PDA

View Full Version : BJRC thumb screws


ben
07-11-2008, 07:54 PM
The latest product to my mini range :woot:

High quality Brass thumb screws. 4-40 thread so they will fit the B4, B44, BJ4, S4, S44, S2, T4, J82.... Im hoping to make some metric ones with an M3 thread :thumbsup:

http://www.oople.com/forums/picture.php?albumid=24&pictureid=932

Pm me if you want some :thumbsup:

Ben, BJRC parts

bigred5765
07-11-2008, 08:04 PM
Bling!:)

Belsten
07-11-2008, 08:07 PM
how much bj ? :)

ben
07-11-2008, 08:08 PM
4 a pair :yawn: Just waiting for the screws now :D

Belsten
07-11-2008, 08:25 PM
you're waiting to be screwed ???:woot:

ben
07-11-2008, 09:08 PM
you're waiting to be screwed ???:woot:

Cant beat a good screw..:yawn:

mark christopher
07-11-2008, 09:38 PM
ben can you do m3 in alloy?

ben
07-11-2008, 09:45 PM
Yeh sure thing mate :eh?:

rcracer
07-11-2008, 09:48 PM
what about my grip matey you still up for that :D

bigred5765
07-11-2008, 11:03 PM
alloy would be good,

ben
07-11-2008, 11:26 PM
Alloy is ACE.

GRIFF55
08-11-2008, 12:13 AM
how much bj ? :)

Ten Dollar:p:woot:

ben
08-11-2008, 12:17 AM
"ben raises his little finger to side of mouth..... 'one million dollars' " :eh?:

muhahahaha

GRIFF55
08-11-2008, 12:21 AM
What other bits have you planned to make ben?

ben
09-11-2008, 11:19 PM
What other bits have you planned to make ben?

I have a few idea's yeh. Couple of people have asked for some things...

Northy has some of the thumb screws for his RC10 :thumbsup: They look sexy with the trackpower lipo's :yawn:
Nath Rolls tapped some of the thumb screws to M3 thread to go on his X11 they transformed the car to place him 2nd in the B-main at York :woot: :thumbsup:

Back soon with more creative shizz :wub:thumbsup:

BJRC productions/designs/products/ideas...

rcluke
10-11-2008, 06:46 PM
4 a pair :yawn: Just waiting for the screws now :D

:woot::o:eh?: Associated ones are only 3

any chance you could do some polished ones, they would look cool :thumbsup:

Darren Boyle
10-11-2008, 06:53 PM
The Associated blue alloy ones are 5.50..........not 3 :eh?:

ben
10-11-2008, 06:57 PM
:woot::o:eh?: Associated ones are only 3

any chance you could do some polished ones, they would look cool :thumbsup:

Polished what? brass, steel, aluminium? Be a bit more specific! _

Factory Team AS1787 Blue alloy battery strap thumbscrews (TC4, TC5, B44 or B4) 5.50

Taken from the DMS racing site, postage costs aswell? Might be 3 from america but i dont live in america!

ben
10-11-2008, 06:58 PM
The Associated blue alloy ones are 5.50..........not 3 :eh?:

Cheers man :thumbsup:

blitzboy
10-11-2008, 07:07 PM
all im gonna say is shimage bits ben niggs has told me of your bj venture dude keep it going mate but don t ware it out shimage :p

Tom3012
10-11-2008, 07:35 PM
What about some shock bushing for losi shocks Ben? like the ones trinity did? Id buy a pair! Also, the B4 shock tower mounts, like the kfactory ones? they could sell well, specially if coupled with the DMS tower ;)

josh_smaxx
10-11-2008, 07:49 PM
What about some shock bushing for losi shocks Ben? like the ones trinity did? Id buy a pair! Also, the B4 shock tower mounts, like the kfactory ones? they could sell well, specially if coupled with the DMS tower ;)

Shock bushings! :thumbsup: in steel as well i recon, wear better.

rcluke
10-11-2008, 11:03 PM
The Associated blue alloy ones are 5.50..........not 3 :eh?:

i got mine for 3 - from americano ebay though

rcluke
10-11-2008, 11:05 PM
Polished what? brass, steel, aluminium? Be a bit more specific! _

Factory Team AS1787 Blue alloy battery strap thumbscrews (TC4, TC5, B44 or B4) 5.50

Taken from the DMS racing site, postage costs aswell? Might be 3 from america but i dont live in america!

polished brass would be good :thumbsup:

ben
10-11-2008, 11:06 PM
The brass is basically polished. I did get the brasso out last night for the one's on my T4 :blush:

Lee
10-11-2008, 11:15 PM
Benji,

Is this done on a milling machine or on a lathe, i may have a small project for one of my small mods;)

ben
10-11-2008, 11:16 PM
Lathe :thumbsup: Got a milling machine aswell though :eh?:

Lee
10-11-2008, 11:20 PM
i think it could be done on a lathe but may need a chassis milling too.

ben
10-11-2008, 11:27 PM
pm me :D

rcluke
10-11-2008, 11:41 PM
how much for a pair of polished brass ones then ben ?

ben
10-11-2008, 11:46 PM
4 :thumbsup: If you think how much work goes into them there are cheap lol

rcluke
11-11-2008, 08:25 AM
put me down for a pair of brass ones when you get time ben :)

ben
11-11-2008, 08:46 AM
put me down for a pair of brass ones when you get time ben :)

Your on the reserve list :eh?:

ben
11-11-2008, 10:09 PM
Ok im taking orders for thumb screws. Aluminium and brass. PM me with what flavour you want and how many pairs you want. Just so i know how much material i need to buy :thumbsup:

Oh btw they are 4 a pair :thumbsup:

BJRC designs

rcluke
11-11-2008, 10:28 PM
the thread is the same size as associated ones aint it ? :eh?:

Mike Hudson
11-11-2008, 10:31 PM
yes they use the same grub screw!

ben
11-11-2008, 10:34 PM
the thread is the same size as associated ones aint it ? :eh?:

They do indeed, BUT i can do them M3 to fit metric cars like the shpred:thumbsup:

josh_smaxx
12-11-2008, 06:51 PM
Better quality picture :thumbsup:

ben
12-11-2008, 06:53 PM
THEY WILL COME COUNTERSUNK BOTH SIDES!!!! lol. Didnt have a small enough counter sink at the time! :blush:

Thanks for the pic josh :thumbsup:

rcluke
12-11-2008, 06:56 PM
Better quality picture :thumbsup:

are they the sexy brass ones ?? :D

ben
12-11-2008, 06:58 PM
yeyeye