lol::lol::lol::lol: :lol::lol::lol::lol: