PDA

View Full Version : SC6 setup hints for astro?


Dummy0
16-06-2014, 01:33 PM
Anyone has SC6 setup hints for astro?

charlesk
26-06-2014, 08:45 AM
One of the problems with a new car is that setups aren't readily available.
Had 2 runs with mine and it's very promising. My current setup (still need a bit of work but it works) is:
Mid motor
No anti squat spacer
30 deg front block
Short links at front
Med links rear
550cst oil front 400 rear
Saddle pack
1 deg camber all around
4mm droop limit spacers on front 2mm rear.
Reversed rack
Rest as per manual.
As a starting point should work ok.

Dummy0
27-06-2014, 05:45 PM
Thank you charlesk, sounds like a good starting setup!:thumbsup: