Clive Loynes
10-02-2015, 04:21 PM
I understand that these have been found to be a tad fragile and recently Gavin Collingwood asked if I would consider making al aluminium version.
The results can be seen in the pictures below.
The lowest, inboard position corresponds to that of the top setting on the pre-Evo car and a 3mm spacer is required to get back to the standard Evo setting.
The price is £20 for the lugs plus £5 to modify the Rear Shock Tower Mount. I can use the broken one so don't chuck it out!
PM me if interested.
EDIT: I don't seem to be able to add the pictures at the minute but you can see them here:
https://www.facebook.com/pages/Hesketh-Bank-Innovations/768872353145927
The results can be seen in the pictures below.
The lowest, inboard position corresponds to that of the top setting on the pre-Evo car and a 3mm spacer is required to get back to the standard Evo setting.
The price is £20 for the lugs plus £5 to modify the Rear Shock Tower Mount. I can use the broken one so don't chuck it out!
PM me if interested.
EDIT: I don't seem to be able to add the pictures at the minute but you can see them here:
https://www.facebook.com/pages/Hesketh-Bank-Innovations/768872353145927