Oliv996
16-11-2008, 02:15 PM
In France, we are still waiting to perform LiPo batteries during official races so I decided to temporary place 5 NiMH cells in my CAT SX LiPo:
http://img505.imageshack.us/img505/166/img1765rv7.jpg
The servo and motor are a little shifted on right side as batteries shifted on center so that the right/left balance is correct (assuming 10g difference between right/left is acceptable):
http://img88.imageshack.us/img88/3613/img1770xo7.jpg
The main issu was to keep the cells in place so I made a battery tray mounted with 2 screws on the LiPo chassis:
http://img88.imageshack.us/img88/861/img1771pg1.jpg
http://img255.imageshack.us/img255/7508/img1772bn4.jpg
The servo's horn has been bent too:
http://img255.imageshack.us/img255/1623/img1775wb5.jpg
http://img505.imageshack.us/img505/166/img1765rv7.jpg
The servo and motor are a little shifted on right side as batteries shifted on center so that the right/left balance is correct (assuming 10g difference between right/left is acceptable):
http://img88.imageshack.us/img88/3613/img1770xo7.jpg
The main issu was to keep the cells in place so I made a battery tray mounted with 2 screws on the LiPo chassis:
http://img88.imageshack.us/img88/861/img1771pg1.jpg
http://img255.imageshack.us/img255/7508/img1772bn4.jpg
The servo's horn has been bent too:
http://img255.imageshack.us/img255/1623/img1775wb5.jpg