Oh How Original
06-06-2014, 03:18 PM
With the recent purchase of another RC, I need to free up funds, not to mention space, as the 8ight is going to be better used on a track, this probably won't be getting used much anymore, it's been a very very fun RC to use and been maintained as meticulously as all my RCs do, it hasn't been cleaned for purpose and to be as shiny as possible, it's a used RC, but it's a very well maintained RC.
The Chevy shell has been cut round the front well arches so it doesn't catch the tyres.
The stock shell has seen a bit of abuse and has a couple of small cracks on the rear end, but nothing that matters really, also had a mesh windscreen put in just to keep everything cool, didn't need it after running the electrics, but did it anyway.
Comes with 2 complete sets of wheels and tyres, one set is like new, the others have a bit of wear, but loads of life left in them yet!
The truck itself has a HW WP SC8 ESC 120a with the 4700kv HW motor, it's mental on 2s, I've clocked it at 49mph but it had more to go, the motor didn't even break a sweat (amazingly)
It also has the Avid RC alu hex conversion and alu hexes all round to stop them coming off, it has a steel idler gear as that's apparently something that strips easily, also RPM ball cups all round for a nice snug fit.
Couple of holes near the ESC for cable ties to hold it in, they aren't shown because I'm now using velcro and double sided sticky foam, which seems to work well.
There's a host of spares, including 4 brand new spurs (truck also has a brand new one on) 5 pinions, new front axle carriers, along with new Avid RC alu hexes on them, theirs also standard hexes included and some spare Avid RC alu hexes too.
Theres some brand new bearings, spur gear cover, brand new dog bones, brand new springs (for the FT shocks, but I'll include them anyway, yellow compression rate) spare plastic idler gear and some other goodies you can see in the picture, a pretty complete package really.
The transmitter and receiver I tested but haven't run with it on the new motor and esc, so it will need setting up, however it does work fully and is included in the sale (just needs some batteries as I'm running low)
I think that covers just about everything, if there's anything I've missed or you want specific pictures of anything, please feel free to PM me.
I'm not looking for trades at the moment.
I'm looking for £165, with Paypal fees and postage included, I think with the electrics and hop-ups and spares, that's a pretty fair price.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3893_zpscf83d3e8.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3894_zps14c52d31.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3895_zps9b5aa5f2.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3896_zps342f6155.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3897_zps33c64afb.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3898_zpsd3d11540.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3899_zps8c4699a4.jpg
The Chevy shell has been cut round the front well arches so it doesn't catch the tyres.
The stock shell has seen a bit of abuse and has a couple of small cracks on the rear end, but nothing that matters really, also had a mesh windscreen put in just to keep everything cool, didn't need it after running the electrics, but did it anyway.
Comes with 2 complete sets of wheels and tyres, one set is like new, the others have a bit of wear, but loads of life left in them yet!
The truck itself has a HW WP SC8 ESC 120a with the 4700kv HW motor, it's mental on 2s, I've clocked it at 49mph but it had more to go, the motor didn't even break a sweat (amazingly)
It also has the Avid RC alu hex conversion and alu hexes all round to stop them coming off, it has a steel idler gear as that's apparently something that strips easily, also RPM ball cups all round for a nice snug fit.
Couple of holes near the ESC for cable ties to hold it in, they aren't shown because I'm now using velcro and double sided sticky foam, which seems to work well.
There's a host of spares, including 4 brand new spurs (truck also has a brand new one on) 5 pinions, new front axle carriers, along with new Avid RC alu hexes on them, theirs also standard hexes included and some spare Avid RC alu hexes too.
Theres some brand new bearings, spur gear cover, brand new dog bones, brand new springs (for the FT shocks, but I'll include them anyway, yellow compression rate) spare plastic idler gear and some other goodies you can see in the picture, a pretty complete package really.
The transmitter and receiver I tested but haven't run with it on the new motor and esc, so it will need setting up, however it does work fully and is included in the sale (just needs some batteries as I'm running low)
I think that covers just about everything, if there's anything I've missed or you want specific pictures of anything, please feel free to PM me.
I'm not looking for trades at the moment.
I'm looking for £165, with Paypal fees and postage included, I think with the electrics and hop-ups and spares, that's a pretty fair price.
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3893_zpscf83d3e8.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3894_zps14c52d31.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3895_zps9b5aa5f2.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3896_zps342f6155.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3897_zps33c64afb.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3898_zpsd3d11540.jpg
http://i1333.photobucket.com/albums/w624/PencilLinezDesigns/IMG_3899_zps8c4699a4.jpg